AutoCAD Map 3D :: Text Plotting Outside Viewport In 2013 But Not In 2012?
Oct 3, 2012
I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
I have attached my template drawing and a plotted pdf file of my template.
My question is the logos in the title block are hand drawn dwg logos. My client does not like the pdf file because the ITC logo text changes color and looks grainy or washed out. It is not crisp and clean. This is VERY IMPORTANT to him. Why do they change so as in the colors of the ITC logo change to a light blue not the 178 I set it at in AutoCad. when I plot a pdf the file. When plotting I use the DWG to PDF option.
I am using AutoCAD LT 2013 and at the moment i am just using the dwg to pdf.pc3 included in AutoCAD.
All of the text in my drawings is the same font (ISOCPAUS). Up until about a week ago, i could plot bold & italic text using the dwg to pdf plotter. Now, I cannot and i don't know what has changed to make this happen. Underlined and overlined text still plots fine to pdf. Everything appears correct in model space, paper space layouts, in previews and if i plot to any of the printers in the office, but once i plot to pdf, the bold and italic is gone.
Is it possible to find and zoom to text without switching back to the model space.
ie I am in a viewport in paperspace and i want to find text which resides in model space. I want to zoom to that text in the currently active viewport and not switch to its location in model space.
Drawings are only plotting the first viewport inserted into paperspace, and will only plot live paperspace work if there are no viewports at all... this is a new problem, but has hit an entire set of drawings!
I am curious what would cause my viewport to print as if it is filled with solid hatch? I haven't changed any settings for the viewport and even recreated it from scratch. In my print preview it shows it will print as it looks on the screen, however when it actually prints, it's filled in solid.
I brought a normal 4 sided viewport into my layout, but needed to clip and make a viewport with 6 sides. I have also tried to redraw this by using a polygonal viewport. When I go to plot the page, parts or all of the viewport boundaries are on. It doesn't matter if I go to layer control and turn the layer off or freeze or select the non-plotting icon.
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
Is there a way to "disable" the display of the viewport "outline" so that it is not seen when looking at the paper space tab on a computer screen? Kind of like how images have frames but you can "hide" them.
I need to be able to import the airfoil geometry of a NACA 2412 airfoil. I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD. What function would I use? Spline? If so how do I get it to draw all the points I have? I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.
After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
My company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine. After a plot, when someone goes to save and close the drawing, AutoCAD crashes. It does not matter which plot device is used, the result is the same. This includes the plot devices included in AutoCAD. I have reinstalled autocad on one machine, no lisp commands, same result. I have already tried some of the fixes proposed in other threads, nothing has worked.
problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400 Intell Core Duo @ 2.33GHz 2GB RAM OS: XP pro ver.2002 (w/ SP3) AutoCAD Architecture 2012
I either have bad settings or have found a bug in 2012 when plotting parcels.
I have a P-drain Parcel setting for major drainage areas - I set the display to the C-PROP-BNDY layer which seems to be OOB for the entire 'property'. I create the parcels from poly lines on the P-DRAIN-AREA layer.
The parcels go to the C-PROP layer. My problem is that I can't seem to get the property lines to plot. I try to set C-PROP-BNDY to the correct color, yet when I plot, the lines don't show.
I have been having this issue for a few weeks, where my contour lines will not plot in paper space, but the labels do. If I plot from model space everything shows up. All layers have been checked and nothing is frozen or turned off in the viewport.
When plotting profile plan sheets, there is an error in the scaling of the grids. I can not seem to figure out why the plotter is not plotting correctly. I did try creating a pdf of the plan sheet and plotting, but still have the same scale error. It starts to get off scale after about 500 feet, so the error in scale is small, but still there. It is off by about 2 or 3 feet at 500 feet on the profile grid.
How to set the annotation scale for a viewport in version 2012. I am not having any success finding what the variable is that needs to be set. Is this possible?? If so, how?
When I plot to paper from TV2012, I'm good with monochrome - black lines, white background - awesome.
I would *like*, however, to plot a few things to PDF, but retain the view I have on my display - I.E., lines/labels of various colors and a BLACK background. I've been poking around for a bit, and if there's a way to make that setting, I'm no finding it. Everything I try has gotten me colored lines/labels on a white background.
On PC_71, While ploting(creating the pdf via autocad) the pdf,its everytime coming in portait format but we want in landscape format.
On PC_71, if we create the pdf of any document by our Adobe pdf printer PRT13 then its creating pdf properly for both portait and landscape format . But for any autocad drawing file , the pdf printer PRT13 is not creating in landscape format.
I also cross-checked all plot setting with other proper working PC , its same then also its behave differently.
And if we create pdf on any other PC then its creating the pdf properly for any drawing but not on PC_71.
Also 1 more typical point I noticed that if we delete any pdf file from PC_71, then after refreshing its again appeared on same location.
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
While using AutoCAD 2008 LDD, I was able to set my point label size so that it looked the same in Model Space and Paper Space. I have my Model Space at 1:1, and my Paper Space Viewport set at the Scale Factor as needed, 1" = 50' i.e.. I now am using Civil 3D 2012 and have a decent grasp of Point Label Styles, the problem I am having is that when using the same parameters as mentioned before, my Point Label is at the right size in Model Space, setting the height at a size comparable to the Drawing Scale, such that if the Drawing Scale within the Viewport was 1" = 60', I would set the text size 4.8, but when doing this, it makes my Point Label text size huge.