Earlier I asked about a "Issued fo Construction" block with automatic date....I was thinking if there is anyway to "publish" ~65 loop diagrams and it insert the "IFC" block on it's own? When publish is finished, I open any loop drawing and the "IFC" block is NOT present. Can this be done with a script?
View 0 RepliesI'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies View RelatedWhen I'm batch plotting several drawings, I'm trying to add a block from a page setup to each print.
View 4 Replies View RelatedMy storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.
View 4 Replies View RelatedMy layout is 11x17 and within the printable area displayed. Page setup is 11x17, Landscape But my layout gets cut off when Publishing to PDF. But is OK when Plotting PDF. I found an earlier post talking about PDF scaling having to be set to None. I found a scale setting in my CutePDF Writer that is set to 100%. There is not a None selection.
Another interesting observation is that Publishing will print the sheet upright. Plotting prints the layout rotated -90.
I am using Publish to print multiple layouts to one file.
We have written a .Net ACAD2014 plugin to publish PDF files to be used by accoreconsole for batch processing and we have found that dates contained with the drawing are incorrectly formatted using the American date format mm/dd/yy.
Within ACAD2014 using netload and executing the command, dates contained within the title block are correctly formated using the current culture information in this case en-AU (dd/mm/yyyy).
When performiing a netload within accoreconsole the dates are formatted as en-US (mm/dd/yy) even though when reporting the current culture from within accoreconsole it is reporting as en-AU.
New hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
When I do a Batch plot, I am getting an error message stating that my background plotting is on. I can't do any batch plotting with this on. How do I turn this off?
View 2 Replies View RelatedIf there was a way to plot multiple dwg files in a single go all using the same plot settings. Is it possible to do this in AutoCad without having to use another program? I am using AutoCad 2009 LT by the way.
Also, is there a way to save a certain plot setup as the default so that I don't have to switch my page setup to <previous plot> every time I open a new drawing?
My colleges and I are having trouble plotting a batch of drawings (Layouts) using sheet sets. We believe that we have set up all the parameters correctly in order to accomplish what we want. First off, we have set up the page set up in each layout properly. We have also set up page set up overrides to plot sheets at different sizes. The problem is that when we send a batch of drawings ( ex: 30 drawings) only the first drawing in the batch gets plotted. We have also tried plotting from the Publish dialog box and still that only plots the first sheet.
Do you think that the problem is at the networked software that the plotter uses? Or is this having to do with additional parameters in the sheet set that I am missing?
I have two sheet files (files which reference other drawings/data and contain multiple layouts) which do not plot correctly in a batch. Upon opening the files all profile surfaces (existing and proposed) do not display. I run SYNCHRONIZEREFERENCES to make the profiles show up. I would love a solution to that, but that's a different topic. So now the profiles show up, in all tabs and even in a plot preview. However if I try to run the Publish command and print all tabs to either .pdf, .dwf, or the plotter the profiles do not show up. I must go to each and every tab and plot the sheets individually.
View 8 Replies View RelatedI am having issues batch plotting in LT 2010.
I am using Windows Vista.
I go to the batch plot. Load the drawings I want to plot. I then load the page setup I want to use. None of the files plot. The error says that the device doesn't support the output size.
The weird thing is that I can plot using those same page setups individual files, just not as a batch.
I usually make pdf's by plotting each layout to pdf then combining them with adobe acrobat. Recently i have tried the batch plot to pdf and found that i like it much better but im having a problem with it. I have set up my page sheet manager and have imported my plot sheet settings from a different file. I have checked and double checked that the settings on this file is correct.
My problem is that when i create the batch plot and select the page setup when i create the pdf it cut the left and right side of the page off like there are margins or something. I have created a pdf my plotting to pdf on an individual page and printed it and compared to my batch plot and they are the same scale and size on the paper but the batch plot cuts it off on the sides. I need to get it to print like the plot to pdf so that it is to scale.
While batch plotting to a multi page PDF in AutoCad 2012 using Adobe Acrobat:
My pages come out with a blank / empty viewport,
The title block is on the page and nothing else plots on the page.
This is only happening with one of the files I am working in. Other DWGs are PDFing normal.
Why my viewport is moving to the right when I print it in batchplot.
I tested by printing the outline of the vport and opening the resulting PDF in a PDF viewer.
The vport is exactly the same dimension but is about .5 inch off to the right.
I am trying to batch plot 60 .dwg files to PDF. When I do this, it slices off a piece of the title block on the right.
When I plot a single files I can set it to extents, 11x17, and center the plot, and the PDF comes up perfect.
