GIMP :: Select A Face And Export It?
May 21, 2013how can I select a face from a pic and then export it to another program?
View 4 Replieshow can I select a face from a pic and then export it to another program?
View 4 Replieswhen I anchor the layer face over the background face the floating selection disappears which means I cannot work on the layer face and therfore am unable to erase the layer face into the background face,this is on gimp 2.6
View 4 Replies View RelatedWhat is the best way to select round the borders of a face?
I've been teaching myself to do this using the magic wand, but it's quite time consuming - lots of undoing, trying different tolerance settings, zooming in/out, using polygonal lasso to 'add to selection' the deselected areas etc
Because the hair is dark and the skin is light it seems like quite a long process?
So I'm wondering if this is the best way, and how the pros do it? eg Would they just manually draw round the edges?
I am trying to use the sculpt layer symmetry feature to flip some detail onto another side of my model. Mudbox tells me that symmetry is not yet initialized. Some searching told me that I need to set the topological axis for the model. Which in turn tells me I need to select two adjacent faces.
The problem is that using Shift + S does not select a single face rather it selects the one under my cursor and the surrounding faces. Is there another way to select a single face?
Using autocad 2008
There is a cube.
Solidedit --> Face --> Extrude
I place the pickbox on the front side of the cube, press down Ctrl which highlights the front face, then while still pressing down Ctrl, I press space bar to make the highlight jump to the back face. But when I click it with the mouse, the front face gets selected!
i am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
In any given shaded visual style, is there a way to select solids by their edges rather than the face? Ideally I would like to have X-Ray visual style turned on and be able to select objects in the background through objects in the foreground. This used to be possible in AutoCAD 2006, but I can't find any variable in AutoCAD 2011 to achieve this.
View 9 Replies View RelatedI have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?
View 2 Replies View RelatedI need to be able to pick a face on a part in an assembly inside a iLogic rule. How can I set up the events to suspend the code to have the user pick the face?
View 6 Replies View RelatedI have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
I am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies View RelatedIs there any way to change the colour of all faces in a select set simultaneously?
The method I am referring to is when you select faces in a part document, rickt click and select properties from the context menu, a dialog box pops up called "Face Properties" which prompts you to select a colour and click OK. when this is done all of the faces are changed at once.
How do I replicate this via the API?
Currently I have it iterate through each face in a part document and apply the colour override one by one which can take a while when there are about 1000 faces. You can see each face changing as you go.
In Inventor 2013 when i export face as it is automaticly exported to DWG 2013 version. How to i set it to 2010 version export without having to do it everytime manually? (option then chooose 2010)
View 2 Replies View RelatedThis has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies View RelatedI have a script which saves the flat pattern from a sheet metal part as a dxf file. But we also have standard part files that we save a face as a flat pattern. So I'm looking to be able to select a face then run a script to save the selected face as a flat pattern in a dxf file.
View 1 Replies View RelatedI need to find a way to export the selected face to dwg and to have the Part Number and if possible the description written under the exported face. I don't know if it's possible to do this. I know it's possible to export programmatically the selected face, but is it possible to get the name + description into the drawing too?
We're just looking for a way to "automate" the creation of our laser drawings.
When I use "export face as" to create a DXF file for our lazer table I loose the bend lines in the DXF. Is there a way to retain the lines in order to have the lazer scribe the bend lines for us?
View 4 Replies View RelatedI made a part using the extrude function and cut some texts into the part by extrude (tried emboss) as well. However, when I select the face to export, letters that have area inside, such as "A", "O", etc don't like right because the face selection only selects everything outside the bounds of the letter- so the triangle island part in the "A" and the circular island part bounded by the "O" cannot be selected. This presents a problem for me as I'm trying to use a CNC to cut these letters out with a dxf file to feed my CAM program.
View 9 Replies View RelatedIs it possible to select an area then within that area select by color?
View 1 Replies View RelatedI'm working with GIMP 2.84 for Mac, and my Fuzzy Select Tool is not working. When I choose it and try to select an area, it won't select.
View 3 Replies View RelatedI have a nice .jpg, but the subject has stubble on his face. How can I make him look clean-shaven? Can I do that with GIMP?
View 2 Replies View RelatedBest way to get the colours to be the same when I replace a face onto another face esp if you can lightly dust the colours in so the finished picture looks natural
View 1 Replies View RelatedIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedI would like to know the quickest way to create face in hole type photo templates. I was at Universal studios and was impressed by the speed they could create face on body images.
I am thinking it has to do with lasso select tool with a feather on edges > invert selection.
Also what is the quickest way to make the photo face match the original face color. (is there some kind of color select to do this?)
How to remove a watermark from a pic when it`s crossing a persons face? Found a picture of a friend of mine, so this is just for private use.
View 1 Replies View Relatedi'm trying to plend a face (happens to be Justin Timberlake) into the face of a snake, I have the selection matched up and have the layer mask so i could erase the extra. The main problem I am having is the difficulty of getting the colors and textures right, the actual blending the face in part.
View 5 Replies View RelatedI guess one way to do it would be to capture the color of my facial skin, then paintbrush the area over with that color. But how do i do that? or do you have a better method?
View 1 Replies View RelatedI forgot how to remove the highlight (border) around this face. I try to change background color black to white .
[URL].......
Basically I have 2 images, 1 is a texture background and the other is a face. I wanna create the effect that the face is blended into the photo just like in this one:
[URL]........
I am working on an image of Elvis and using layers and blending techniques to put the music to one of his songs over his face. But I want the musical overlay to mold to the curves of his face. Is there a way to do this? The blend mode I'm currently using is Multiply. I have tried other layer modes but it still does not give me the effect that I'm looking for.
View 10 Replies View Related