I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 RepliesI have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
View 2 Replies View RelatedI currently use code similar to Lee Ambrosius's 2009 AU handout that shows how to set/create custom properties. URL.... search for the header 'Adding Sheet Set and Sheet Properties'.
I have now accumulated numerous unused custom properties in my sheet set. I haven't been able to find a way to delete these additional custom properties.
Because I use multiple subsets with multiple sheets for printing, I would rather not have to go through all the sheets, store all the custom properties I need, destroy all the existing custom properties, and then re-create just the ones I need. how to delete individual custom properties.
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
I have a network with Windows XP and Windows 7.
Printers: from HP 5000 series to a KIP 3000.
CAD,from 2008 to 2012 versions.ALL of the PCs are having this strange behaviour:Open a drawing, Press File then Plot and..
Scenario 1: if the KIP3000 is online then plotting window comes in few seconds, a normal, decent delay!
Scenario 2: if the KIP 3000 is offline then plotting can be delayed to minutes!!!
Downloaded the drivers from KIP web site, installed and tested, prints fine once the above issue with delay is sorted! I’m guessing that is something built-in CAD, pre-emptive, background checks running for printers status when you attempt to plot to the printer / plotter !
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedWhen I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedI am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
I am having trouble plotting the lines from my drawings. From sheet set manager. It plots the image, text and border xref but when the lines start to plot they turn off in task manager from gis all turn to exclamation points. These lines are in the background from gis.
View 1 Replies View RelatedI have 64 bit machine, Windows 7, kipp plotter, and two sharp printers.
When I send a sheet set manager plot to any of my output devices I get an autocad error. That boots me out of Autocad. I have used this in the past with 32 bit machine, Windows XP , kip plotter and two sharp printers and have had no issues. It worked great.
I'm trying to incorporate in my new workplace the Sheet Set in our plan production.
But one of the powerfull thing of the SSM is to publish multiple (or single) sheets at a time.
Well, i tryed it since a few months in and out publishing via the style sheet on the sheet set template i'm building and it doesn't print.
The publishing icon in the status bar of civil 3d 2012 keeps on going for ever !!! (Even when i cancel the job, it doesn't stop the icone, like it's jamed)
Btw, even if i pass by a drawing that isnt in the SSM and choose several layouts to publish it does the same thing too.
I use to do this on a 2008 version of Autocad.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
Drawings are only plotting the first viewport inserted into paperspace, and will only plot live paperspace work if there are no viewports at all... this is a new problem, but has hit an entire set of drawings!
View 1 Replies View Relatedis it possible to plot a viewport containing many layers and colors just in one specific color without changing the colors of all the layers?
View 3 Replies View RelatedI am curious what would cause my viewport to print as if it is filled with solid hatch? I haven't changed any settings for the viewport and even recreated it from scratch. In my print preview it shows it will print as it looks on the screen, however when it actually prints, it's filled in solid.
View 9 Replies View RelatedHow do I get rid of them???
View 9 Replies View RelatedI try to add the dwg to pdf.pc3 file to my AutoCAD LT 2014 (german) When I click on manage plotter a File Explorer Windows pops up instead of the plotter manager.
View 6 Replies View RelatedI am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies View RelatedI brought a normal 4 sided viewport into my layout, but needed to clip and make a viewport with 6 sides. I have also tried to redraw this by using a polygonal viewport. When I go to plot the page, parts or all of the viewport boundaries are on. It doesn't matter if I go to layer control and turn the layer off or freeze or select the non-plotting icon.
View 8 Replies View RelatedWhy my viewport is moving to the right when I print it in batchplot.
I tested by printing the outline of the vport and opening the resulting PDF in a PDF viewer.
The vport is exactly the same dimension but is about .5 inch off to the right.
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
New hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
Ive got a A3 drawing all set up to plot to my printer and it works fine.
Unfortunately the same cannot be said when I use the _exportpdf command (or the PDF function in the ribbon):-
- If I export using the current layout then the top and bottom of my title block are chopped off.
- If I change the paper size to A3fullbleed then it does plot the whole drawing, but not to scale (even though its still set to 1:1
- Changing to the other A3 options goes back to chopping off the top and bottom.
From my limited knowledge It appears that the columns need adjusting, trouble is, i'm not sure how?
how I set up my plot style manager to print color and maybe explain why it isn't printing color now?
View 3 Replies View RelatedIs there a way to set the Dwg to Pdf.pc3 so that when I hit plot, it "knows" to save the pdf in the bloody folder that the source .dwg file is located....I can see how to set it to 1 single default folder in Options ( i.e. my main Clients folder) but really, how to get to to plot to the source folder..... has got to be less than 1/2 hours worth of coding....I get pretty tired of browsing/scrolling etc to where I want the pdf to end up.
View 2 Replies View RelatedI'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies View RelatedMy computer crashed. Fixed it, but when I use "Cutewriter" now, it doesn't show
the different line weights.
it seems that it doesn't pick up the different weights.
am using ACAD2008 on windows XP. I have just started having this problem that if I choose to plot from a window the plot dialogue box locks up after the window is selected and the command line is still asking for the corners of the window to be selected. But everything plots ok if I use extents.
View 2 Replies View RelatedWe use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
We've got an HP Designjet 455C attached to an SBS 2003 computer.
From Autocad, I can print when I set the page size to A4 - as expect, it prints a nice A4 sized plot on the A1 width roll. But if I try to print full size plots, nothing happens; the document spools, but the printer does nothing.
It must be something to do with paper size or orientation, but I can't find what. I wondered if there was anything well known I should try (I'm not that familiar with Autocad - yet).
Part of the problem was inconsistency.. sometimes test documents would print, and then they wouldn't! I also got one which seemed to print at the right size, but was only printing part of the file content. These are existing Autocad files, with a printer that has been working in the past.