we have a drawing containing different profiles that we use for our plastic fabrication workshop, however will not print the entire profile only the beginning and end even thou is shown in the plotting preview window, we have changed all potting styles and settings trying to make it work with no luck.
View 5 RepliesThe attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedI've got a dynamic block for an irrigation spray head that I want to make annotative. My problem is that I need to spray radius (i.e. 15', 10') to stay the same, but the head symbol and text to scale with the viewport. So far I've only been able to make the entire block annotive. I've attached a of the block for refence.
View 5 Replies View RelatedThis drawing only consists of Data Connected .shp files. The polygon styles all have a different color solid fill. Transparencies are set differently for each. I thought that may have been an issue because the two layers that plot good every time are set to zero, but another layer that plots bad is also set to zero.
To give you a visual, my drawing indicates the entire state of Michigan (UP & LP) with the Great Lakes. Layout tab 1 shows the entire drawing in landscape orientation. Layout tab 2 is rotated counter-clockwise and zoomed in on the LP. Layout tab 2 is where my problem occurs. The plot indicates a chunky diagonal area through the state showing the color & line content, but the remaining area within the state is blank. Comparing two bad prints, I realized that even though the diagonal area prints on both, they have slightly different "coverage". They also plot different lines in different locations. Why would rotating the viewport cause a problem like this!?
The plot preview displays correctly though.
Plotting from the model space works fine. Why won't it work in paperspace?
I cant find solution for my polyline plotting problem, because I cant really define it, so google wont give me proper answer.
I have made object by joining polyline and part of a circle, which I turned into polyline by using pedit. But when I try to plot it to pdf it shows as slightly offset combination of elements.
Any routine that would allow you to cut out an odd shape from a solid with the profile of a polyline?The goal would be to have all the pieces that are left, not subtract them out..
View 3 Replies View RelatedJust upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
I'm having issues plotting using dwg to pdf. It prints perfect printing to my printer but when I create a pdf using dwg to pdf it does not print what is previewed.
I created block with solid hatches for my mark/schedule boxes and detail bubbles so I wouldn't have to trim whats behind it.
I have been working with a large scale architectural drawing provided by my cleint's architects. Since I usually work in black on a white screen, I have been working from paperspace with the viewport set to.monochrome. Up until Thursday, whenever I printed to PDF, I would get a monochome image which is what is supposed to happen.
However, In order to provide my client with a colour coded image, I changed some settings and printed a colour PDF. Now I cannot get it to go back to Monochrome. What setting has changed. I opened an earlier version of the same drawing and output a PDF from that drawing - black and white PDF. Try it from the current version of the drawing, it comes out in colour.
I have compared page setup settings, output setting, viewport 'MO' settings, they are all the same. How do I get back to black and white output.
I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies View RelatedAutoCAD 2013 Windows XP
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer.
In Drawing B the pdf is on 0 layer.
The 0 layer is not frozen and is set to print.
The xref in drawing B is set to overlay and relative (I tried absolute).
I can see the pdf in drawing B.
PDFrame is set to 2 in dwg A and B.
We setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
I have a large number of drawings with template details of a printer that is now longer available (we moved offices). I therefore want to write a macro that instead of trying to use the template detailed printer and then failing to the None printer instead goes straight to the new printer (Lanier MPC2500). Once I get this basic task completed I'll then add additional functionality.
The macro at present is:-
^C^C-plot;y;; \mwperdc03LANIER MPC2500;;A3 (297 x 420 mm);m;l;n;l;1:1;0.00,0.00;y;monochrome.ctb;y;n;n;n;n;y;
I also know where it's failing (the first in the path) as this is the macro escape character to enable the user to add information. If I then manually enter (or paste) the link \mwperdc03LANIER MPC2500 into the command line and press enter the rest of the macro executes and I get a print output. I've attached a screenshot of the command line for info.
I've read that instead of using the character in the path I should use the /. I've tried this but it doesn't seem to work.
Is there another method of embedding paths into Autocad LT so this will operate or a better workaround?
I'd thought of using DIESEL but I can't see any suitable commands in the command library.
>>>>>Why did they choose a as and escape character?????