I save this page setup and try to batch plot again, and when there is only one file on the list, my saved page setup is available in the dropdown menu. The second I add another one, my setup disappears from the list, and the import option doesn't appear to work (I choose a .dwg that my setup has been applied to and nothing happens).
Is there a trick to applying a saved page setup to an entire list of drawings in the batch plot utility?
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
I cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies View RelatedI recently upgraded to a new PC.
We get a lot of files from customers where there are multiple drawing borders all in model space.
Sometimes as many as 150-200 borders in one file that we need to print for the shop floor.
Years ago, I wrote a LISP routine that prompts for printer settings (Fit or To scale, etc.) and then prompts for
2 corners of each border and then writes a script file and launches it to batch plot each drawing.
My thinking was that I had to manually pick each drawing anyway, this LISP routine saved me from having to issue the plot command over and over.
Anyway, since my PC upgrade, the LISP routine fails.
There is a line of code that answers the plot prompt for output device name where I have the same printer as always.
When the script runs up to that line, AutoCAD tells me that printer is "not found".
So then it keeps reading the rest of the script lines which answer other plot prompts and repeatedly says "device not found".
If I manually print, I can choose the same print settings in the dialog box that the script file has and it can "find" that same device.
Why I can print manually but the LISP/script file gives me a "not found" error.
BTW, when I upgraded my PC, I also upgraded AutoCAD from 2012 to 2013..
I have run the DWG Compare Plug-in on two DWG files. The results show the plan in grey while the differences in plans are showin in color. If I plot an individual layout to PDF the plot looks perfect meaning the plan is grey and the differences are color.
When I batch plot, all of the layouts lose their ability to plot the results of the DWG Compare and just print like the original DWG file whether it be mono or color. is there an entirely different way to go about batch printing to a combined PDF the results of a DWG Compare?
Is there any way for me to choose a bunch of .dsd files, and have those be batch plotted?At the moment I have to publish one .dsd file at a time, and each .dsd file can take about 10 minutes to go through all the layouts I have.
Does Autocad have that capability built in? Or is this a problem that can be solved with scripts?
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
Result - only active dwg prints
I want to block the information of plotting in the editor see example (french version) :
***Zone effective du tracé: 290.70 de large par 400.97 de haut
Fenêtre de tracé 2.
The information is showing when i plot. How i can do that ?
I'm having issues with plotting. I have my page setup as 17 x 22 (Landscape) and am designating the plot area to plot extents. I am trying to plot to 22 x 34 (size "D" portrait). The current paper loaded is 22" in a HP Design jet T770. When I do a plot preview, the drawing looks correct. However, when it plots it trims off the top part of the drawing. I'm trying to figure out what is causing this. The drawing is orientated correctly when it comes out of the plotter so I know it's not a portrait/landscape issue.
I just tried plotting a 30 x 42 titleblock to the same size paper "D" portrait, and get the same problem. This happens if I use extents and window.
I made a 24 x 36 title block with attributes and saved it as a wblock.
1) When I inserted the title block into a 24 x 36 paper space, The titleblock does not fit. and the texts are messed up as well. The text are in in their respective places. What I did to create the title block is to basically created a title block border and then created the text. So, I made a block out of the borders and then a block out of the text then I made a block out of the whole thing (text and border). After i saved it as a wblock. When saving as wblock i chose entire drawing and once i chose object.
2) When I try to test plotting with this title block i made (even though it does not fit in) it does not show up in print preview.
How do I make some of the text Bold and others not? but keep them all same style?
The incorrect plotted logo is xref'd into a title block. It appears fine on a plot preview. The same titleblock is Xref'd into all other drawings with no problems. I have tried printing both directly from my desk to the printer, and plotting it to a file. I have tried PDFing it in both Bluebeam and Adobe. Bluebeam PDF has lines vertically, evenly spaced, throughout the entire drawing; Adobe is unexceptably blurring. I have purged and audited all the Xref's in the drawing as well as the drawing itself. I have even created a new drawing and rexref'd everything and brought the work over. Nothing has worked. There is nothing more frustrating then having all the work done but not being able to submit it. I already spent 2 days trying to fix this and the project goes out at the end of the week.
View 6 Replies View Relatedbatch-editing of my titleblock. I have one drawing with 20 layouts. In each layout I have inserted our titleblock which has attributes/fields. One of the fields is the drawing revision #. I would like to be able to update the revision # so that it automatically changes it in all of the layouts (currently I have to manually change each instance).
View 2 Replies View Relatedwhen I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.