AutoCAD Civil 3D :: Parcel Settings Not Plotting Correctly In 2012
Dec 31, 2012
I either have bad settings or have found a bug in 2012 when plotting parcels.
I have a P-drain Parcel setting for major drainage areas - I set the display to the C-PROP-BNDY layer which seems to be OOB for the entire 'property'. I create the parcels from poly lines on the P-DRAIN-AREA layer.
The parcels go to the C-PROP layer. My problem is that I can't seem to get the property lines to plot. I try to set C-PROP-BNDY to the correct color, yet when I plot, the lines don't show.
View 1 Replies
ADVERTISEMENT
Aug 26, 2013
I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies
View Related
Nov 28, 2012
I'm using Civil 3D 2012. When it generates labels (alignment stationing, profile station & elevation, etc.), it keeps generating them in layer 0. It does not matter how I change the styles to the layer that I want.
It allows me to change the properties of the labels to the layer that I want after the labels have been generated. They look ok on my computer screen.
However, when I plot the plans, the labels do not follow the lineweights that the layer should be on. I think it still plotting as if it was layer 0. If I explode the labels, I can get them to plot correctly by changing the layer.
View 6 Replies
View Related
Oct 17, 2012
When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
View 4 Replies
View Related
Oct 28, 2011
I have been having this issue for a few weeks, where my contour lines will not plot in paper space, but the labels do. If I plot from model space everything shows up. All layers have been checked and nothing is frozen or turned off in the viewport.
View 3 Replies
View Related
Apr 23, 2012
When plotting profile plan sheets, there is an error in the scaling of the grids. I can not seem to figure out why the plotter is not plotting correctly. I did try creating a pdf of the plan sheet and plotting, but still have the same scale error. It starts to get off scale after about 500 feet, so the error in scale is small, but still there. It is off by about 2 or 3 feet at 500 feet on the profile grid.
View 2 Replies
View Related
Mar 23, 2012
We are currently using 2012 Civil 3D, and we have a issue with a drawing that not all the Pipes from the pipe network are displaying in the Profile, and even the pipe properties display box the lengths show up way too long and the stationing does not display correctly in this pipe properties box either.
The Big Twist is that we have 2 machines in the offices that will display the drawing correctly, in profile view and pipe properties display box has correct lengths and stationing. So we know it is not styles, etc.
Direct support has suggested we un-install all Autodesk products and reinstall them all again, we tried the repair, however this did not work. Any other way before we have to go through all this work, as we are looking a huge amount of downtime, and we do not think this is the issue. Perhaps a Civil 3D variable or Autocad variable is different?
View 6 Replies
View Related
Dec 31, 2012
I am having problems plotting out parcels and creating label settings. I think I am missing an important concept in the object and display tab of setting creation. I am not finding going through the documentation. What I have found is not well explained.
I started with the OOB alignment settings. I noted that the Basic setting has a description that states the object will take on the settings of the layer it is created on.
I noted that if I adjusted the alignment properities to "Basic". I could then move the 'roadway' alignments to P-RD-CL and the swale alignments to P-SWALE-CL. Freezing the P-SWALE-CL then turns off the swale CL's, but keeps the roadway ones on.
I am looking for a fast way to determine which styles this works for or the area of the documentation that better explains how this works.
I am starting to explore creating label styles the same way. That way I can double or triple label pipe networks such that identical styles are labeled on an E&S layer and a PCSM layer and the individual lables can be dragged on the two different sheet layouts in the same file to avoid text over writes.
View 2 Replies
View Related
Aug 23, 2012
I have a user who will be moving to a new Windows 7 computer, for which I have installed AutoCad Civil 3D 2012. They would like it so that all of their settings and preferences are copied over from their current version of AutoCad Civili 3D 2008. Currently the user has windows XP professional.
how to do this as I am unfamiliar with AutoCad.
