AutoCAD 2013 :: Viewport Scale List - Zooms With Each Scale
Sep 6, 2013AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: Modify DEFAULT SCALE LIST To Show Metric Scale List In Imperial Template
May 2, 2012Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedAutoCAD LT :: Viewport Scale List
Jan 12, 2012recently upgraded to a new stand alone LT 2012 on brand new machine.I only work in metric millimeters. When I open a new drawing and set up a viewport on a new layout tab the viewport scale list is as one would expect i.e. 1:1 1:2 1:4 1:5 1:10 1:25 1:50 etc etc
when I open an existing drawing I only have the option of imperial scales i.e. fractions. I have tried simply adding the most commonly used scales to the list but once the drawing is saved and closed, they have disappear when reopened.
AutoCad 2D :: Viewport Scale List
Jul 29, 2013I have tried to find if my problems has already been addressed but cannot find any reference.I am adding a value to the scale list in 2012. The list goes from 1:20 to 1:30 and I want 1:25.
When I add in the drawing it is still there in subsequent edits. When I create or edit another drawing the value is not in the list!!
Is the viewport scale list default needing to be edited elsewhere for it to become a global change because no matter what I try it only stays resident in drawings I edit the viewport scale list!
AutoCAD Civil 3D :: Label Styles Annotation Scale Versus Viewport Scale?
Jun 26, 2009am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
AutoCAD Architecture :: Synchronize Annotation Scale To Viewport Scale?
Mar 29, 2011I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
AutoCAD Civil 3D :: Making Annotative Scale Different From Viewport Scale
Nov 8, 2013I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
AutoCad :: Unable To Edit Unlocked Layers / How To Change Default Viewport Scale List
Jun 8, 2011I just started using 2012. Two problems:
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
AutoCAD Visual LISP / AutoLISP :: Quicker Alternative Changing Annotative Scale In Object Scale List
Apr 10, 2013I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies View RelatedAutoCAD 2010 :: Imperial Scale Not On Scale List
Feb 7, 2013My scale list has metric list on it as it suppose to have both metric and imperial scale.
Screen shot..
AutoCAD 2013 :: Scale A Viewport With Different X And Y Values?
Aug 13, 2013Is it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies View RelatedAutoCAD 2013 :: Viewport In Layout Won't Change Scale
Aug 22, 2013I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View RelatedAutoCAD 2013 :: Metric Viewport Scale Factors?
Feb 22, 2013I am trying to organize 7 viewports in paperspace. My drawing is a metric drawing, and when I set a scale to one view port (for example 1:25) then double click into another viewport, the viewport that I origanly set at 1:25 vooms out to fit all contents in model space.
View 2 Replies View RelatedAutoCAD 2013 :: 2013 Viewport Scale Control?
Dec 28, 2012My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedAutoCAD 2013 :: Plot / Annotation And Viewport Scale Correlation
Feb 25, 2013Plot scale / Annotation scale / Viewport scale
I couldn’t figure out how these three types of scales are correlated with one another. For example, my drawing unit in AutoCAD is meter. And thus if I need to print my drawing with a scale of 1:200 then I set the annotation scale to be 1:2viewport scale to be 1:2plot scale 100:1000
if I need to print my drawing with a scale of 1:20 then I set the annotation scale to be 5:1viewport scale to be 5:1plot scale 100:1000
I couldn’t derive the rule that controls these three types of scales. This is also quite confusing when working with C3D! Sounds not the same logic is applied.
AutoCAD 2013 :: Dimension Update To Viewport Scale Factor
Mar 5, 2013When some off our users move the dimensions in paperspace or the drawing in modelspace,
only some off the dimensions would see the viewports scale factor, and multiply itself by that, from my knowledge this happens when you uses the power dimensioning in Mechanical, and the the annotative tick box is selected, but for some reason one particular user he uses normal annotations when dimensioning, where there is no annotative functionally but the dimension still behave as mentioned.
