AutoCAD 2013 :: Linetypes Show Up In Different Scales In The Same Drawing
Oct 20, 2013
I am trying to understand how Linetype scale works, and have been researching on LTSCALE, MSLTSCLAE and PSLTSCLAE. I believe I have a fair understanding of each of these settings. Still, I can't figure out how the scaling works while I was trying to create custom line type. To illustrate, I created a new linetype called XCENTER, which is exactly the same line type as CENTER except its name, in a new LIN file.
After loading the new linetype into my drawing, I was surprised to see that CENTER and XCenter show up in different scales in the same drawing (see png).
My work file is WORK.DWG, I have purged everything except the two polylines, one with the line type of CENTER, the other xCENTER. Not that my global scale is 1:100, LTSCLAE=, MSLTSCALE=1, the object scales are both set to 1.0.
I copied the two lines to clipboard and pasted on a brand new drawing TEST.DWG, and the two lines show up in the same scale.
What in my original drawing WORK.DWG is causing this problem?
I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
Is there anyway of plotting a cad drawing from the model view screen so that certain linescales show? At the moment when I plot it will show hatched items without the outlines.
I'm having a small problem with linetypes that are not being used nor will they purge from a drawing. I believe that all started with the binding of an xref but now the xref has been removed along with just about everything else other than simple geometry and some text. The linetypes will not purge. For instance, if I take a standard "new" dwt file that has no problems and copy anything from an "infected" drawing to the dwt, the infectious linetypes will now appear in the dwt. And when I say anything, I mean anything. i can draw a new circle/line/point on the "0" layer and copy that new item into the clean dwt and it will take along with it the unwanted linetypes.
I have seen a similar post about linetypes not purging. And have tried the wblock solution with now luck. I have tried recover along with anything else that I could think of. Again the drawing doesn't have any xrefs and even newly drawn items, when copied, will become infected by the unwanted line types.
Also, the linetypes that are being left behind do have the "$0$" within the name. But also to mention the only ones being left behind are "powerline" and "phantom",
I am trying to copy and paste a bar scale from one drawing into another at 0,0…. But it won’t show-up, as you can see from the attached there are 17 blocks in this drawing but none of them will show-up, I have even tried to re-insert the block but still no joy….. I have re-started AutoCAD, even the computer but still nothing…….
I've been using AutoCAD for a while now, started with 2011 and now I'm using 2012. However, the one issue I've never been able to resolve is how to get my linetypes to show in model space properly, and then how to get them to show the same way in paperspace.
I know it has something to do with, at least, LTSCALE and PSLTSCALE. I've never know the 'formula' to make those work - it takes a lot of trial and error before they work together. Is there a trick to just making all of this work, without changing scales and regenerating countless times?
The current drawing I'm working with; I'm drawing in 1:1, with my viewports set to 1:100. My LTSCALE is 500, and my PSLTSCALE is set to 0. That seems to make things 'work' but, I can't figure out how to always just make these values work.
I should add I've checked the forums for a 'magic' answer and, there doesn't seem to be one. Is this the way it really is? I thought AutoCAD would be a little more intuitive than just 'trial and error until it works'.
“Scale lineweight” issue. When plotting in the office to A2 Printer I usually check the “Scale lineweight” checkbox. In some drawing “Scalelineweight ” does mess with the lines scales showed in the preview and on the paper. why?
I am a very infrequent user of CAD and still do things like I used to do back in the '90s.
I draw in Model space at full scale--except, and this is why I am posting this question, when I have a small detail I want to be visible.
Can I draw a detail in Model space that is a different scale than the main drawing, or do I have to make it 'larger' by using Paper space and a viewport. Like maybe a block or some procedure I am unaware of.
I want to edit linetypes from a drawing that I got from a surveyor but do not know where Civil 3D stores the linetypes/*.lin files of externally created drawings.
I am having trouble when I import XRef’s and the scaling of lines. When the drawings are importing the hidden lines do not show up as hidden lines. I know this might be a scaling issue but I do not know how to correct this. The XRef drawing is drawn at a scale of 1-1/2”=1’-0” and set to print on a letter size paper but the drawing which it is imported to is set to be printed on a 11x17 but the viewport is still at the 1-1/2” scale and the lines are shown as continuous.
I must be missing something on how Linetypes Work. I created a folder where I store all my shape files for linetypes, and added it as both a support file search path and a working support file search path. I tried to provide as much information as I could with the images below. When I try to bring in a linetype I constantly get a bad definition error. proper way to store and implement Linotype standards.
My hard drive died and I purchased a new hard drive. I run Vista Business and have both PS cs3 and PSE. Both programs show my grayscales as shades of purple. It also prints as shades of purple. But I have other photo editing software and it shows grays correctly and prints correctly. Does anyone have any suggestions? It use to work okay before the new hard drive was installed. None of my other software is acting any differently.