View 2 Replies
View Related
Jan 13, 2012
Transfer styles/settings from 2012 template to 2011 template
View 4 Replies
View Related
Sep 30, 2013
In one of the xref’s there is a linetype that I’m having trouble with (actually I’m not sure if it’s the linetype or a setvar that’s the problem). The line is a polyline. Linetype generation is turned on. LTscale is set correctly. The line is set to display the linetype by layer…not entity. Line weight is set to default. It has a global width of 0.333. Here’s the problem….In the main drawing, I have a layout which has leaders in paper space pointing to the line in the xref. They are touching the line where I want them. THEN…when I print the page….the leaders are no longer pointing to the line. They (the leaders) display correctly but can’t be printed as seen. Not to a PDF, not to a printed page. See below:
What I see....
RIGHT.jpg
What I get.....
WRONG.jpg
UPDATE: It looks like the problem is with the drawing that the xref is attached to....not the xref!
View 0 Replies
View Related
Mar 15, 2012
I've just replaced all the color carts in an HP DesignJet 510 42-inch inkjet plotter. I drew some parallel lines in ACAD 2012 to test the colors, and I'm getting weird results. The most noticeable errors are: Yellow prints out at a very pale green and Blue prints at purple. Red and Cyan seem to be ok, as well as Orange... I ran a color calibration on the plotter itself and the yellow prints out a very bright, correct yellow.
View 2 Replies
View Related
Nov 27, 2012
I am using AutoCAD LT 2013 and at the moment i am just using the dwg to pdf.pc3 included in AutoCAD.
All of the text in my drawings is the same font (ISOCPAUS). Up until about a week ago, i could plot bold & italic text using the dwg to pdf plotter. Now, I cannot and i don't know what has changed to make this happen. Underlined and overlined text still plots fine to pdf. Everything appears correct in model space, paper space layouts, in previews and if i plot to any of the printers in the office, but once i plot to pdf, the bold and italic is gone.
View 9 Replies
View Related
Aug 2, 2012
I've selected a .ctb (that i've used in the past on AutoCad2010) in the page set up, but when I try to plot the colors are still colors instead of black and the lineweights are printed as assigned....
I'm still fairly new at autoCAD and feel completely stumped. the "plot with plot styles" is checked... What am I missing?
View 7 Replies
View Related
Jan 15, 2012
I need to be able to import the airfoil geometry of a NACA 2412 airfoil. I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD. What function would I use? Spline? If so how do I get it to draw all the points I have? I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.
View 9 Replies
View Related
May 23, 2011
After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies
View Related
Oct 4, 2011
My company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine. After a plot, when someone goes to save and close the drawing, AutoCAD crashes. It does not matter which plot device is used, the result is the same. This includes the plot devices included in AutoCAD. I have reinstalled autocad on one machine, no lisp commands, same result. I have already tried some of the fixes proposed in other threads, nothing has worked.
System:
Win7 64 bit
i7 930
6Gb RAM
Radeon HD 6450
View 9 Replies
View Related
Jun 18, 2012
While batch plotting to a multi page PDF in AutoCad 2012 using Adobe Acrobat:
My pages come out with a blank / empty viewport,
The title block is on the page and nothing else plots on the page.
This is only happening with one of the files I am working in. Other DWGs are PDFing normal.
View 2 Replies
View Related
Aug 30, 2012
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
View 7 Replies
View Related
Oct 3, 2012
I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies
View Related
May 27, 2013
I'm trying to import a ploting style from one of the drawing to another from my AutoCAD LT 2012.
View 3 Replies
View Related
Apr 22, 2011
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies
View Related
Apr 4, 2013
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 7 Replies
View Related
Oct 24, 2012
I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies
View Related
Apr 27, 2012
I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
View 6 Replies
View Related
Oct 21, 2013
I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
View 2 Replies
View Related
Oct 30, 2013
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies
View Related
Aug 21, 2013
2014 (COM Preferred)
Are Parcel center points available in the API?
The origin of the Area Label would be ideal.
View 8 Replies
View Related
Jan 7, 2014
What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
View 9 Replies
View Related
Aug 21, 2012
I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.
[URL]
View 1 Replies
View Related
Aug 7, 2011
Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies
View Related
