AutoCAD 2013 :: Plotting To PDF With Correct Scale
Mar 13, 2013
I've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
creating measurable PDFs from Autocad plots?
View 4 Replies
ADVERTISEMENT
Jan 25, 2011
I am putting together a catalog with some drawings from AC 2010. I am drawing in model space and printing in paper space. The view port scale is 1:1. If I print directly from Autocad to the printer, everything is fine. If I first plot to PDF from Autocad and then print, the dimensions are off by about 1/8". The dimensions read correctly, but they do not measure correctly. The paper size is 8 1/2 x 11. I would like these PDF files to be accurate in case someone needs to print them.
I have tried saving to dwf and then printing and printing out of Design Review but it doesn't make any difference. My settings in Adobe are 1:1 as far as I can tell.
View 9 Replies
View Related
Nov 22, 2013
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
View 3 Replies
View Related
Sep 25, 2012
when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
View 9 Replies
View Related
May 25, 2011
I'm trying to convert a hand drawn paper plan of our house into Autocad so that I can tweak it. I'm not bad at drawing things in autocad, but how to set it up properly for the file to be printed out in a shop on A0 at the correct scale. Either some info on how to set it up, or a template file that is already setup would be great.
View 9 Replies
View Related
Apr 12, 2011
I have a drawing and when I measure the width of a window it says 30.9, when it is supposed to be 1100mm. Is it possible to change the scale so that the measurement is correct?
View 8 Replies
View Related
Dec 27, 2013
I am still confused when it comes to My units and plotting to scale. If I want my drawing at 1/8" scale what would I set my units to and what would I set my scale to when plotting?
View 2 Replies
View Related
Mar 4, 2013
I am having an issue inserting a detail call out "block". The blocks were created to be annotative however, when I am inserting them into my paperspace at 1" = 30' it shrinks up the block. In model space it shows at the correct size.
View 2 Replies
View Related
Dec 1, 2013
I have downloaded JPG2000 files from the National Map. I can insert the image, but it doesn't recognize where it is supposed to be.
[URL]......
I'm using Civil 3D, 2013 on a 32 bit machine.
View 9 Replies
View Related
Jul 31, 2012
I have the DWG file with a row of parts. I need to take each part geometry and insert in separate IPT sketch.
As result in the IPT I have multiplied for 25.4 geometry.
View 3 Replies
View Related
Apr 15, 2013
I downloaded a block of a plan view of a wheelchair user so I can see just how much space there is available.
The block is dimensioned but when I insert it and measure its dimensions, the readings are different. For example, a dimension reads 1070mm but when I measure it, I get 1023mm. Not far out but when I measure a 150mm dimension, I get 83mm. A 460mm dimension is measured as 536mm.
INSUNITS = 0
View 4 Replies
View Related
Mar 16, 2012
IN this drawing, I want the 9.00 to be either 4 ( feet) or 48 (inches).
How do I set the correct scale in this or any drawing?
View 3 Replies
View Related
Apr 2, 2011
I have drawn a 2D 'ruler' 250 units by 50 units and drawn 10mm marks along the edge of the ruler with the last section divided into 1mm marks.
When I plot the drawing, setting the scale in the properties box to 1:1 or 1:2 (or whatever scale I choose) then selecting File, Plot etc, (leaving the scale in the 'Plot Scale' section of the dialog box as shown - normally 1:1) the resulting plot is slightly smaller than expected. What should be say 200mm is more like 199 mm.
I am using AutoCad 2007 and a local domestic type printer (HP type) connected via a USB line.
View 8 Replies
View Related
Apr 15, 2011
I am attempting to plot a site plan for a large single family home property (2 lots at 200'x329') to an ARCH D (24x36) sheet and have set up the paper space and a title block template to fit this. I set up a new viewport inside the tile block template to take up all the open space inside it.
Our professor provided us the survey from which we're doing our drawings and has asked for us to plot in 1:20 scale(1"=20'), so I have input 1:240 (1" = 240") in the layout scale menu. The site plan to be plotted fits, but much too small to be acceptable. It takes up only maybe a third of the viewport, when it should fill the viewport (the sheet) for the most part.
View 1 Replies
View Related
Sep 17, 2012
So I create a block on layer 0 and then create the block as a 1 inch by 1 inch block so it is easy to scale up to the size I need but when I try to insert the block at the scale I need it wont resize it to the correct scale. It stays at the 1 inch by 1 inch original block.
