I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 RepliesI know the possibility of a plot style just disappearing is slim to none, but I have this user that constantly claims her plot styles have "disappeared".
When I check them, the entire "Plot Style" folder is gone. One day it's there the next it's gone.
She also has this problem with the DWG to PDF print option. It was there, now it's gone. She claims she isn't deleting anything. I will get them back on her PC and a few months later they will be gone.
She is a contract worker who also spends time at her office off site. I am not sure what version of AutoCAD she is using. I manage an AutoCAD group of about 20 users and none have this problem.
I recently downloaded student version of architecture 2011 and works great, but how do I get rid of the message that plots with my drawings, produced by autodesk education product.
View 2 Replies View RelatedI have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
Is it possible to change a drawing using named plot styles (.stb) to colourdependent plot styles (.ctb) within the drawing itself? The variable'pstylemode' comes up as read-only.
View 6 Replies View RelatedHow do I configure AutoCAD 2010 to point to a specific folder for the plot styles (ie. *.ctb files)?
View 2 Replies View RelatedSo the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedIs there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies View RelatedWe have some old drawings that use to have name dependent plot styles. We just need to plot them for reference and tried to convert them to the Monochrome ctb. But when you change it to Color dependent in the options nothing happens and if you type in pstylepolicy it tells me it is read only. When you plot it only gives you the option of the stb plot styles and will not change to ctb. The old stb styles are long gone and it wanted to print in color (lots of yellow back then).
View 1 Replies View RelatedNew hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
Ive got a A3 drawing all set up to plot to my printer and it works fine.
Unfortunately the same cannot be said when I use the _exportpdf command (or the PDF function in the ribbon):-
- If I export using the current layout then the top and bottom of my title block are chopped off.
- If I change the paper size to A3fullbleed then it does plot the whole drawing, but not to scale (even though its still set to 1:1
- Changing to the other A3 options goes back to chopping off the top and bottom.
From my limited knowledge It appears that the columns need adjusting, trouble is, i'm not sure how?
Im using ACAD 2011.I had to send my client an .pdf drawing.When I went to plot my drawing using the .dwg to .pdf all of my plot stlyes have dissapeared Ive been trying to get them back. How all of the styles are gone. How to return them?
View 9 Replies View RelatedOkay, so according to the practice I have to do, I need my Plot Styles from normal to Monochrome. The problem is that each layer has their own plot style Color_7, Color_34 and so on... and apparently we cant change it.
AutoCAD 13
how the AutoCAD "Pen Table" actually originated to be compliant to old-school Pen Plotters or something to that nature. The main reason is that I'm trying to write up a proposal to my superiors regarding CTB plot style issues and I'd like to get the foundation of "what" it is and "how" it came about in development and use in the AutoCAD community.
View 3 Replies View RelatedIs there a way to set the Dwg to Pdf.pc3 so that when I hit plot, it "knows" to save the pdf in the bloody folder that the source .dwg file is located....I can see how to set it to 1 single default folder in Options ( i.e. my main Clients folder) but really, how to get to to plot to the source folder..... has got to be less than 1/2 hours worth of coding....I get pretty tired of browsing/scrolling etc to where I want the pdf to end up.
View 2 Replies View RelatedMy computer crashed. Fixed it, but when I use "Cutewriter" now, it doesn't show
the different line weights.
it seems that it doesn't pick up the different weights.
am using ACAD2008 on windows XP. I have just started having this problem that if I choose to plot from a window the plot dialogue box locks up after the window is selected and the command line is still asking for the corners of the window to be selected. But everything plots ok if I use extents.
View 2 Replies View RelatedWe use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
We've got an HP Designjet 455C attached to an SBS 2003 computer.
From Autocad, I can print when I set the page size to A4 - as expect, it prints a nice A4 sized plot on the A1 width roll. But if I try to print full size plots, nothing happens; the document spools, but the printer does nothing.
It must be something to do with paper size or orientation, but I can't find what. I wondered if there was anything well known I should try (I'm not that familiar with Autocad - yet).
Part of the problem was inconsistency.. sometimes test documents would print, and then they wouldn't! I also got one which seemed to print at the right size, but was only printing part of the file content. These are existing Autocad files, with a printer that has been working in the past.
