if i have a load of parts in an assembly set so visibility is of, is there a way to group select all hidden parts so they van be made visible again as a group rather than looking through the assembly for them?
View 9 RepliesI am trying to make an assembly with certain parts visibility turned off. How is the best way to do that?
Is that a Level of Detail? Is there anything I should watch out for or a best practices on how to do that?
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
View 2 Replies View RelatedI'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
In an assembly with unconstrained parts, if you select multiple parts and drag the parts, only the first selected part moves.Is this just me?
View 3 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View Relatedit is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
View 2 Replies View RelatedI'm building a platform and have sheet metal on top of a tube frame. When I'm zoomed up closely I only see the sheet metal surface. But when I zoom out further some of the tubes start becoming visible through the sheet metal. This happens in just about every assembly. Parts behind other parts start becoming visible when zooming out far enough.
Is there a way to stop this from happening?
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies View RelatedI'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
I am trying to assembled these 2 parts but the elbow gives no options..how can i constrain the elbow to the straight pipe?
View 7 Replies View RelatedHow could I rename a hole assembly and all parts (pre- or suffix)?
View 2 Replies View RelatedI am designing a component whose internal mechanism is housed in a plastic shell. I want to use the boss feature in the shell so I can hold together the components internally, but the boss feature is only available in the part workspace, but in order for me to know where the internal components are so I can design my shell accurately, I have to be in the assembly workspace.
Now, if I opened the shell as a part alone, and imported (through the Derive command) the parts that need to be fit into the shell, they will appear at random positions, and because you cannot create constraints in the Part Workspace, I have no effective way of holding them where they should go.
I have a question about getting CoG of my assembly. The only problem is that i only need 2 parts (the rest are just dummy solids with 'default material'.
When i control select two parts, right click and go 'iproperties' - the physical tab doesn't let me determine CoG of the two parts combined.
I have 4 columns in BOM that I call out in Parts Lists on my drawings.
I need to be able to organize parts in my assembly somehow and to be able to display if needed (on Parts List) only parts belonging to one category (level?).
I could do it by creating another custom iproperty in a part template and each part would belong to a particular group. Then I could sort them in BOM in .iam environment and have particular category visible on Parts List with the other categories with visibility turned off.
I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.
This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't work.
Inventor pro 2012
Win 7 Pro. sp1 64 bit
Intel Core I7-2600 CPU
Ram - 8GB
Quadro 2000 D
Nvidia 275.89 (tested nvidia 296.70 with no luck)
I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.
Autodesk Inventor 2009
When I place parts in my assembly they are stuck in the position I place it and can only be moved once I mate it to another part of my assembly. I have only recently encountered this problem, as usually when I place a parts in an assembly I am able to simply click on the component and drag/move that part around to put it in a place that suits before I use any constraints.
What is the problem, have I clicked on some function unknown to myself which has disabled the ability to move parts/assemblies when I place them into an assembly?
I've created an assembly from the solid bodies of a part. Is there a way to add more parts to that assembly from other solid bodies of the original part? If so what is the procedure?
View 7 Replies View RelatedI have a machine with some internal parts.To see the inside parts i need to make the outside parts Glass.Can i make the outside parts Glass while in the assembly or do i need to open each part up from there folder and make the material Glass.This would be slow if i need to open up each part to make the material Glass and when finished would again have to open the part up and set back to original material.Can all this be done while in Assembly mode?
View 6 Replies View RelatedWhen creating a new part in an assembly and I select a face of an existing component, how does Inventor determine the orientation and origin of that new part? I understand how Inventor works when I select the plane/origin of a part or pick out in space in the assembly.But the placement based on the face of an existing component seems random..
I normally do not like creating parts inside of an assembly but I was trying some new workflows.
I have firgured out how to create a part within the assembly.I have also figured out how to add a feature in an assembly, but that feature does not attach to a
component when I need it to.What I haven't figured out is how to edit an existing part within an assembly to add a feature that references another part. Basically having an external reference (SW term).Also, is there a way to see the features of a part within the assembly?
On a different station, a component was checked oud, altered (100mm became 110mm), the corresponding dwg was also checked out and updated, and then everything was checked in.
Now i have an assembly that contains the part that was modified, but i still have the old version of it stored locally, as well as the assembly containing the part. Now when i open the assembly, i get the message stating some components had changed and that the assembly should be updated. After selecting YES to update the assembly, i get it on screen, but the part itself had not been updated. The vault tree now does show that i don't have the latest version though (red filled circle). In order to get the part to appear correctly, i need to manually select "refresh from vault" to get the correct version.
After selecting the YES i want to update the assembly I expect the parts to be updated properly without requiring additional manual actions. This has already resulted in out-of-date drawings to hit the production floor. Obviously, THIS SHOULD NOT HAPPEN!
I know one way to overcome this issue would be to delete the local source files after having used them, but i have lost plenty of work by allowing that setting to be enabled. (IV crash during check-in resulted in deletion or corruption of the files and they were not properly checked in.)
Should i log this issue or is there a solution available i failed to find?
in my assembly part visibility is controlled by a Ilogic rule which selects an Iassembly. This assembly is a parametric model controlled by excel. The visible parts have to be exported to dxf.
Everything is working (iterating through parts, export sheet metal to dxf), but how can I check whether a part is visible within the assembly?
It is possible to create parts that can update there size from changing the "root" (possibly called the derived-from part??) dimensions. I have a tubular frame structure and there is sheet metal components that enclose this structure.
We make these units in 2 standard sizes, but in the last few months, we have been getting requests from clients for extra components to be installed or sometimes components to be removed. This changes the size of the unit. Also depending on which mine they go to, some need to be shorter or longer and wider or narrower.
I have created a frame that I can change easily to to required dimensions, but it would be a dream if all the sheet metal components updated to the frame size. Most times these doors and sheet metal components stay in the same location, so if everything updated with a simple change to the frame size, that would make my job easier, and leave me more time to create new products.
I can't upload any files due to size, but I have attached a few screen shot to clarify things. Basically it is a frame unit, with doors and access panels to electrical components inside.
is it possible to open all parts in an assembly at once?
I tried to select them all in the modelbrowser, and then open, but ain't working. I tried also with the design assistent, but also not working.
I will use this function to place all (open) parts from an assembly in one drawing. Then i am sure that i don't forget any parts.