AutoCad 3D :: Select Mesh Face To Split Failed
Jan 15, 2013Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies
ADVERTISEMENT
Maya Modeling :: Edit Mesh Menu And Select Split Polygon Tool
Jun 3, 2011I am a newbie, and doing the helmet tutorial. It is asking me to go to the edit mesh menu and select the split polygon tool. It isn't there. where is it.
View 5 Replies View RelatedAutoCAD Inventor :: Split Face In Weldment?
Sep 19, 2013I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
AutoCAD Inventor :: Mesh Failed - Mesher Cannot Proceed Further
Oct 31, 2012But during the first analysis, it stopped and gave me a message saying: Improper constraints, material or mesh..Then I went on the internet for finding a solution, I came up with 1 solution - to set Average Element Size to 0.040 instead of 0.100.
After I tried this it came up with yet another "error": Mesh failed: Very large number of elements generated, mesher cannot proceed further!
AutoCAD Inventor :: Split Face Open Loop Error
Dec 16, 2013I am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies View RelatedAutoCAD Inventor :: Showing Split Face In Drawing View
Oct 3, 2012I use the split face tool on my ipt. When i create a idw of this part I want to show the split face line in the drawing. When I initially place the view the line is shown, however when the place view command is finished the line is not shown.
I see nothing obvious in the place view dialog box controlling the visibility of this line............how do i show this line in the view?
Inventor 2012, windows xp
Inventor 2010 Certified Professional
AutoCad 3D :: Convert Polyface Mesh Into One 3D Face
Jan 21, 2012I have a 3d model of a building and all of the faces of the building are of the type polyface mesh. If I use explode, each polyface mesh gets split into individual 3d faces. But, I'd simply like to replace each polyface mesh with a 3d face (not multiple 3d faces). Is there anyway to do this?
The reason I'm doing this is because I'm importing the building model into ray tracing software, but the software doesn't like the building when the faces are of the type polyface mesh.
AutoCAD 2010 :: Importing A Poly Face Mesh
Jan 19, 2012I am trying to import a Polyface Mesh of a road plan to use in Terramodel. Terramodel handles .dwf and .dxf perfectly, but I seem to be having trouble preserving the elevations when importing. The polyface mesh imports in as polylines and without preserving the given elevations. I have used autocad in the past and have access to Autocad Civil 3d 2012 if need be.
Is there an import tool or command I am missing or unaware of that will allow the import to take place successfully?
AutoCad 3D :: Snap To Or Trace Intersection Of Face / Mesh
Nov 15, 2012Is there any way of snapping to an intersection of a surface and a mesh or even the intersection of two surfaces?
View 3 Replies View RelatedRevit :: Split Face On Curve Wall
Oct 12, 2013I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies View RelatedRevit :: Hide Lines Between Split Face Areas?
Oct 27, 2009Is there a way to hide the lines between areas created via the split face tool? If not, my end goal is to have an area on a surface appear a different color than the surrounding area, with no lines between. The surface is the face of an extrusion in an in-place family.
Revit 2009
Revit :: Split Floor Face In Existing Phase?
Sep 20, 2012the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
AutoCAD Visual LISP / AutoLISP :: Convert A Poly Face Mesh To A Solid?
Oct 10, 2011Looking for a lisp to convert a poly face mesh to a solid.
View 1 Replies View RelatedIllustrator :: Mapping Pattern Onto A Face Mesh
Feb 9, 2013I have created an envelope mesh over a photograph of a face and I wish to map a pattern onto the mesh so it looks like a face. (none of the original photographed face needs be visible).
View 3 Replies View RelatedMaya Modeling :: How To Reduce Face / Poly Count Without Distorting Mesh
Aug 3, 2012I have a mesh that is made up of all quads and is a pretty dense object. I need to reduce the number of faces so can make it easier to work with and edit.
Whenever i use the reduce tool it takes my mesh that is all quads and distorts it to create a mesh that looks like the second picture above. How can i reduce my face or poly count without distorting my mesh so badly and keep only quads.
AutoCad 3D :: Select A Hidden Face?
Apr 16, 2011Using autocad 2008
There is a cube.