Product design suite standard 2013
AutoCAD 2013 :: How To Create A Viewport With Different Horizontal And Vertical Scale
Jan 29, 2013Is it possible to create a viewport with a different horizontal and vertical scale? I want to create a horizontal scale of 1"=40'-0" and a vertical scale of 1/4"=1'-0". Is this possible?
View 2 Replies View RelatedAutoCAD Civil 3D :: 2013 Scale List In Registry
Jan 28, 2013Having trouble finding the correct place to put the FEET, INCHES, METRIC, custom scales in the registry. I'm not sure if its any of the following or is it somewhere else now?
[HKEY_LOCAL_MACHINESOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_LOCAL_MACHINESoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
[HKEY_CURRENT_USERSOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
AutoCAD 2013 :: Default Scale List Location?
Jul 17, 2013direction of where the DEFAULT SCALE LIST is stored in the C: drive?
I have set it up in the option tab and all is working, but will soon be installing several new PC's with AC and want to drop the stored file straight into the new PC's rather than having to type them out one by one on each PC.
AutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored
Apr 13, 2012I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD 2013 :: Block To Scale Based On Plot Scale?
Apr 19, 2013I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD 2013 :: Change Global Scale Factor Or Current Object Scale In Specific Paper Space
Apr 10, 2013I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
AutoCAD 2013 :: How To Scale The Layout View And Remain The Viewport View
May 16, 2012i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedAutoCAD 2013 :: Annotation Scale Option Is Displayed Only In Model And Viewport Mode But Not In Layout Mode
Mar 14, 2013“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
AutoCad 2D :: Viewport Scale To Be 1 To 25
Mar 17, 2011When I scale a viewport, I normally type in the scale I want into the Viewports toolbar. So if I want the viewport to be 1 to 25, I type in "1:25". I have done this for years. Now all of a sudden, I have started a brand new drawing, setup the company border as A1. Then typed in "1:25" into the toolbar, and it zooms RIGHT in so you cannot see the drawing. But when I use the old fashioned command:
zoom - scale - 1/25xp
It works perfect. Why this is happening with the toolbar?
AutoCad :: How To Set The Scale Of Viewport
Apr 27, 2010I have just installed Autocad Architectural 2011 (64Bit) on my computer, since my laptop was struggeling with running autocad 2009.
I have opened a 3d model of my building (created in the 2009V) in Cad 2011, played around a little bit and am now at the point of having to create some viewports to plot elevations etc. But now i am stuck, i have created a viewport, selected it and can't figure out how to set the scale. I saw there was a 'button' (that is not working?) on the bottom, saying 'Vieport Scale', i can't click on it to change the scale, so i went to properties. When i select 1/100 Standard Scale, it automatically goes back to Custom Scale and sets it to 0.005. Basically nothing happens! The only way it changes the scale is when i double click on the viewport and zoom in/out on my building. But that can't be the only way to do it?!
I have got a deadline coming up, and really can't work on my laptop again as it keeps overheating and crashing on me! How to set the scale of my viewport and actually get it to do it?
AutoCAD Civil 3D :: Viewport Scale Changes
Apr 26, 2013In c3d 2013 in the layout tabs when I hover over the annotation scale for the viewport it automatically changes the viewport like a "preview" of that scale. Is there a way to shut that off?
I ask because I believe it is altering my annotative point descriptions so I have to regen everytime my scale changes to see if the scale will work or not. A co-workers computer doesn't seem to preview and it works fine on their computer my preview appears to mess the annotation up on mine.
AutoCAD 2010 :: Dim Scale Per Viewport?
Apr 6, 2011i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Set Scale In Viewport
Apr 30, 2013I double click in the viewport; under misc the annotated scale is in the list but not the standard scale. I want to set the scale for the viewport. Why doesn't the standard scale show as on option? Or, how to I set the scale in my viewport?
I'm using autocad LT 2008