I have multiple drawings I've been working on that have tif files laid in the background that I have been making my drawings over the top of. In order to make the linework easier to see, both on screen and on plot, I applied a 65% transparency to the layer containing the tif. Everything worked fine, and printing worked great, but when I tried to plot them to pdf, the transparency failed to plot properly. I tried PrimoPDF and the transparency worked, but the paper sizes didn't include Arch D and the plot didn't look as crisp as the one produced by AutoCAD. In the end, I ended up pay $5 per print to have the DWG files processed, because I needed the transparency to plot properly. I would like to figure out what the problem was so that next time I need to send out for prints.
View 2 Replies View RelatedI'm having a problem plotting to pdf (using ScanSoft Pdf Pro 4) causing Autocad Civil 3d: Infrastructure Design Suite.
When I plot in Civil 3d 2009 I have no problems but we recently switched to Autocad Civil 3d: Infrastructure Design Suite and when I try to plot a pdf 24x36 it looks correct in the plot preview but my final pdf size comes out 36x36. I have tried everything I know...
Create a new sheet size
I can't just save as an earlier version and plot in C3d 2009 because my alignments gets screwy.
I have imported a dwg witch was created by Revit. The problem is that it creates polyline vertex for curves. But i want a arc, or at least not so many segments.
on the image; on the left is what i got, on the right is what i want.
I'm drawing a polyline with a width of 5". In previous versions, the pline would always appear solid. Now it appears clear. I want it to appear solid. If this is editable in the pline properties, or if it's something you turn on after you pick the first point, much like typing 'W' to enter the width?
View 4 Replies View Relatedhow to get the area of this polyline .........
i used properties command >>>
i used li command >>>
i used area then o command >>>> it says that area = 362.5350 ok this is wrong ..
i calculate the area of the polyline by separating it to parts then subtract the area >>> 368.62 - 7.79 = 360.83 this is the correct area
actually this is to hard to separate polyline to parts, when i have alot of polyline.
i guess this problem causes, when you have self-intersecting polylines the file is attached ..
I'm working on a project that a coworker already started but he drew walls as 200mm thick polylines and he wants them changed to be two lines set 200mm offset of each other. He thinks there is an easy command to do this.
View 3 Replies View RelatedRunning AutoCAD 2013 on Windows 7 64-bit OS Dell desktop.Whenever I plot 1 in 4 of the times, AutoCAD freezes, usually crashing. Happens both when either typing the command or using pulldown option.Freezes before I get a chance to choose which printer/plotter but plotting with HP Designjet T1120.
I am assuming downloading the HP Universal driver wouldn't do me any good. I am not crashing after I send anything to plot, but before, immediately after the 'Plot' window comes up, it freezes.
An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
View 4 Replies View Relatedwhen i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
I have created some rectangles with a solid fill hatch in paper space in different colors, on different layers., when i plot them, they plot in black. what can i have checked or not checked to solve this? the viewport that i have in the layout plots in color, i am using the acad plot style.
View 9 Replies View RelatedI have a strange thing going on where image frames show up when I plot to PDF. I have set the image frame variable to 2. There is no issue when using a local printer or using print preview for said printer. When plotting or previewing using any of the PDF drivers image frames appear around my title block logos.
View 1 Replies View RelatedI've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
creating measurable PDFs from Autocad plots?
How do I get rid of them???
View 9 Replies View RelatedI am using autocad 2013 on Mac and plotting to hp designjet 510. Lines are always missing when I print especially medium to thin lines or hidden lines or for example hatch tile lines. I use the plotter also on a pc and there are no problems at all. I changed the thickness of my lines in ctb and still have lines missing. I change percision to 1 and same thing. If I print draft, normal or best I still have problems. I know how to spool and use in built memory on pc but can not find something similar on the mac and dont know if that will work, as i printed same drawings from pc. It seems that when there are close lines together or dense lines in an area, it just skips them.
View 9 Replies View RelatedI am trying to plot a drawing with 80% transparency on the xref layers, and use a pen table to assign line thinkness (printing in black and white). But, when I go to print, AutoCAD completely ignores both of these and prints the drawing all lines at the same intensity and thickness.
View 2 Replies View RelatedI've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
I am not sure how to change this, but I am adding polylines and they are coming in with a "Thickness" of 4" in the properties palette (7th option in General area of properties). The Global width is set to 0 and it shows correctly in a 2d plan view, but a 4" thickness if I do a 3dorbit.
View 4 Replies View Related