Solidedit --> Face --> Extrude
I place the pickbox on the front side of the cube, press down Ctrl which highlights the front face, then while still pressing down Ctrl, I press space bar to make the highlight jump to the back face. But when I click it with the mouse, the front face gets selected!
AutoCAD 2010 :: Not Select Vertex To Manipulate Mesh
Oct 22, 2010I'm using AutoCAD Architecture 2010. When in 3D modeling workspace I go to Mesh Modeling tab and draw a mesh box (for example), and then in subobjet panel turn vertex , face or edge on but can not select the vertex etc to manipulate the mesh. Am I doing something wrong for freeform modeling!
View 5 Replies View RelatedAutoCad 3D :: Way To Select Solids By Their Edges Rather Than Face
May 21, 2012In any given shaded visual style, is there a way to select solids by their edges rather than the face? Ideally I would like to have X-Ray visual style turned on and be able to select objects in the background through objects in the foreground. This used to be possible in AutoCAD 2006, but I can't find any variable in AutoCAD 2011 to achieve this.
View 9 Replies View RelatedAutoCad 3D :: Select Particular Face Of Tank Upon Which Want To Align UCS
Mar 2, 2013I have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Select Face In Assembly
Mar 6, 2012I need to be able to pick a face on a part in an assembly inside a iLogic rule. How can I set up the events to suspend the code to have the user pick the face?
View 6 Replies View RelatedAutoCAD Inventor :: How To Create Workplane From A Face Using Select Set
Nov 8, 2012I am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
AutoCAD Inventor :: Change Select Set Face Colour Simultaneously?
Mar 19, 2013Is there any way to change the colour of all faces in a select set simultaneously?
The method I am referring to is when you select faces in a part document, rickt click and select properties from the context menu, a dialog box pops up called "Face Properties" which prompts you to select a colour and click OK. when this is done all of the faces are changed at once.
How do I replicate this via the API?
Currently I have it iterate through each face in a part document and apply the colour override one by one which can take a while when there are about 1000 faces. You can see each face changing as you go.
AutoCAD Inventor :: Select Component Priority No Longer Shows Face / Edge Preview
Dec 12, 2011This has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies View RelatedPhotoshop :: Best Way To Select The Borders Of Face?
Jun 8, 2008What is the best way to select round the borders of a face?
I've been teaching myself to do this using the magic wand, but it's quite time consuming - lots of undoing, trying different tolerance settings, zooming in/out, using polygonal lasso to 'add to selection' the deselected areas etc
Because the hair is dark and the skin is light it seems like quite a long process?
So I'm wondering if this is the best way, and how the pros do it? eg Would they just manually draw round the edges?
Mudbox :: Select Single Face
Apr 18, 2011I am trying to use the sculpt layer symmetry feature to flip some detail onto another side of my model. Mudbox tells me that symmetry is not yet initialized. Some searching told me that I need to set the topological axis for the model. Which in turn tells me I need to select two adjacent faces.
The problem is that using Shift + S does not select a single face rather it selects the one under my cursor and the surrounding faces. Is there another way to select a single face?
GIMP :: Select A Face And Export It?
May 21, 2013how can I select a face from a pic and then export it to another program?
View 4 Replies View RelatedMaya Modeling :: Select ALL The Edges Of A Face?
Oct 5, 2011i am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
3ds Max Modeling :: Select Only Visible Edges On Editable Mesh Object?
Dec 14, 2011Is there a way to select only visible edges on an Editable Mesh object?
View 2 Replies View RelatedIllustrator :: Gradient Mesh - Unable To Select All Points That Are The Same Color?
Sep 20, 2012All I can find online is to highlight over an area to select multiple mesh points. That will not work in my case. I can't tell illustrator to select same color, the way it does with fills and strokes? I want to change the color and I have to click on every single point again? Ridiculous.
View 3 Replies View RelatedMaya Modeling :: Unable To Select Face Of A Polygon
Aug 27, 2012I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
3ds Max :: How To Align (rotate) Object (mesh) To Face Of Another Object
Feb 26, 2013How to align (rotate) an oject (mesh) to a face of an other objetc
View 1 Replies View Related
