AutoCAD 2013 :: Plotting Xref PDF
May 9, 2012
AutoCAD 2013 Windows XP
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer.
In Drawing B the pdf is on 0 layer.
The 0 layer is not frozen and is set to print.
The xref in drawing B is set to overlay and relative (I tried absolute).
I can see the pdf in drawing B.
PDFrame is set to 2 in dwg A and B.
View 4 Replies
ADVERTISEMENT
Dec 4, 2013
have xrefs in drawing froze some of the xref layers, changed colors on some others looks great on screen, but all the original colors show on plot, along with the frozen layers...is this to do with the xref?
View 2 Replies
View Related
Jan 4, 2013
Working in AutoCAD 2013
Plotting from the Layout - Model is plotting fine, XREF Titleblock is plotting out too light, about 20% of what model plots.
XREFd on 0 layer (tried on different layer, result = no difference) all other aspects of plot are correct
XDWGFADECTL set at 1
LAYLOCKFADECTL set at 1
Print Preferences
- line and text (not photo)
- dpi 600
I found a work-around but it isn't realistic in the longterm, I inserted the Title block as a BLOCK and exploded it, and then the titleblock plotted fine with each of the different Title Block layers plotting correct to pen width.
View 3 Replies
View Related
Aug 28, 2012
problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
View 3 Replies
View Related
Jan 10, 2014
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
View 4 Replies
View Related
Oct 31, 2013
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
View 1 Replies
View Related
Jan 22, 2013
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
View 0 Replies
View Related
Aug 9, 2012
I'm having issues plotting using dwg to pdf. It prints perfect printing to my printer but when I create a pdf using dwg to pdf it does not print what is previewed.
I created block with solid hatches for my mark/schedule boxes and detail bubbles so I wouldn't have to trim whats behind it.
View 9 Replies
View Related
Oct 5, 2013
I have been working with a large scale architectural drawing provided by my cleint's architects. Since I usually work in black on a white screen, I have been working from paperspace with the viewport set to.monochrome. Up until Thursday, whenever I printed to PDF, I would get a monochome image which is what is supposed to happen.
However, In order to provide my client with a colour coded image, I changed some settings and printed a colour PDF. Now I cannot get it to go back to Monochrome. What setting has changed. I opened an earlier version of the same drawing and output a PDF from that drawing - black and white PDF. Try it from the current version of the drawing, it comes out in colour.
I have compared page setup settings, output setting, viewport 'MO' settings, they are all the same. How do I get back to black and white output.
View 4 Replies
View Related
May 24, 2013
I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies
View Related
Jan 28, 2013
We setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
View 3 Replies
View Related
May 16, 2013
I have a large number of drawings with template details of a printer that is now longer available (we moved offices). I therefore want to write a macro that instead of trying to use the template detailed printer and then failing to the None printer instead goes straight to the new printer (Lanier MPC2500). Once I get this basic task completed I'll then add additional functionality.
The macro at present is:-
^C^C-plot;y;; \mwperdc03LANIER MPC2500;;A3 (297 x 420 mm);m;l;n;l;1:1;0.00,0.00;y;monochrome.ctb;y;n;n;n;n;y;
I also know where it's failing (the first in the path) as this is the macro escape character to enable the user to add information. If I then manually enter (or paste) the link \mwperdc03LANIER MPC2500 into the command line and press enter the rest of the macro executes and I get a print output. I've attached a screenshot of the command line for info.
I've read that instead of using the character in the path I should use the /. I've tried this but it doesn't seem to work.
Is there another method of embedding paths into Autocad LT so this will operate or a better workaround?
I'd thought of using DIESEL but I can't see any suitable commands in the command library.
>>>>>Why did they choose a as and escape character?????
View 5 Replies
View Related
Dec 12, 2012
I have multiple drawings I've been working on that have tif files laid in the background that I have been making my drawings over the top of. In order to make the linework easier to see, both on screen and on plot, I applied a 65% transparency to the layer containing the tif. Everything worked fine, and printing worked great, but when I tried to plot them to pdf, the transparency failed to plot properly. I tried PrimoPDF and the transparency worked, but the paper sizes didn't include Arch D and the plot didn't look as crisp as the one produced by AutoCAD. In the end, I ended up pay $5 per print to have the DWG files processed, because I needed the transparency to plot properly. I would like to figure out what the problem was so that next time I need to send out for prints.
View 2 Replies
View Related
Apr 9, 2013
I'm having a problem plotting to pdf (using ScanSoft Pdf Pro 4) causing Autocad Civil 3d: Infrastructure Design Suite.
