Is there a way to use PRESSPULL on a face that's behind or underneath another face. When I use PRESSPULL it always selects the face on top and sometimes I want a face that is behind or underneath that face.
View 3 Replieshow to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
when I anchor the layer face over the background face the floating selection disappears which means I cannot work on the layer face and therfore am unable to erase the layer face into the background face,this is on gimp 2.6
View 4 Replies View Relatedhow to put someones face onto another persons face.
View 3 Replies View Relatedcreat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedI simply would like to show the normal vector of a 3d face, is it possible?
I didn't find any command apparently, neither on the help menu...
When I am working with 3D models, autocad keeps changing my ucs by a face I am near. I want to work in the current ucs and not change. How to change this setting?
View 3 Replies View RelatedHow to create a view that lines up perfectly with a face of my 3D object.
View 2 Replies View RelatedI have a series of Autocad Objects (3D faces). I need to turn the contiguous group of them into a SINGLE Autocad surface. I know next to nothing about vanilla autocad and 3D stuff. Seems there must be a way to make a surface out of objects. I would then use this resulting surface to carve a solid. DWG with 3D faces in it attached.
View 2 Replies View Related2013 makes some face flipping on body objects and crashes immediately after rendering. Same scene renders fine with 2012, without crash...
View 2 Replies View Relatedi have two pictures. i want to take the face of one picture and put it on the face of the 2nd picture
View 1 Replies View RelatedI am using AutoCAD 2013. During the creation of 3D while I am using Presspull Command, it works fine in the beginning after some time, AutoCAD seems to be hang while I took the command but once I press Esc, AutoCAD continue working.
View 2 Replies View RelatedI have created a model, by lofting a shape along a curved spline path. The model properties is currently '3d Solid' what I want to do is generate a 3d Face off of this model.
I have exploded the 3d model and that gives me a surface, bu the dilemma is that I do not know how to 'trace' or turn this surface into a 3d face format. What I was thinking is that if the surface could be exploded into individual elements I would be able to draw over the surface with the 3d face tools and then have my model, but a issue with this is that I cant explode the surface into elementary elements AND the 3dface tool cant generate curves.
In short how to turn a 3D model into a 3D Face or a Surface into a 3d Face?
The program I am exporting the model into accepts the following:
DXF Entity SAP2000 Objects
1 POINT Point
2 LINE Frame/NLink
3 3DFACE Area
4 3DPOLYLINE Solid
5 CIRCLE Line(s)
6 ARC Line(s)
Note: To be able to import the dxf entities as solids in SAP2000, you must draw them in AutoCAD as meshed polygons or meshed solids. I could also export the model as a solid but again do not know how to get a meshed polygon or meshed solid from my 3d solid, when I do mesh smooth, the model basically turns into a rectangle and looses its detail.
As you can see it is number 3 I am working on. I have managed to create simple 3d faces and get them into the program but the 3dface tool is very primitive and I cant see how I would create the curves that my model has, I cant seem to form a grid system either to use the 3dface - everything seems to draw in space.
In Inventor 2013 when i export face as it is automaticly exported to DWG 2013 version. How to i set it to 2010 version export without having to do it everytime manually? (option then chooose 2010)
View 2 Replies View RelatedI need to split a landscape in to 2 parts, it is made of 3d faces?how to do it?
View 1 Replies View RelatedI have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedUsing autocad 2008
There is a cube.
Solidedit --> Face --> Extrude
I place the pickbox on the front side of the cube, press down Ctrl which highlights the front face, then while still pressing down Ctrl, I press space bar to make the highlight jump to the back face. But when I click it with the mouse, the front face gets selected!
How we can convert a 3d face drawing as in attached drawing or can be using autolisp routine.
View 5 Replies View RelatedI am trying to CAD a model rocket I just made so I can test the aerodynamics of it. I have all of the individual parts made in inventor, but I am having trouble getting the fins on the rocket.
How can I constrain the fins (which have a flat face) to the outside of the cylindrical rocket tube? The photo shows the fin and the face (the narrow and long face) that I am trying to constrain to the tube.
I am trying to put a 1 degree draft on the face shaded in yellow in the direction I have shown....not sure how to accomplish this?
View 4 Replies View RelatedI can add sketch on a part's workplane (xy, xz, yz) by using sketchs.add.is there anyway i can select a face of part and create a new sketch?
View 6 Replies View RelatedI'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
I have a script which saves the flat pattern from a sheet metal part as a dxf file. But we also have standard part files that we save a face as a flat pattern. So I'm looking to be able to select a face then run a script to save the selected face as a flat pattern in a dxf file.
View 1 Replies View RelatedIn doing a move face I noticed there isn't any parameters that can be edited after the move face has been created. I want to control the face length with a parameter after it has been created. Am I missing something or is there a work-a-round?
View 2 Replies View RelatedI need to find a way to export the selected face to dwg and to have the Part Number and if possible the description written under the exported face. I don't know if it's possible to do this. I know it's possible to export programmatically the selected face, but is it possible to get the name + description into the drawing too?
We're just looking for a way to "automate" the creation of our laser drawings.
Having never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View RelatedI received a 3D drawing but only need linework from it. I have flattened it out so I am able to export the linework. The problem is when I import the drawing into another software (Trimble Business Center), the lines are still 3D face and am not able to treat it like linework. Is there a way to convert a 3D face into line or polyline in C3D?
View 6 Replies View RelatedTrying to add draft to an area on this part. Not sure exactly how to get the results I'm looking for. Tried "Draft" command and that didnt work at all. Tried to do a sweep. Its close, but not exacly what I want.
I am trying to get draft applied on this entire face at a given angle (say 5°). The Sweep feature in the part is where I attempted it, but you can see below the Ø6in section, all of the face does not have the draft on it.
I have a face plate with strokes on it to represent pressure increments.I cannot get the numbers onto the face plate.On the large stroke it starts at 0 and goes to 9 .. How do i add the numbers. Also i used extrusions for the increment strokes with circular patterns and mirror features.Is this how it should be modeled?
2013 EDU