Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
View 2 Replies
I am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
I'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
View 2 Replies View RelatedI'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I am trying to make an assembly with certain parts visibility turned off. How is the best way to do that?
Is that a Level of Detail? Is there anything I should watch out for or a best practices on how to do that?
if i have a load of parts in an assembly set so visibility is of, is there a way to group select all hidden parts so they van be made visible again as a group rather than looking through the assembly for them?
View 9 Replies View RelatedI'm building a platform and have sheet metal on top of a tube frame. When I'm zoomed up closely I only see the sheet metal surface. But when I zoom out further some of the tubes start becoming visible through the sheet metal. This happens in just about every assembly. Parts behind other parts start becoming visible when zooming out far enough.
Is there a way to stop this from happening?
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
What I'm looking to do is show the hidden lines blocked by a part in a plan view but not all of the hidden lines. Ie. I have a top view showing a clearance. If I turn on that clearance a portion of the original part is not viewed. When I turn on hidden lines I now see every hidden detail of that part (I didn't turn on hidden lines for the entire drawing). I then have to eliminate all the lines I don't want which is both tedious and cumbersome. Is there a way to turn on just the lines hidden by a particular object but not all the hidden lines of the part.
View 1 Replies View RelatedI want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
Is it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
Is there a way to get a list of constraints that exist between two parts in an assembly?
It will take forever to go through each and every constraint for one of the parts, checking the "Other Half" of each just to find all constraints between to specific parts.
I have a question about getting CoG of my assembly. The only problem is that i only need 2 parts (the rest are just dummy solids with 'default material'.
When i control select two parts, right click and go 'iproperties' - the physical tab doesn't let me determine CoG of the two parts combined.
I want the user to have a set of occurrences selected and click a button to run code on them but I can't seem to find a method of getting the names or anything else on the actively selected parts.
View 1 Replies View RelatedI have now been able to select items in an assembly and get weight and COG details of just the selected items, however I guess the COG will be working from the world datum as the xyz data is very wrong?
how do i set the world datum to a known point on one of the parts in the current view so that I can get the COG to relate to a position within the part that I set the datum to?
basically I have a block of metal with a load of parts on one end that offsets the weight / COG and i need to balance this on some brackets that are equally spaced from the COG, so i need to determine where the COG is of all the selected parts but as a position within the block from a known point.
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies View RelatedCan we show or hide the model edges with respect to Features or parts. I think, there must be only two options. ie. "Show all hidden edges" or "show all" and "Hide all edges".
View 3 Replies View RelatedAt the begenning I was thinking that it was just to RMB and select show hidden edged in my drawing but in fact not.
The model look like this :
And in the drawing I have some missing lines :
I tried to display the missing part in a separate drawing and it's OK.
I use Inventor 2011.
Is it possible to define a View Representation in an assembly such that a half section view is active, but only for a certain set of parts within the assembly?
View 5 Replies View RelatedIs there a way using ilogic,that when you select/highlight a part within an assembly and run the code that it will turn on the Origin planes only and also turn turn them off ?
View 5 Replies View RelatedI want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.
Dim doc = ThisApplication.ActiveDocument
Dim entity = ThisApplication.CommandManager.Pick(
SelectionFilterEnum.kDrawingViewFilter,
"SÉLECTIONNE UNE VUE")
modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName)
PART = Left(modelName, 11)
EXT = Right(modelName, 3)
FIRST = Left(modelName, 3)
[code]....
I have the rule "SEND TO PARTS" in my assembly but i have this error message
MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I've just started using Inventor and am getting the hang of things, but one thing that really annoys me is these lines that are all over the parts I use in assembly. Screenshot attached.
View 5 Replies View RelatedI have a block which contains dimensions and am wondering if it's possible for the dimensions to be hidden if the block is not selected? They are on a separate layer so I can hide them in the layer manager but it would be slick for them to autohide unless I select the block.
View 2 Replies View RelatedAttached shows lines (Parts) are intersecting each other in drafting mode. I have tried all but I am not able to resolve this issue.
View 1 Replies View RelatedAt my company when producing drawings for manufacture we require a sheet for any steel profiles to be cut!..We do this by selecting the assembly from base view,hitting model view tab, selecting presentation and choosing the relevant profile from the drop down!
Once the profile is placed, we highlight the view and hit the parts list tab which obviously creates a parts list, but for the whole assembly, we then have to edit the parts list by turning off the visibility of the lines of all the parts which are not relevant!!...as you can imagine this is quite a laborious task if you have 50 different profiles.
The reason for this is to show the qty, steel grade and part number to the suppliers. My question is, any code that will take the lines of the parts list that are not relevant to the selected view and turn the visibility of those lines off?
