AutoCad :: Change Non-Xref Layers Show Up As Default
Jun 3, 2012
For several releases Autocad's layer manager has shown only XREF layers in the layer manager by default. Open a drawing with Xrefs (nearly every drawing I have ever worked with) and to access the layers that are actually *in* the drawing, I must first open the layer manager, select the "Xref" filter, and check the Invert Filter box. Then I see the layers that would more logically be shown be default.
Does any way to change this so the non-Xref layers show up be default??? I am currently using Autocad Architecture 2012.
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
I use a building key for building reference (inserted as a xref into the individual drawings) in many of my drawings. I have layers for specific areas and rooms. I turn off the layers on the appropriate drawings (if the drawing is for room 301, I make sure all other layers are off and only 301 are on).
My problem come when I add a new layer to the key and since the key in xrefd into many drawings it shows up as always being on.
This makes to have to go back and do a little bit of layer control each time I change the xref.
VISRETAIN=1 only keeps the layers set to last save and everything added to the xrefs are basically taken from the xref (color, visibility, etc). Is there a way to set a variable so that you have to check the new xref layers before they show up on the referenced drawing?
I am referencing a survey file in my site plan. Both were created using Civil 3D. I want to change the color of all of the reference files' layers to 250, so I selected them all in the layer properties manager and did so.
However, some layers are not changing colors. One layer is red in the reference file, but comes through on the site plan as magenta. Some Civil3D structures are also refusing to change colors.
I selected all of the objects in the reference file and made sure their colors were "by layer," but it did not completely fix the problem.
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a))) (defun c:lxr ( ) (setq ss (ssget "x" '((0 . "INSERT"))))
I see that the new default blending mode when you create a Group From Layers is Pass Through. I will never use this configuration, and would prefer to set my default to Normal.
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
I've inserted an external reference (as an attachment), but it does not show up in my drawing. I've checked all of the obvious things with regard to layers. I've never seen this before, but I'm sure that I will find that the answer is obvious.
We are having an issue with CAD users putting their xrefs on any layer that is current; thus creating some layer control issues. I would like to make it so that when they go to attach an xref the layer is automatically set to the "XREF" layer and then possibly reset to the previous layer.
I am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
I have an drawing that is loaded with attributed blocks. Nothing but text. When I XREF this into another drawing, none of the text shows. Layers are on, nothing is set to invisible.
I think this drawing is from an older version of AutoCAD, would that be the problem?
Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
I have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
Lets say I have file 1 and files 2,3,4, file 1 contains several layers and is an xref in files 2,3,4.
Can I somehow set a layer to off or frozen in file 1 and it will make sure to be switched off in my files 2,3,4 aswell? I have played around with New VP Freeze but if I add a layer at a later time and files 2,3,4 already have several viewports that doesn't do me very good.
AutoCAD 2008.I have read numerous articles saying that AutoCAD has made this feature drawing specific as opposed to an overall setting. What this means is that every drawing you edit layers in a xref, you get pop ups stating that layers have changed. Especially annoying when you are publishing a set of drawings. Does any overall command to turn this nonsense off completely? Or a command that will reconcile the layers automatically without the pop up message?
Any way to just bind a raster image into an autocad drawing, without having it show up in the xref manager?
How to prevent the Xref layer name from prefix of Xref dwg name? For example If I have been using one layer name as BORDER in Master Dwg. Now I going to use Master dwg As a External Reference, thereafter The Above specified Layer name are coming as Master$0$BORDER, while i am using the Master Dwg As a Xref Dwg of my another dwg. Actually I want to remove highlighted text from layer name?
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
When you XREF a drawing from another file that file is brought in along with all of its layers. Personally I do not need these layers for my access is there anyway I can combine all these to eliminate the large quantity of layers in my file? Say by layer merging. And if I do will this affect the ability of the file to revise itself?
Explanation: What I am doing is taking a bunch of engineering drawings, XREF them into my file, then creating seperate viewports for each drawing referenced in. But the key is I need these files to adjust automatically when the engineers make changes (This is done through the XREF command from what I gathered from one of my previous posts).
Im having some problems with a file im working on. I have a file with an x-ref, when im in the model space i can see all layers i want to see, but in the viewports i created in the file i noticed that 2 layers(layers that i really need to see) dont show up. Ive checked the freeze/thaw, on/off, plot/no plot settings, layerstate, i tried creating a new layer in the x-ref file(the parent file) and putting these things that dont show in the new layer but nothing changes. I'll attach two images for the layer settings.
So, whats missing in the viewports is the cyan text where it says "Klassisk sal"and some other text surrounding it and the cyan box with the text "Mko 12.002". The highlighted layers in the layer properties window are the associated with these items
Viewport.jpg
here is the layout, the layout is active and again the two highlighted layers are the ones associated with the objects missing.
My company uses tons of Xrefs - wonderful, however problem comes when having to navigate through 100's of layers to get to the main drawings layers. So I tried using the layer filters to just show my main drawings layers. Here is the problem, I you can select show all layers, not good, can select just the xrefs (show all of them or show just one of them, etc...), or you can show just the used layers - I tried that, but when you create a new layer it is not included in that filter. I tried setting up a custom layer filter, however, I don't know how to right the name or what selection to make that would allow me to exclude a set of layers.
I've been experiencing an odd problem with Xref's lately in AutoCAD 2006LT. I noticed that some of the layers in my viewports are missing. I have unloaded the xref, purged the drawing and reloaded the xref and each time it comes back up missing the majority of the layers in the external reference. I've checked to make sure that there are no xref's associated with the xref file to ensure that it's not an issue with a sub xref as well. I have downloaded a trial copy of 2013 and it mentions unreconciled layers and shows all layers in the view ports. In my troubleshooting I've checked for frozen layers, layers turned off, the location of Xref'ed files, ensured that no xref’s are on frozen or turned off layers and several other possible problems.
What seems strange to me is that I can see a few layers but not all layers associated with the xref in AutoCAD 2006LT. I've also checked to make sure that the layers are not frozen in the viewport as well. I use that feature often and depend on it for the drawing that I do.
If I start a drawing from scratch or go back several generations I can see all the layers just fine. It only seems to affect the latest generation of this current projects files.
We have our pipe networks living in a master file that is XREF'd to our sheet files. Now, the pipe and structure objects are all the layer C-PNET. The style for the pipes is comprised of the layers C-STRM-PIPE (for pipe walls) and C-STRM-PIPE-PATT (for the center line that is the width of the pipe). When I go into the XREF I cannot freeze OR change the color of the layers comprising the pipe style even though they are all set to ByLayer in the style dialog. The only way to freeze the network is to freeze the layer the pipe network is on C-PNET. However, this presents other problems with our file setup and we dont want to universally freeze C-PNET.
why we cant freeze the portions of the pipe network that are defined in the style as being on C-STRM-PIPE, and C-STRM-PIPE-PATT? If so, how do we remedy this?