AutoCAD Inventor :: Unable To Use Pattern Sideways Due To Different Center Distances Between Parts
Feb 6, 2013
I have an assembly with several parts where I use a pattern to duplicate the parts in the height. I cannot use the pattern sideways due to different center distances between the parts. I could get this distance by using several patterns, but I rather not if there is another way.
I have made a code for suppressing the parts in element 2 if the same part is suppressed in element 1.
IfComponent.IsActive("FB-07 midtstykke-001:1")=False ThenComponent.IsActive("FB-07 midtstykke-001:2")=FalseElseComponent.IsActive("FB-07 midtstykke-001:2")=TrueEndIf
which works fine, however, I only want the rule to run if two criteria are true. I`ve tried the following:
If Component.IsActive("FB-02 midtstykke-001:1") = False And No = 2 Then
component.IsActive("FB-07 midtstykke-001:2") = False
Else
Componen.....
End if
But this rule runs even if No = 3, which it shouldn't.
View 5 Replies
ADVERTISEMENT
Aug 21, 2012
I have some parts published in the Content Center. I need to modify a dimension on some parts. I can edit the family table and modify it. The new dimensions are right. But if I open an assembly which use older versions of the modified parts, when I try to update the Content Center parts, Inventor says all standard parts are up to date. When I insert the modified from the CC, I obtain the old version.
I don't have local versions of the part.
If I insert the part with option "Update standard parts when insert", I have the old version too.
I have already made these modification on other parts with no problem, what is wrong with this part ?
I use Inventor 2010 SP4.
View 7 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 9, 2012
I am just starting to make assembly parts from the content center and have found that for the most it is useful. Unfortunately I have found that when these parts are placed in the assembly and a drawing is make of the assembly the bill of material lists total inches of a structural member rather than quantity of piece parts in the quantity column. Thus a 10" tube shows a QTY. of 100 in. rather than 10 piece parts. I have removed the check to export B_L in the function menu but that does not solve my problem. Is there a way to get this to read quantity of piece parts and not total length of material used?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 1 Replies
View Related
May 30, 2012
So, I have an assembly with a sheet metal part and a lot of pressed studs, spacers, weld nuts. I'd like to do a flat pattern with these parts in it in order to give their positions to manufacture, because they have to be pressed and weld in flat pattern phase, before bending.
Is there any easy way to do this (instead of saving flat pattern as SAT and insert every components again)?
View 3 Replies
View Related
Sep 22, 2013
I have created assembly (lets call it main assembly) in which there are 4 other assemblies (lets call them sub assemblies).
Now in the main assembly document i want to display center of gravity of each of the sub assembly.
When i open each of the sub assemblies and turn on center of gravity of each of them, when returning to main assembly view it displays center of gravity of main assembly, not of each of the sub assemblies.
Im asking for this because i want to create a drawing of main assembly and add dimensions of each of the sub assembly centers of gravity and unfortunatly just as in assembly view, when i want to display center of gravity i can do it only for the main assembly not for each of sub assemblies.
View 1 Replies
View Related
Oct 21, 2011
I am currently trying to show a comparison of Center of Gravity between two assembly's. One is the original state and the other has counter weight bars. I know how to get the COG to show on my drawings, but both COG locations are the same in my drawings (but different in my assembly) My problem is when I create View Representations and I toggle the Counter Weight bars off, the COG in my drawing still remains in the same location as if they were still on. I know the hard way of accomplishing my task would be to save 2 seperate models (one with Counter Weights and one without). But I would like to take full advantage of the Representation Option. Using IV 2012 Pro.
View 4 Replies
View Related
Aug 31, 2010
I'm having problem placing fittings in my piping runs from parts that I have created. When I try to place them in I come up with an error "Place Fitting can only be used on authored parts." Now as I have said I am new to inventor so I have no clue what this means. I know there is a content center that has parts used for piping runs which I have been using but it doesn't have all the parts I need so I have been making them.
View 9 Replies
View Related
Dec 18, 2013
I am having a problem with the display of a custom content center part in an IDW. The cc part has been added to a weldment assembly and has 2 preparation holes drilled into it within the assembly. These holes display fine when showing the whole weldment assembly in the IDW but when I add the cc part on it's own it does not show the drilled holes. I understand this is perhaps because the cc part had to be prepared with the holes and these preparations have not carried over on the IDW, is there a way to display preparations in this way for single cc parts ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
Aug 14, 2012
I'm working on some plumbing in an assembly and in the past I've inserted all the fittings and pipe into a main assembly. Then created a sub-assembly and moved all those parts into that assembly. However I cannot drag and drop the pipe fittings around in the browser window. So I'm unable to move them to a sub-assembly.
