AutoCAD 2013 :: Show Normal Of 3D Face
Nov 12, 2012I simply would like to show the normal vector of a 3d face, is it possible?
I didn't find any command apparently, neither on the help menu...
ADVERTISEMENT
AutoCAD 2013 :: Edit Solid With Opening A Hole Only One Face And Deleting Another Face
Oct 2, 2013how to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
Maya Modeling :: Display Normal For Selected Face?
Jun 5, 2011I know that we can select a model to show all of it's normals but is there a way to just show the normal from selected faces ?
View 5 Replies View RelatedAutoCAD 2013 :: Using PRESSPULL On Face That's Under Or Behind Another Face
Dec 20, 2013Is there a way to use PRESSPULL on a face that's behind or underneath another face. When I use PRESSPULL it always selects the face on top and sometimes I want a face that is behind or underneath that face.
View 3 Replies View RelatedAutoCAD Inventor :: Show Draft On Face
Sep 5, 2012Trying to add draft to an area on this part. Not sure exactly how to get the results I'm looking for. Tried "Draft" command and that didnt work at all. Tried to do a sweep. Its close, but not exacly what I want.
I am trying to get draft applied on this entire face at a given angle (say 5°). The Sweep feature in the part is where I attempted it, but you can see below the Ø6in section, all of the face does not have the draft on it.
AutoCAD Visual LISP / AutoLISP :: Show (read / Assign Variables) To Normal Or Custom Properties In Object?
Apr 9, 2012Looking for Lisp command to show (read/assign variables) to normal or custom properties in an object?
View 7 Replies View RelatedAutoCAD 2013 :: How To Turn Off UCS Auto Face Selection
Apr 25, 2012When I am working with 3D models, autocad keeps changing my ucs by a face I am near. I want to work in the current ucs and not change. How to change this setting?
View 3 Replies View RelatedAutoCAD 2013 :: Creating View Aligned With Face
Apr 4, 2013How to create a view that lines up perfectly with a face of my 3D object.
View 2 Replies View RelatedAutoCAD 2013 :: Convert 3D Face Objects To Single Surface
Jul 26, 2012I have a series of Autocad Objects (3D faces). I need to turn the contiguous group of them into a SINGLE Autocad surface. I know next to nothing about vanilla autocad and 3D stuff. Seems there must be a way to make a surface out of objects. I would then use this resulting surface to carve a solid. DWG with 3D faces in it attached.
View 2 Replies View RelatedAutoCAD Inventor :: Option To Merge Bottom Face Of Pad Eye And Pipe Curved Face
Oct 15, 2012There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
AutoCAD Inventor :: Merging Circular Face To Flat Face
Aug 22, 2012All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
Maya :: Bonus Tools 2013 Menu Doesn't Show In 2013?
Sep 4, 2012BonusTools 2013 menu doesn't show in maya 2013,how can show it.
View 3 Replies View Related3ds Max :: 2013 Vs 2012 - Face Flipping With Body Objects?
Apr 13, 20122013 makes some face flipping on body objects and crashes immediately after rendering. Same scene renders fine with 2012, without crash...
View 2 Replies View RelatedAutoCAD 2013 :: Dim Text Does Not Show?
Apr 15, 2013Customer has sent me a drawing. When I view it, the dim text is not shown, but when I 2x click on the dim, it shows up in the edit window. How do I make the text show so I can print this?
[URL]
AutoCAD 2013 :: Blocks Will Not Show Up In Drawing
Oct 11, 2013I am trying to copy and paste a bar scale from one drawing into another at 0,0…. But it won’t show-up, as you can see from the attached there are 17 blocks in this drawing but none of them will show-up, I have even tried to re-insert the block but still no joy….. I have re-started AutoCAD, even the computer but still nothing…….
View 3 Replies View RelatedAutoCAD 2013 :: Text Won't Show In Xrefs
Jun 21, 2012if I put objects and text in the same layer, and then go to another .dwg file and then xref that file, the objects show but the text won't.
I've tried different layers and non and anotative text, but I can't get the text to show.
2013 Civil 3D
AutoCAD 2013 :: Attributes Won't Show In XREF
Feb 5, 2013I have an drawing that is loaded with attributed blocks. Nothing but text. When I XREF this into another drawing, none of the text shows. Layers are on, nothing is set to invisible.
I think this drawing is from an older version of AutoCAD, would that be the problem?
AutoCAD 2013 :: Quick Properties Don't Show?
Apr 22, 2013I use windows 8 x64 and I've installed AutoCAD 2014, but error appeared Quick properties only don't show anything, only White color
View 9 Replies View RelatedAutoCAD LT :: Why Layers In LT 2005 Will Not Show In LT 2013
May 6, 2013Drawing created in AutoCAD LT 2005 - in AutoCAD LT 2013, several layers are not present. Tuned off all filtering, etc. Noted that some blocks will not appear in layouts even though the layer they are on is not frozen in the layout.
Not clear why layers in LT 2005 will not show in LT 2013 I attached offending file.I am self-taught and LT 2013 is a little daunting for me.
Forgot to mention that layer AX-COL-SYMB-2 does not show up in LT 2013. Also, block for column line symbols (circle/column numbers) will not show in layouts in LT 2013, but will in LT 2005.
