I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
I am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
View 2 Replies View RelatedI'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
View 2 Replies View RelatedI'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I am trying to make an assembly with certain parts visibility turned off. How is the best way to do that?
Is that a Level of Detail? Is there anything I should watch out for or a best practices on how to do that?
if i have a load of parts in an assembly set so visibility is of, is there a way to group select all hidden parts so they van be made visible again as a group rather than looking through the assembly for them?
View 9 Replies View RelatedI'm building a platform and have sheet metal on top of a tube frame. When I'm zoomed up closely I only see the sheet metal surface. But when I zoom out further some of the tubes start becoming visible through the sheet metal. This happens in just about every assembly. Parts behind other parts start becoming visible when zooming out far enough.
Is there a way to stop this from happening?
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
What I'm looking to do is show the hidden lines blocked by a part in a plan view but not all of the hidden lines. Ie. I have a top view showing a clearance. If I turn on that clearance a portion of the original part is not viewed. When I turn on hidden lines I now see every hidden detail of that part (I didn't turn on hidden lines for the entire drawing). I then have to eliminate all the lines I don't want which is both tedious and cumbersome. Is there a way to turn on just the lines hidden by a particular object but not all the hidden lines of the part.
View 1 Replies View RelatedI want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
Is it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies View RelatedCan we show or hide the model edges with respect to Features or parts. I think, there must be only two options. ie. "Show all hidden edges" or "show all" and "Hide all edges".
View 3 Replies View RelatedAt the begenning I was thinking that it was just to RMB and select show hidden edged in my drawing but in fact not.
The model look like this :
And in the drawing I have some missing lines :
I tried to display the missing part in a separate drawing and it's OK.
I use Inventor 2011.
I am facing small problem with inverter drafting. I am unable to show hidden line of pattern by direct selection of all object . I have to select one by one item from pattern.
In my drawing there is tie rod item ( find attached file) i have shown hidden line of only this part . and i have to select all items one by one.
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I've just started using Inventor and am getting the hang of things, but one thing that really annoys me is these lines that are all over the parts I use in assembly. Screenshot attached.
View 5 Replies View RelatedAttached shows lines (Parts) are intersecting each other in drafting mode. I have tried all but I am not able to resolve this issue.
View 1 Replies View RelatedI made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
It says i can exclude parts from the assembly, when i insert it as a derived part, but the exclude button is greyed in the insert derived part dialog box.
View 4 Replies View RelatedI have some parts published in the Content Center. I need to modify a dimension on some parts. I can edit the family table and modify it. The new dimensions are right. But if I open an assembly which use older versions of the modified parts, when I try to update the Content Center parts, Inventor says all standard parts are up to date. When I insert the modified from the CC, I obtain the old version.
I don't have local versions of the part.
If I insert the part with option "Update standard parts when insert", I have the old version too.
I have already made these modification on other parts with no problem, what is wrong with this part ?
I use Inventor 2010 SP4.
I have been building an assembly and suddenly I am unable to move parts according to their constraints. I can move them as soon as they are placed but as soon as I add one constraint it's as if they are glued in place. For example, when I line up two holes I can no longer rotate one part around the grounded component.
Have a turned off some functionality of the program?
At my company when producing drawings for manufacture we require a sheet for any steel profiles to be cut!..We do this by selecting the assembly from base view,hitting model view tab, selecting presentation and choosing the relevant profile from the drop down!
Once the profile is placed, we highlight the view and hit the parts list tab which obviously creates a parts list, but for the whole assembly, we then have to edit the parts list by turning off the visibility of the lines of all the parts which are not relevant!!...as you can imagine this is quite a laborious task if you have 50 different profiles.
The reason for this is to show the qty, steel grade and part number to the suppliers. My question is, any code that will take the lines of the parts list that are not relevant to the selected view and turn the visibility of those lines off?
In AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.
So the drawing gets clear.
How can this be done in Inventor?
With the lines connected to the border?
Since changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
View 5 Replies View RelatedI have an assembly with several parts where I use a pattern to duplicate the parts in the height. I cannot use the pattern sideways due to different center distances between the parts. I could get this distance by using several patterns, but I rather not if there is another way.
I have made a code for suppressing the parts in element 2 if the same part is suppressed in element 1.
IfComponent.IsActive("FB-07 midtstykke-001:1")=False ThenComponent.IsActive("FB-07 midtstykke-001:2")=FalseElseComponent.IsActive("FB-07 midtstykke-001:2")=TrueEndIf
which works fine, however, I only want the rule to run if two criteria are true. I`ve tried the following:
If Component.IsActive("FB-02 midtstykke-001:1") = False And No = 2 Then
component.IsActive("FB-07 midtstykke-001:2") = False
Else
Componen.....
End if
But this rule runs even if No = 3, which it shouldn't.