I last remember moving content center parts between assemblies in Inventor 2012 and I'm currently running 2013.
View 6 Replies
View Related
Nov 20, 2012
[URL]
You're code is definitley a great starting point, and will most likely save me a ton of time!
I am currently diving into a small project which should save a lot of time for designers in the end if it pans out.
Issue being resolved:
We use the Vault and have a ton of machines that get re-used from time to time through the Copy Design method. There's obviously some changes that are made from job to job, but the big issue is changing a machine from an Imperial to Metric one. This is the time (and mind) consuming process I'm looking to shorten.
What I have:
Currently I have a code (few tweaks needed but it works) that is run from an upper assembly. This code then cycles through each and every sub assembly and part that exists within it. As it cycles through, it checks for hole features which are tapped, and if it finds one of these instances, changes the thread from Imperial to Metric according to a Hard Coded set of values.
Current Dilema:
What's the point of changing the holes if the designer has to go through the assembly to change the bolts and fasteners anyways?
I've practiced a bit with your code and been able to replace items, the issue is everything must be hard coded in order to do so. My question is:
Is there a way to get the Family from the Part Occurence / Document / Anything related?
I've looked through the API, but have only found that everything related to the Content Center.... is only accessable through the Content Center, and nothing else.
For Example, yes I am able to tell if a part has come from the content center (ie. PartComponentDefinition.IsContentMember), but that's as far as it goes, just a simple Boolean.
There MUST be a way to find out some sort of Content Center information from the direct Part / other related documents. I've looked at the "Replace Content Center Part Sample" provided in the API, but this example hard codes the ContentTreeViewPath as well.
In the end, I don't quite understand the point of hard coding this path with no way to access it through the Part Document. This only creates the need for constant manual change and / or MANY rules to compensate each and every family.
View 2 Replies
View Related
Jul 21, 2013
How do you copy content center referanced parts to the model? I would like to render my model in Showcase but the nuts and bolts are missing because they are referenced parts.
View 9 Replies
View Related
Aug 29, 2012
I am trying to add color to my content center parts. For example I want all M10 hex head bolts to be red and all M12 hex heads to be blue.
I have My library configured in content center and I take from the "Inventor ANSI" catalog the "Heavy Hex Bolt -Metric" and right click and copy to my library. I switch the sort back to merged view and right click on the "Heavy Hex Bolt - Metric" and select family table. I scroll to the end of the table and insert a new column and set the "Column Name" To "Color" and set the "Column Caption" to "Color" , "Map to Inventor Property:" is set to "Member.Color"
Now going back to the family table I have to enter simple color names like, Red, Green, or Black, I cannot enter names like Water Bubbles, Particle Board, or any of the Inventor Apperance names. If you do you will recive an error on placing the part stating " Unable to create componet"
Futhermore when you click on the Material Column you get a drop down of all the different materials.
Why do I not get a similiar drop down for the colors/apperances?
What is the list of working colors names?
View 2 Replies
View Related
Dec 4, 2007
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
Inv 2008 sp1
View 9 Replies
View Related
Oct 3, 2013
I made a flanged connection using I logic. Very simple Tube + Flange + Gasket + Blind flange + Bolting.Then I tried to write some ilogic rule to have Blind flange on / off when needed, hence the Gasket & Bolting also need to be off. Like in these images:
That works fine visually, but I also want the BOM to be set accordingly. For the Blind flange & Gasket my BOM is OK. But for my bolting the BOM is not OK. I tried to set the BOM structure the same way as the visibility but that failed. It only subtracted 1 bolt from my list (see code)
If Blindflange_status = 0 Then 'Bolting offComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kReferenceBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = FalseElse 'Bolting onComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kDefaultBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = TrueEnd If
Is there a way to set all parts within a pattern BOM structure? I made my bolting by adding 1 bolt, 1 washer & 1 nut and then pattern them using feature pattern select.
Inventor 2013
View 1 Replies
View Related
Oct 3, 2013
I made a flanged connection using I logic. Very simple Tube + Flange + Gasket + Blind flange + Bolting.
Then I tried to write some ilogic rule to have Blind flange on / off when needed, hence the Gasket & Bolting also need to be off. Like in these images:
That works fine visually, but I also want the BOM to be set accordingly. For the Blind flange & Gasket my BOM is OK. But for my bolting the BOM is not OK.
I tried to set the BOM structure the same way as the visibility but that failed. It only subtracted 1 bolt from my list (see code)
If Blindflange_status = 0 Then 'Bolting offComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kReferenceBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = FalseElse 'Bolting onComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kDefaultBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = TrueEnd If
Is there a way to set all parts within a pattern BOM structure?
