Why my viewport is moving to the right when I print it in batchplot.
I tested by printing the outline of the vport and opening the resulting PDF in a PDF viewer.
The vport is exactly the same dimension but is about .5 inch off to the right.
When I do a Batch plot, I am getting an error message stating that my background plotting is on. I can't do any batch plotting with this on. How do I turn this off?
View 2 Replies View RelatedI am having issues batch plotting in LT 2010.
I am using Windows Vista.
I go to the batch plot. Load the drawings I want to plot. I then load the page setup I want to use. None of the files plot. The error says that the device doesn't support the output size.
The weird thing is that I can plot using those same page setups individual files, just not as a batch.
I usually make pdf's by plotting each layout to pdf then combining them with adobe acrobat. Recently i have tried the batch plot to pdf and found that i like it much better but im having a problem with it. I have set up my page sheet manager and have imported my plot sheet settings from a different file. I have checked and double checked that the settings on this file is correct.
My problem is that when i create the batch plot and select the page setup when i create the pdf it cut the left and right side of the page off like there are margins or something. I have created a pdf my plotting to pdf on an individual page and printed it and compared to my batch plot and they are the same scale and size on the paper but the batch plot cuts it off on the sides. I need to get it to print like the plot to pdf so that it is to scale.
While batch plotting to a multi page PDF in AutoCad 2012 using Adobe Acrobat:
My pages come out with a blank / empty viewport,
The title block is on the page and nothing else plots on the page.
This is only happening with one of the files I am working in. Other DWGs are PDFing normal.
Is there a way to "disable" the display of the viewport "outline" so that it is not seen when looking at the paper space tab on a computer screen? Kind of like how images have frames but you can "hide" them.
View 4 Replies View RelatedIs there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
Drawings are only plotting the first viewport inserted into paperspace, and will only plot live paperspace work if there are no viewports at all... this is a new problem, but has hit an entire set of drawings!
View 1 Replies View Relatedis it possible to plot a viewport containing many layers and colors just in one specific color without changing the colors of all the layers?
View 3 Replies View RelatedI am curious what would cause my viewport to print as if it is filled with solid hatch? I haven't changed any settings for the viewport and even recreated it from scratch. In my print preview it shows it will print as it looks on the screen, however when it actually prints, it's filled in solid.
View 9 Replies View RelatedHow do I get rid of them???
View 9 Replies View RelatedNew hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
If there was a way to plot multiple dwg files in a single go all using the same plot settings. Is it possible to do this in AutoCad without having to use another program? I am using AutoCad 2009 LT by the way.
Also, is there a way to save a certain plot setup as the default so that I don't have to switch my page setup to <previous plot> every time I open a new drawing?
My colleges and I are having trouble plotting a batch of drawings (Layouts) using sheet sets. We believe that we have set up all the parameters correctly in order to accomplish what we want. First off, we have set up the page set up in each layout properly. We have also set up page set up overrides to plot sheets at different sizes. The problem is that when we send a batch of drawings ( ex: 30 drawings) only the first drawing in the batch gets plotted. We have also tried plotting from the Publish dialog box and still that only plots the first sheet.
Do you think that the problem is at the networked software that the plotter uses? Or is this having to do with additional parameters in the sheet set that I am missing?
I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies View RelatedI brought a normal 4 sided viewport into my layout, but needed to clip and make a viewport with 6 sides. I have also tried to redraw this by using a polygonal viewport. When I go to plot the page, parts or all of the viewport boundaries are on. It doesn't matter if I go to layer control and turn the layer off or freeze or select the non-plotting icon.
View 8 Replies View RelatedI have two sheet files (files which reference other drawings/data and contain multiple layouts) which do not plot correctly in a batch. Upon opening the files all profile surfaces (existing and proposed) do not display. I run SYNCHRONIZEREFERENCES to make the profiles show up. I would love a solution to that, but that's a different topic. So now the profiles show up, in all tabs and even in a plot preview. However if I try to run the Publish command and print all tabs to either .pdf, .dwf, or the plotter the profiles do not show up. I must go to each and every tab and plot the sheets individually.