AutoCAD 2013 :: Linetypes Show Up In Different Scales In The Same Drawing
Oct 20, 2013I am trying to understand how Linetype scale works, and have been researching on LTSCALE, MSLTSCLAE and PSLTSCLAE. I believe I have a fair understanding of each of these settings. Still, I can't figure out how the scaling works while I was trying to create custom line type. To illustrate, I created a new linetype called XCENTER, which is exactly the same line type as CENTER except its name, in a new LIN file.
*XCENTER,XCenter ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
After loading the new linetype into my drawing, I was surprised to see that CENTER and XCenter show up in different scales in the same drawing (see png).
My work file is WORK.DWG, I have purged everything except the two polylines, one with the line type of CENTER, the other xCENTER. Not that my global scale is 1:100, LTSCLAE=, MSLTSCALE=1, the object scales are both set to 1.0.
I copied the two lines to clipboard and pasted on a brand new drawing TEST.DWG, and the two lines show up in the same scale.
What in my original drawing WORK.DWG is causing this problem?
AutoCAD 2013 :: Aerial Photos Won't Show In Printout?
Dec 4, 2012I have inserted aerial photos into a drawing. When I go to layout view and print preview either to my plotter or my pdf writer I can see the aerial image just fine within the viewport. But once it actually makes a pdf or prints it to the plotter the aerial photos are not there, just the polylines and objects within the drawing.
View 3 Replies View RelatedAutoCAD 2013 :: Using MVSETUP - Unknown Command Show Up
Feb 14, 2013I have AutoDesk 2013 install on my computer and when I use MVSETUP, "Unknown Command" show up.
View 6 Replies View RelatedAutoCAD 2013 :: Printing PDF - Titleblock And Some Hatches Don't Show Up
Jan 10, 2013Whenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.
View 2 Replies View RelatedAutoCAD Civil 3D :: Menus And Toolbars Won't Show In 2013?
Sep 24, 2012I finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
AutoCAD Inventor :: SLDASM-file Won't Show In 2013 Pro
Oct 25, 2012I'm having some trouble with importing SLDASM-file in Inventor 2013.
Inventor 2013 Pro tells me, that I could import PRT, SLDPRT, ASM, SLDASM-files.
But it doesn't appear in my project when I'm importing it.
[URL]
Verstelbare loodslab universeel 1 pans.SLDASM
AutoCAD 2013 :: Title Block Does Not Show Up When Plotting
Oct 25, 2012I made a 24 x 36 title block with attributes and saved it as a wblock.
1) When I inserted the title block into a 24 x 36 paper space, The titleblock does not fit. and the texts are messed up as well. The text are in in their respective places. What I did to create the title block is to basically created a title block border and then created the text. So, I made a block out of the borders and then a block out of the text then I made a block out of the whole thing (text and border). After i saved it as a wblock. When saving as wblock i chose entire drawing and once i chose object.
2) When I try to test plotting with this title block i made (even though it does not fit in) it does not show up in print preview.
How do I make some of the text Bold and others not? but keep them all same style?
AutoCAD 2013 :: Show Current Volume In A Field?
Dec 21, 2013I want to do something a little different in my math class unit on volume - I want to bring up AutoCAD 2014, and have a 3D solid on the screen. As I change/edit the object, I want the students to see the volume amount change, onscreen. Is there a way I can put in a field, preferably, that with a quick regen will show the volume of a 3D object?
View 3 Replies View RelatedAutoCAD 2013 :: When Zooming Different Blocks Show And Disappear?
Sep 27, 2012While creating a drawing inserting 3d blocks after closing and reopening the file blocks have disappeared from veiw. When i mouse over the block it shows but goes as soon as i move the mouse. also when zooming different blocks show and disappear?
View 3 Replies View RelatedAutoCad :: Can 2013 Show Area In Acreage In Properties Box
Feb 28, 2013I'm looking at several surveys and using plines to quickly map it out and divide. But then to find the area in acres, I'm using a seperate calculator to convert the area given in the properties box.
I've searched and found that there was lisp used before acad 2011. and was hoping that there maybe a way for acad to do it now.
Can I just change the units from sq ft to acres in that field on the properties box in acad 2013?
AutoCAD 2013 :: Doesn't Show Snowflake In Menu
May 17, 2012Acad 2013 recent install. When using the layer menu, sometimes it will update to show item frozen, but doesn't show the snowflake in the menu. Then you can't thaw it as it thinks it is already sunny. Also intermitent problems moving items from layer to layer. Says it changed them, but when listed are still in the original layer. Just this afternoon it deleted the layer, kept the item being changed with no layer association, then gave me an error message. Luckily I had saved recently. The menu has also relocated itself to covering up the menus at the top of the screen and has lost the pictures of new layer, set to current layer etc. I will probably end up reloading software. I am also having problems with dimensions not using the settings color, size etc that are set, but rather defaulting to the autocad default (yellow) etc, which don't print well for us.
View 1 Replies View RelatedGIMP :: Unable To Erase Layer Face Into Background Face?
Jul 14, 2011when I anchor the layer face over the background face the floating selection disappears which means I cannot work on the layer face and therfore am unable to erase the layer face into the background face,this is on gimp 2.6
View 4 Replies View Related
