Using autocad 2008
There is a cube.
Solidedit --> Face --> Extrude
I place the pickbox on the front side of the cube, press down Ctrl which highlights the front face, then while still pressing down Ctrl, I press space bar to make the highlight jump to the back face. But when I click it with the mouse, the front face gets selected!
I am using Autocad 2013.
I imported two solid models( *.stp) in one workplace. (Drafting & annotation/insert/import)
I am trying to subtract one from another, But one is hidden from another. (smaller one is in the bigger one) To subtract smaller one from bigger one, I need to select small hidden one.
1. How to select the hidden part? I cannot see from outside.
If I have tree view(navigation??), I could simply select one on the tree, But I don't know how to make to pop it up. Instead of clicking icons, I tried to use command, but what each model name is. (I tried imported file name, but didn't work)
2. How to check the model name so that I can use in command?
3. When I use command, I put SUBTRACT - enter , (select object- actually I click on the object) then it shows me "select objects:1 found" but when I hit ENTER, it shows me "no solid, surfaces, or regions selected" How can I properly select the object?
I currently imported two STEP files in one workplace, both are solid. I am working on 3D modeling-solid editing-subtract.
if i have a load of parts in an assembly set so visibility is of, is there a way to group select all hidden parts so they van be made visible again as a group rather than looking through the assembly for them?
View 9 Replies View RelatedIn any given shaded visual style, is there a way to select solids by their edges rather than the face? Ideally I would like to have X-Ray visual style turned on and be able to select objects in the background through objects in the foreground. This used to be possible in AutoCAD 2006, but I can't find any variable in AutoCAD 2011 to achieve this.
View 9 Replies View RelatedI have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?
View 2 Replies View RelatedI need to be able to pick a face on a part in an assembly inside a iLogic rule. How can I set up the events to suspend the code to have the user pick the face?
View 6 Replies View RelatedI am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies View RelatedIs there any way to change the colour of all faces in a select set simultaneously?
The method I am referring to is when you select faces in a part document, rickt click and select properties from the context menu, a dialog box pops up called "Face Properties" which prompts you to select a colour and click OK. when this is done all of the faces are changed at once.
How do I replicate this via the API?
Currently I have it iterate through each face in a part document and apply the colour override one by one which can take a while when there are about 1000 faces. You can see each face changing as you go.
I use auto-select primarily when designing. I will often clicking and dragging a marquee box to select multiple objects. I immediately noticed that it is now selecting hidden layers as well, where it didn't before.
Is there a setting or way to change this? I am assuming as of now that this is a new change. They will still select even if the layers are locked so locking groups is not a solution for this.
This has happened since I updated to 2012 Professional. When I want to use the measure tool or add constrains in assembly mode, the face/edge preview does not show up in red under Select Component Priority. I have to wait for the select other option to come up to see which face I am on. If I click on the face or edge it will show up but not until I do. I don't remember changing any settings that would cause this. I could have the select other option delay set to zero or I could change it to another selection priority but I don't remember having to do that before.
View 2 Replies View RelatedWhat is the best way to select round the borders of a face?
I've been teaching myself to do this using the magic wand, but it's quite time consuming - lots of undoing, trying different tolerance settings, zooming in/out, using polygonal lasso to 'add to selection' the deselected areas etc
Because the hair is dark and the skin is light it seems like quite a long process?
So I'm wondering if this is the best way, and how the pros do it? eg Would they just manually draw round the edges?
I am trying to use the sculpt layer symmetry feature to flip some detail onto another side of my model. Mudbox tells me that symmetry is not yet initialized. Some searching told me that I need to set the topological axis for the model. Which in turn tells me I need to select two adjacent faces.
The problem is that using Shift + S does not select a single face rather it selects the one under my cursor and the surrounding faces. Is there another way to select a single face?
how can I select a face from a pic and then export it to another program?
View 4 Replies View Relatedi am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
i can't be the only one who thinks it's nuts that when 'auto-select > layers' is selected and i drag to select a bunch of layers, i also select layers that are turned off and/or locked, can i?i just confirmed that this IS not the case with CS6 -- locked or hidden layers are not selected upon dragging to select exposed layers.
is this a bug, or a bit of new functionality that i am failing to grasp? i did notice that in CC, on right-click there is the new option to "isolate layers", but this seems to just isolate & unclutter layers within the layers panel.
improve Photoshop CC, but this bug beaks my workflow to the point I can't use it.
Other than this critical bug, the software engineers behind Photoshop CC are doing a great job.
I have attached a picture of what it continues to do when I attempt to select a face of this polygon I revolved from a cv curve tool line. Accidentally copied dual screen. I have been running into countless problems while trying to manipulate this revolved surface like a polygon but there is something stopping me. How do I just select an edge or a face without the entire thing lighting up with yellow dots and not actually selecting anything! I try to hold shift and click other faces but that doesn't work either!
If I could somehow delete the action of revolving a line to treat the independent tessellations as one uniform polygon. I am very new to this program and I don't know where history might be.
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
how to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
Is there a way to use PRESSPULL on a face that's behind or underneath another face. When I use PRESSPULL it always selects the face on top and sometimes I want a face that is behind or underneath that face.
View 3 Replies View Relatedwhen I anchor the layer face over the background face the floating selection disappears which means I cannot work on the layer face and therfore am unable to erase the layer face into the background face,this is on gimp 2.6
View 4 Replies View Relatedhow to put someones face onto another persons face.
View 3 Replies View Relatedcreat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedIn Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
How do you convert a 3d hidden line view in Revit into 2d hiddenline flatten view? Or I have to bring it to AutoCAD to flatten it?
View 1 Replies View RelatedRight now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View Related