View 8 Replies View RelatedEarlier I asked about a "Issued fo Construction" block with automatic date....I was thinking if there is anyway to "publish" ~65 loop diagrams and it insert the "IFC" block on it's own? When publish is finished, I open any loop drawing and the "IFC" block is NOT present. Can this be done with a script?
View 0 Replies View RelatedTrying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
View 2 Replies View RelatedI have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 Replies View RelatedI am trying to batch plot 60 .dwg files to PDF. When I do this, it slices off a piece of the title block on the right.
When I plot a single files I can set it to extents, 11x17, and center the plot, and the PDF comes up perfect.
I save this page setup and try to batch plot again, and when there is only one file on the list, my saved page setup is available in the dropdown menu. The second I add another one, my setup disappears from the list, and the import option doesn't appear to work (I choose a .dwg that my setup has been applied to and nothing happens).
Is there a trick to applying a saved page setup to an entire list of drawings in the batch plot utility?
My query is to do with panning around a Viewport in paperspace.
I have one drawing of a venue with contents and have the same venue but with different contents directly below it.
When I copied the venue I locked the ortho and copied the venue.
Now my paperspace looks at the first venue.I have copied that paperspace but wanted to make sure that when I pan down to fit the venue into the viewport that I lock the ortho and hit the same view size and location on the paper as the view before.
Is there a keyboard short-cut to lock the ortho as I pan down to the model space I want to see?
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
I cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies View RelatedI recently upgraded to a new PC.
We get a lot of files from customers where there are multiple drawing borders all in model space.
Sometimes as many as 150-200 borders in one file that we need to print for the shop floor.
Years ago, I wrote a LISP routine that prompts for printer settings (Fit or To scale, etc.) and then prompts for
2 corners of each border and then writes a script file and launches it to batch plot each drawing.
My thinking was that I had to manually pick each drawing anyway, this LISP routine saved me from having to issue the plot command over and over.
Anyway, since my PC upgrade, the LISP routine fails.
There is a line of code that answers the plot prompt for output device name where I have the same printer as always.
When the script runs up to that line, AutoCAD tells me that printer is "not found".
So then it keeps reading the rest of the script lines which answer other plot prompts and repeatedly says "device not found".
If I manually print, I can choose the same print settings in the dialog box that the script file has and it can "find" that same device.
Why I can print manually but the LISP/script file gives me a "not found" error.
BTW, when I upgraded my PC, I also upgraded AutoCAD from 2012 to 2013..
I have run the DWG Compare Plug-in on two DWG files. The results show the plan in grey while the differences in plans are showin in color. If I plot an individual layout to PDF the plot looks perfect meaning the plan is grey and the differences are color.
When I batch plot, all of the layouts lose their ability to plot the results of the DWG Compare and just print like the original DWG file whether it be mono or color. is there an entirely different way to go about batch printing to a combined PDF the results of a DWG Compare?
When I'm batch plotting several drawings, I'm trying to add a block from a page setup to each print.
View 4 Replies View RelatedIs there any way for me to choose a bunch of .dsd files, and have those be batch plotted?At the moment I have to publish one .dsd file at a time, and each .dsd file can take about 10 minutes to go through all the layouts I have.
Does Autocad have that capability built in? Or is this a problem that can be solved with scripts?
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
I'm working in a locked viewport. Every time I move the view with the middle mouse, I lose the selection. Is there a way to change this?
View 5 Replies View RelatedI'm working on this massive architecture scene and i'm trying to move some rather small braided steel cable in the scene when i go to move it the objects moves in rather big increments instead of small ones. I check to see if snaps was on and its not, on what i can do to can more precision over my placement of these cables.
Custom Core i7 at 3.99 GHz, 8 gb ram, Nvidia Quadro FX 3800