View 1 Replies
View Related
Aug 9, 2011
My drawing inb model space looks fine, however when I try to set it up to plot in paper space, via the properties box with the "correct scale factor" and the drawing becomes very large. The only scale I can get the drawing to plot at is "fit to page", which is no scale. I have tried to set the scale on the "page setup" and the same thing happens.
View 5 Replies
View Related
Aug 21, 2012
I'm trying to plot a simple site plan to PDF through the DWG to PDF.pc3 option.
The scale in my model space is 1-1 and in my viewport in paper space 1-200.
The issue is I plot to PDF, and then the scale is way out. For example an object that should be 10,000mm long in model space appears as 59mm (11,800mm scaled) on the PDF. And of course when I print from the PDF to a printer this scale error carries over.
View 4 Replies
View Related
Oct 16, 2011
First, when I have a drawing to scale in millimeters and want to put its attributes, the amnotations come out extremely small. It's caused me so many headaches. the units have been set to millimeters, limits from 0,0 to 200-150 ish. Drawing a small drawing within those limits tried very, very small annotations that you can't see unless you zoom 200 times in. I don't have that problem when drawing in inches though. Annotations come out great in inches.
The second problem is that, after I complete a drawing in millimeters and I want to copy and paste it onto my template (also drawn in millimeters to fit a 12-9 paper) the drawing comes out HUGE. At least 100 times bigger than the 1:1 scale should be. When I draw and plot in inches, the 1:1 copy onto a template comes out perfect, but for some reason it always does that in millimeters. I tried placing a block over the template with the "model" to scale and that looks closest to the proper 1:1 scale. I double checked on both the drawing and the template that their 1:1, they seemed fine so I printed. When I measured with a ruler it was still off by a bit.
What I can do to make annotating and plotting in millimeters as easy as with inches?
View 9 Replies
View Related
Apr 13, 2012
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
View 9 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
Apr 19, 2013
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
View 1 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Apr 10, 2013
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
View 4 Replies
View Related
Sep 20, 2013
I am current CC subscriber and love all the different programs and the capabilities that come along with it. How to scale my artwork. For example, I have designed my business logo at 220 x 220 pixels. When I export it as a jpeg file to upload into my SharePoint team site and resize it, the quality diminishes considerably. Sharepoint recommends uploading a picture that is approximately 60 x 60 pixels. how do I take my 220 x 220 artwork and make it so that when I export it, it is 60 x 60 pixels?
View 2 Replies
View Related
Sep 27, 2013
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
View 6 Replies
View Related
Aug 9, 2012
I'm having issues plotting using dwg to pdf. It prints perfect printing to my printer but when I create a pdf using dwg to pdf it does not print what is previewed.
I created block with solid hatches for my mark/schedule boxes and detail bubbles so I wouldn't have to trim whats behind it.
View 9 Replies
View Related
Oct 5, 2013
I have been working with a large scale architectural drawing provided by my cleint's architects. Since I usually work in black on a white screen, I have been working from paperspace with the viewport set to.monochrome. Up until Thursday, whenever I printed to PDF, I would get a monochome image which is what is supposed to happen.
However, In order to provide my client with a colour coded image, I changed some settings and printed a colour PDF. Now I cannot get it to go back to Monochrome. What setting has changed. I opened an earlier version of the same drawing and output a PDF from that drawing - black and white PDF. Try it from the current version of the drawing, it comes out in colour.
I have compared page setup settings, output setting, viewport 'MO' settings, they are all the same. How do I get back to black and white output.
View 4 Replies
View Related
Dec 28, 2012
My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies
View Related
Jan 30, 2013
I want to share toolpalettes for multi-users in a network.
i create a share-folder with full-write-and-read-status for the cad-admin. then i added the folder into the _toolpalettepath-definition in the acad-options. all other users only have only-read-status for this folder.
this folder will be define in the first position of this list.
in theorie this will work - but now a costumer test this configuration. the problem is, that texts and seperator-lines in the paletten-defintion change the order - like example.
In other postings i read the name *.aws-files - but i did not understand the meaning of this file.
View 3 Replies
View Related
Apr 2, 2013
I wish to import from a TOPCON file. The points are from a GPS unit and are in standard form (easting, northing and elevation). I have been able in import the points into AutoCAD, and although they are in the correct location relative to each other, their geographical information has been altered (ie, the old coordinates are lost, and any measurements between points are now completely inaccurate).
I am working in metric units, and I think the problem may be that when I import the block, it comes in with 'block units' in inches. I cannot see how to change this. I also cannot select 'locate using geographical information' when I insert the block, which I think may be important in preserving geographical information.
View 3 Replies
View Related
May 24, 2013
I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies
View Related