I made my bolting by adding 1 bolt, 1 washer & 1 nut and then pattern them using feature pattern select. Inventor 2013
View 9 Replies
View Related
Jan 17, 2013
This would be for standard, not custom cc parts. I read that you can save a cc part file as a template with the G_L parameter set as fractions, and then use it to replace the family template in cc, but that doesn't work (or I'm doing it wrong). It worked once, then stopped? I know there has to be a way of doing this.
I tried exporting values from cc as custom iProps, then tried to populate description iProp with these, but that doesn't work.
View 9 Replies
View Related
Jan 22, 2013
A thing I bump in to everytime is that Content Center parts do not standard section in Assemblies and Drawings.
In the Drawings I can menage this by selecting the parts in browser or drawing views and get them sectioned or not.
In Assemblies there is the option to select "Participate in Assembly and Drawing sections" in the Document Settings.
Unfortunately this doesn't work on Content Center parts. Why not?
After searching the site, I noticed the "solution" to check the "Section All Parts" option in the Application options.
This solution is a work around. It only solves the issue when you want to section all parts.
But what if I want to section a few parts and not all?
For example, I do want to section my beams, pipes, tubes etc., but do not want to section my bolts, nuts, washers etc.
I thought that was wat the "Participate in Assembly and Drawing sections" option was for.
Currently working with Inventor 2012
View 7 Replies
View Related
Jun 5, 2013
As you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
12GB RAM and Xeon Quad Core
View 7 Replies
View Related
Aug 15, 2012
For some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.
View 2 Replies
View Related
Dec 16, 2011
I have authored a part to the Content Center, but the part is inserted at a standardized length. How do I author the part so that the length can be specified whem inserted, like the structural steel shapes?
View 3 Replies
View Related
Jan 4, 2012
if I place from content centre > structural shapes > AS1163-1991 rectangle hollow sections - not all sections are there. For example I would like to use a 65x65x6 SHS section. The content centre only goes up to 65x65x3 SHS.
View 1 Replies
View Related
Apr 10, 2012
Just as it sounds, my client wants to be able to set the layers up in a drawing file so that all CC parts come in on a specific layer on the drawing.
I'm looking at the layers and the Object Defaults menus in Style Editor but not finding a way to accomplish this.
View 2 Replies
View Related
Sep 25, 2013
I recently did a pack and go on a top level assembly. Kept folder hierarchy. Included linked files. Included referenced files. All OK so far.
Then opened the assembly in the “Pack and go” folder I created to put it, and it cannot find all the content center parts, such as the ASME eccentric reducer and M24 bolt – see attached i.e. I had to resolve the links. I know they came over with the pack and go as they are in the “Libraries” folder.
Inventor Professional 2014.
Windows 7 64 bit.
View 1 Replies
View Related
Sep 19, 2011
I have been using Inventor 2011 and I have noticed that I can’t create a component *.IAM in place if there is a content center part that is selected. I am saving content center parts as custom.
View 8 Replies
View Related
Oct 7, 2011
We are using Tube and Pipe with custom valves, flanges etc published to and taken from Content Center. Quite frequently we have to mock up a vendor supplied valve until we get the final model from them (usually near the end of the project) the mocked up valves can change in design over the course of the project, which means submitting and re-submitting different versions of valve with a slightly different name each time.
To try and keep things tidy (and prevent confusion with other users) I've tried to delete existing families and replace again with the same name, but Inventor T&P/CC won't allow this, and usually get the error message about family name already existing.
How can I truly delete the family and have no trace left on CC/Vault/working folders etc? Is there a workflow I should be aware of for such a task?
Inventor Routed Systems 2011
Win 7 x64
Product Design Suite Ultimate 2013
Win7 x64
Dell Precision T7400
Xeon X5460 @ 3.16GHz
8GB RAM
Quadro FX 1700 512MB
View 6 Replies
View Related
Sep 5, 2012
I have a part that we will cut out on a CNC plasma machine that will undergo a drilling operation. We create all the parts that will be cut on the plasma in the sheet metal environment because of the simple flat pattern export. Our plasma machine has the ability to scribe lines and also create center punch marks. It distinguishes between cut lines, scribe lines, and center punch marks by layer name. I need a way to get the center points of the drill locations into their own layer.
View 9 Replies
View Related
Feb 28, 2013
It is all about making a spiral shaped pattern of parts around an axle.
what I found in a topic is:
1.Make pattern of workpoints in part file.
2.Make pattern of components in assembly file to follow part pattern.
1st part is easy and done with coil and pattern within the ipt
2nd part does not let me select the workpoints as feature pattern.
View 7 Replies
View Related
Dec 27, 2013
In the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
View 5 Replies
View Related
Mar 13, 2013
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
View 8 Replies
View Related
Mar 14, 2012
I have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
View 3 Replies
View Related
