I have an drawing that is loaded with attributed blocks. Nothing but text. When I XREF this into another drawing, none of the text shows. Layers are on, nothing is set to invisible.
I think this drawing is from an older version of AutoCAD, would that be the problem?
I was wondering how I can manage to make text attributes show in an xref.
If this is not possible, is there a way to have text on a xref that is locally editable?
We have hundreds of macros for inserting blocks into drawings. Many require the user to input values for attributes. The command line in 2013 does not display the user prompt for entering values. ATTREQ is set to 1. ATTDIA is 0. We don't want to display the dialog box, just the prompt. Here is what a macro looks like...
*^C^C'clayer;LAYERNAME;-insert;BLOCKNAME;!userr1;;\'torient;l;;0;
There are two pauses before text orientation for a user to enter information.How do I get the attribute prompts to appear in the command line? Works fine in 2012!
I would like to know how, if possible to make the attributes of a block show up as text. Example:
I am working on a power utility design where each power pole has a sequential name and may or may not have units that need to be added into a contract. I have my attributes set up where I can go in and assign a required number to a unit so I can export my data into excel. The problem I am having is that I have to enter the text and change the attribute quantities separately. Also, there are 40 or so different units and only a few certain ones required at each pole. Is there a way to set the attribute only to display text if the quantity is greater than zero so my list is not 40 units long at each pole?
(I am using Autocad 2013, 64 bit)
I'm a new at CAD Tutor but have been using autocad since R12 for DOS, I'm currently using AutoCAD 2011 MEP.
I received a file from an architect and the attributes don't burst and when I xref the file in to my drawing they don't show up. When I list the text, it says it is an 'Attribute Definition' but when I try and run attedit, the message says 'No object found'.
I believe the attribute problem is because the original file from the architect was made using Microstation and saved poorly to AutoCAD, but I'm not sure.
Just wondering how I would return attributes of blocks in my drawing's XRefs?
I've come across one example that is in VB but no luck.
I currently have a list in a form that consists of all the XRefs in my drawing and I wish to return all blocks and attributes that are linked to the selected XRef.
I'm using AutoCAD LT 2010 and I'm trying to create attributes for a title block (sheet title, project #, etc.) and I can't get the attribute to show up. I do not have "invisible" checked, and I can't think of what else the problem might be. When I create a block with the attribute inside a box, the box shows up but the text does not.
View 9 Replies View RelatedI've inserted an external reference (as an attachment), but it does not show up in my drawing. I've checked all of the obvious things with regard to layers. I've never seen this before, but I'm sure that I will find that the answer is obvious.
Using release 2009
I am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
View 2 Replies View RelatedI am a little new to assigning attributes. My company had a block with two attributes that I need to alter. When the block is inserted, it asks a quantity. The other attribute is titled location. I am told if needed, all these quantities can be totaled per drawing. It has a title of "location". Two things: How to replicate this action? And is there a way to show all properties of a field for an attribute?
View 2 Replies View Relatedhow do I show the full name (path and all) at the top of the Acad dwg?
View 3 Replies View RelatedFor several releases Autocad's layer manager has shown only XREF layers in the layer manager by default. Open a drawing with Xrefs (nearly every drawing I have ever worked with) and to access the layers that are actually *in* the drawing, I must first open the layer manager, select the "Xref" filter, and check the Invert Filter box. Then I see the layers that would more logically be shown be default.
Does any way to change this so the non-Xref layers show up be default??? I am currently using Autocad Architecture 2012.
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies View RelatedI have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
View 2 Replies View RelatedI use a building key for building reference (inserted as a xref into the individual drawings) in many of my drawings. I have layers for specific areas and rooms. I turn off the layers on the appropriate drawings (if the drawing is for room 301, I make sure all other layers are off and only 301 are on).
My problem come when I add a new layer to the key and since the key in xrefd into many drawings it shows up as always being on.
This makes to have to go back and do a little bit of layer control each time I change the xref.
VISRETAIN=1 only keeps the layers set to last save and everything added to the xrefs are basically taken from the xref (color, visibility, etc). Is there a way to set a variable so that you have to check the new xref layers before they show up on the referenced drawing?
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
some attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
I am looking for a way to increment an attribute so that when i have a block with a number attribute and i make multiple copies of or array it the number changes incrementally.
View 1 Replies View RelatedI have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 Replies View RelatedI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
View 2 Replies View RelatedWhenever I Output a shapefile it shortens the name of my attributes. I am using the Map 3d Export, i selected my objects, then select Data tab and select my block, and click ok. Then when i go to load the shapefiles into the database it has shortend the name of my attributes.
View 6 Replies View RelatedI am having trouble when I import XRef’s and the scaling of lines. When the drawings are importing the hidden lines do not show up as hidden lines. I know this might be a scaling issue but I do not know how to correct this. The XRef drawing is drawn at a scale of 1-1/2”=1’-0” and set to print on a letter size paper but the drawing which it is imported to is set to be printed on a 11x17 but the viewport is still at the 1-1/2” scale and the lines are shown as continuous.
View 6 Replies View RelatedI have a drawing that I cannot detach the Xref. It's not making sense.
When I try to detach the Xref I get a message saying
"Xref xxxxx.dwg has multiple references. Not detached"
I've attached a screenshot of what I'm seeing.
AutoCAD 2013 Windows XP
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer.
In Drawing B the pdf is on 0 layer.
The 0 layer is not frozen and is set to print.
The xref in drawing B is set to overlay and relative (I tried absolute).
I can see the pdf in drawing B.
PDFrame is set to 2 in dwg A and B.
I know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
There is a way to change the text in a tag to include spaces without getting the error that tags cannot be null. I've forgotten how to do this. I can't find this in my AutoCAD manuals, or on-line.
View 1 Replies View RelatedI am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
When I insert Annotative blocks and change the scale drawing (E.g. 1:100 to 1:200), attributes of Annotative blocks move to anywhere. I tried already ANNORESET and ATTSYNC, and it solved at that moment. But when I close and open the file, the problem appears again. I have to apply ANNORESET and ATTSYNC every moment. How can I definitely solve this problem?
View 4 Replies View RelatedI have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.