I am using the monochrome plot style and plotting to PDF. My text looks great in the Plot Preview, but once actually hit 'Plot' the line weight of my text and dimensions appears super thick and heavy. They are also assigned to the lightest line weight in the layer property manager.
View 9 Replies View RelatedTwo of our computers have windows 7 and we are unable to publish or if we plot we have to wait until that page is completed before sending another page otherwise only some the information shows up when printed (ie. no dimensions or no title block). This does not happen on the other computer in the office which still has windows XP.
View 2 Replies View RelatedAs the subject states, I am trying to apply a plotstyle to a layer. I can create the layer and apply a plot style but as soon as I create another layer with a different plotstyle, the layers I previously created lose their plot style (it appears to be removed from the drawing)
I have tried workarounds such as placing an object and applying a plotstyle then deleting that plot style and that still doesnt seem to append it to the drawing.this is my code so far:
Public Sub addPltStToLayer(ByVal id As ObjectId, ByVal pltsty As String) Dim thisDrawing As Document = Autodesk. AutoCAD. Application Services. Application.DocumentManager.MdiActiveDocument Dim thisDB As Database = thisDrawing.Database Dim trans As Transaction = thisDB. Transaction Manager.StartTransaction Using locker As DocumentLock = thisDrawing.LockDocument Dim dict
[code]...
The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines
The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light. The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights.
I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013.
We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.
I am trying to get everyone in my office to direct thier Printer Support File Path to a specific folder on our network.
I have a configuration folder, a printer description folder and a plot style table folder set up on the network. I have brought in the needed plot styles, PC3 files so on and put them in the proper folders.
This works great on my machine for publishing and printing from sheet sets and so on. But as soon as I try to direct someone else's computer to the same folder they begin to get printing errors.
Mostly, the device does not support the requested media size. Also what is the best method for setting up a Printer Support folder on a network?
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
I updated software from Civil 3D, 2011 to 2012, a while back. Recently I went back to print a drawing created in 2011 and found that the plot styles that I had made were no longer there. Is there a way to get these plot styles back? I already uninstalled C3D 2011.
View 2 Replies View RelatedI am an Autocad User for the last 16 years. It is the first time i experience a problem like this. Suddenly plot styles do not work. What ever plot style i use, the drawing (as it is showing in the plot preview) is exactly the same like using plot style "none".
I was forcing to the limits Autocad by adding raster images (like wooden floor jpgs, marble tiles jpgs etc, and Autocad crashed 2 or three times). I reopened it and continued working. The problem came up from nowhere. The one time i saw it on preview like i want it, and after last crash when i tried to see the preview, the result was as mentioned above. Till then, whatever i tried (reload pen styles, tried to other "simple" drawings, restarting PC many times (thought it was a PC memory problem) but still nothing.
I have got as far as understanding the difference between CTB and STB plot styles, and have identified I require STB, as I want to apply plot styles to individual layers as opposed to certain colours.
I have converted my drawing from CTB to STB and have set up an STB plot style to acheive what I would like. However I am unable to apply the styles held within this STB to individual layers in the layers property manager. In the plot style coloumn they are slightly greyed out, upon clicking on a layer a 'Select Plot Style' box appears which lists the "normal", "style 1" & "style 2" that I have created. However upon choosing a different style and hitting ok it doesnt apply my selection.
I am reasonably confident my STB file is setup correctly, as it is possible to apply the styles to objects using the object properties box, and for these to then be printed correctly to the style assigned.
PS - I am using AutoCAD LT 2010
I am finding that my DWF files sent to the plotter are plotting with the linework being heavier than the same file sent directly to our plotter. These are just lines that should plot with a narrow width (ie walls on a floor plan) but they seem to be about twice the width and hence look "darker". Is there a setting that I am missing or some other way to get the lines to plot out thinner? Also, TTF fonts plot thicker in DWF. I've tried the various options in the DWF viewer when sending to the plotter, but none seem to work.
View 6 Replies View RelatedI have an issue with plotting line thickness, when I use the company setup using a d-size B&W.pc3 and mono chrome.ctb files, i can't seem to get the plotter to show line thickness. But using the same setup with a customer border, I can get the line thickness.
Also I not sure if this makes a difference, but the company plots from model space and where most of our customers use paper space.