When I plot in Civil 3d 2009 I have no problems but we recently switched to Autocad Civil 3d: Infrastructure Design Suite and when I try to plot a pdf 24x36 it looks correct in the plot preview but my final pdf size comes out 36x36. I have tried everything I know...
Create a new sheet size
I can't just save as an earlier version and plot in C3d 2009 because my alignments gets screwy.
View 9 Replies
View Related
Mar 25, 2013
Running AutoCAD 2013 on Windows 7 64-bit OS Dell desktop.Whenever I plot 1 in 4 of the times, AutoCAD freezes, usually crashing. Happens both when either typing the command or using pulldown option.Freezes before I get a chance to choose which printer/plotter but plotting with HP Designjet T1120.
I am assuming downloading the HP Universal driver wouldn't do me any good. I am not crashing after I send anything to plot, but before, immediately after the 'Plot' window comes up, it freezes.
View 4 Replies
View Related
Apr 3, 2013
An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
View 4 Replies
View Related
Sep 25, 2012
when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
View 9 Replies
View Related
Aug 7, 2013
I have created some rectangles with a solid fill hatch in paper space in different colors, on different layers., when i plot them, they plot in black. what can i have checked or not checked to solve this? the viewport that i have in the layout plots in color, i am using the acad plot style.
View 9 Replies
View Related
Nov 25, 2013
I have a strange thing going on where image frames show up when I plot to PDF. I have set the image frame variable to 2. There is no issue when using a local printer or using print preview for said printer. When plotting or previewing using any of the PDF drivers image frames appear around my title block logos.
View 1 Replies
View Related
Mar 13, 2013
I've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
creating measurable PDFs from Autocad plots?
View 4 Replies
View Related
Oct 23, 2013
How do I get rid of them???
View 9 Replies
View Related
Jul 24, 2013
I am using autocad 2013 on Mac and plotting to hp designjet 510. Lines are always missing when I print especially medium to thin lines or hidden lines or for example hatch tile lines. I use the plotter also on a pc and there are no problems at all. I changed the thickness of my lines in ctb and still have lines missing. I change percision to 1 and same thing. If I print draft, normal or best I still have problems. I know how to spool and use in built memory on pc but can not find something similar on the mac and dont know if that will work, as i printed same drawings from pc. It seems that when there are close lines together or dense lines in an area, it just skips them.
View 9 Replies
View Related
Sep 5, 2012
I am trying to plot a drawing with 80% transparency on the xref layers, and use a pen table to assign line thinkness (printing in black and white). But, when I go to print, AutoCAD completely ignores both of these and prints the drawing all lines at the same intensity and thickness.
View 2 Replies
View Related
Apr 27, 2013
I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
View 6 Replies
View Related
Nov 15, 2013
I am having trouble when I import XRef’s and the scaling of lines. When the drawings are importing the hidden lines do not show up as hidden lines. I know this might be a scaling issue but I do not know how to correct this. The XRef drawing is drawn at a scale of 1-1/2”=1’-0” and set to print on a letter size paper but the drawing which it is imported to is set to be printed on a 11x17 but the viewport is still at the 1-1/2” scale and the lines are shown as continuous.
View 6 Replies
View Related
Oct 30, 2013
I have a drawing that I cannot detach the Xref. It's not making sense.
When I try to detach the Xref I get a message saying
"Xref xxxxx.dwg has multiple references. Not detached"
I've attached a screenshot of what I'm seeing.
View 2 Replies
View Related
Sep 27, 2012
I know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
View 1 Replies
View Related
Jan 29, 2013
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
View 1 Replies
View Related
Oct 3, 2012
I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies
View Related
Oct 16, 2013
I have attached my template drawing and a plotted pdf file of my template.
My question is the logos in the title block are hand drawn dwg logos. My client does not like the pdf file because the ITC logo text changes color and looks grainy or washed out. It is not crisp and clean. This is VERY IMPORTANT to him. Why do they change so as in the colors of the ITC logo change to a light blue not the 178 I set it at in AutoCad. when I plot a pdf the file. When plotting I use the DWG to PDF option.
View 7 Replies
View Related
Jan 7, 2014
we have a drawing containing different profiles that we use for our plastic fabrication workshop, however will not print the entire profile only the beginning and end even thou is shown in the plotting preview window, we have changed all potting styles and settings trying to make it work with no luck.
View 5 Replies
View Related