I have just received a drawing, and getting message on excess drawing scales trying to xref it into drawing, how do i change scales, get rid of all different annotation scales how can i purge it?
I incorporated an architects drawing into mine, and brought in hundreds of linetypes and text styles. Whenever I cut and paste from that drawing, the linetypes come too. If I cut and paste within the drawing, I think the linetypes multiply. It's made the drawings almost unworkable.
I can xref the file into a new drawing, and edit the x ref to make it part of the drawing, which gets rid of the linetypes, but adds a prefix to every layer, block, text style etc.
I am working on my company template. We are trying to keep it as close to INDOT standards as we can. Indot uses microstation and provides many files for microstation users. I converted one of the files to a .DWG and impoted all the linetypes to my template. This had a lot of bad side effects.
How to extract the actual code for the Linetypes, so that i can simply re-write a code as autocad wants it and then import?
Using project navigator my drawings get xrefed from the constructs, through the views, and finally to the sheets tab.
I recently realized that I needed to fix / change my linetypes on 5 different drawings starting at the construct. When I had finally finished fixing the layer linetype / line LTscale / drawing LTscale to get it to look exactly the way that I wanted, I had to go through my views drawings, and the sheets drawings, detach the xrefs, re-attach them, and then modify the layers to the colours that I wanted.
Some people had the same problem about 10 years ago in this thread, and the poster at the bottom sums it all up nicely. This is not a VISRETAIN issue. I just want changes to my linetype changes to flow through all xrefs, just as if I had moved a line.
[URL]
I would like to see a setting added to CAD that would allow linetype changes to flow through, and a colour setting that would allow colour changes to flow through. Maybe VISRETAIN is too broad of a command, and needs to be broken down into linetypes, colours, LTScales. etc etc etc.
Drawing size on an A4 at different scales,The A4 can have a drawing size up to 29.7x21 meters when printing with a scale of 1/100 while it can have up to 14.8x105 meters when printing with a scale of 1/500.
Does this mean that we need to have different title blocks each time we print in an A4 paper size with different scale?
I need to show a building plan at 1/100 scale and then just its outline at say, 1/500 for a site plan, both on the same drawings and using just the one model?
I am working in a drawing that had all archetectual scales. I Need to insert scales like 1"=30' and so on. Usually when i go to this menu i can simply add them, but in this drawing they arent there. I started this drawing using the relitivly blank template ACAD.dwt because i am trying to build a company template and did not want any trash.
How does autocad chooses wich scales to show. In drawing setting it is set to US Survey foot.
The link talks about the issue, but i really do not understand the results. [URL] ......
Civil 3D 2013 HP Z400 Workstation 6GB of RAM 296GB HDD ATI FirePro V5700(FireGL) Win 7 Home Professional
I am trying to extract all of the annotative scales in a drawing, I have found some code which will extract the current annotative scale, but not all.
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument Dim db AsDatabase = doc.Database Dim ed AsEditor = doc.Editor Dim ocm AsObjectContextManager = db.ObjectContextManager Dim occ As ObjectContextCollection = ocm.GetContextCollection("ACDB_ANNOTATIONSCALES")
I have a requirement sheet from the city for plans for a little strip mall that I'm drawing a renovation for one unit. Had to reproduce the entire site however for the city planner. No problem, doing that, but here's where it gets kinky. They want the plans submitted on 11 x 17, but scaled at 1"=10'. The site is 656' ±, so at that scale, ain't no way it's gonna fit on an 11 x 17 sheet, right? If one inch = ten feet, on a 17" page, the biggest anything could possibly be is 170 feet, right?
im not too hip with shapefiles/linetypes. but here is my current situation. everything was working fine for the past 2 weeks since our civil2013 install. yesterday i started a new drawing with our template, and now our linetypes are just dashed lines. its not loading the x's for fences, or any of our other custom shapes. i opened an old drawing which was working fine, and it now has the same issue.
the support file path is pointed to a local folder which contains a customised .shx file made by a previous employee here.
I made a SitePlan in AutoCAD with all of the proper line scales set, but when I imported the file into Revit, they were all solid lines, not hidden or phantom styles as they should be. I fully exploded the site plan within Revit, but i still have yet to see a possible way to adjust the line type scales. So far it has only been telling me about how to change the line weight, which is not what I'm trying to do. If there is any information i can begiven on whether it is even possible to adjust the line type scale in Revit from an AutoCAD file
Why is it, when I restore a layer state to a blank drawing, it cannot load the linetypes saved to those layers? I get an error that says Linetypes not loaded and then wind up with a full set of layers all with CONTINUOUS linetype.
If I bring in a block from a toolpalette that has a new linetype and layer, it will create them for me just by inserting the block. Am I missing something??
When plotting with plot styles the "use object linetype" setting in the plot style table is not working when i plot a pdf file. All the lines appear as continuous. I am unable to plot hidden, phantom, ect lines. Changing global scale has no effect.
