I have multiple drawings I've been working on that have tif files laid in the background that I have been making my drawings over the top of. In order to make the linework easier to see, both on screen and on plot, I applied a 65% transparency to the layer containing the tif. Everything worked fine, and printing worked great, but when I tried to plot them to pdf, the transparency failed to plot properly. I tried PrimoPDF and the transparency worked, but the paper sizes didn't include Arch D and the plot didn't look as crisp as the one produced by AutoCAD. In the end, I ended up pay $5 per print to have the DWG files processed, because I needed the transparency to plot properly. I would like to figure out what the problem was so that next time I need to send out for prints.
I am trying to plot a drawing with 80% transparency on the xref layers, and use a pen table to assign line thinkness (printing in black and white). But, when I go to print, AutoCAD completely ignores both of these and prints the drawing all lines at the same intensity and thickness.
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
With a new HP T 7100 Plotter I can not plot bigger sizes than A0 with transparencies. Installed is the HP-GL2 and the PS Plotterdriver. I can plot from AutoCAD normal plans till a sizeformat of A0 with trasnsparencies, but with oversizes there is no plot. Plans without Transparencies can be plottet and I can plot from other programs all plans even with Transparencies. As a landscape architect I want to use the transparency on bigger plans.
I'm having issues plotting using dwg to pdf. It prints perfect printing to my printer but when I create a pdf using dwg to pdf it does not print what is previewed.
I created block with solid hatches for my mark/schedule boxes and detail bubbles so I wouldn't have to trim whats behind it.
I have been working with a large scale architectural drawing provided by my cleint's architects. Since I usually work in black on a white screen, I have been working from paperspace with the viewport set to.monochrome. Up until Thursday, whenever I printed to PDF, I would get a monochome image which is what is supposed to happen.
However, In order to provide my client with a colour coded image, I changed some settings and printed a colour PDF. Now I cannot get it to go back to Monochrome. What setting has changed. I opened an earlier version of the same drawing and output a PDF from that drawing - black and white PDF. Try it from the current version of the drawing, it comes out in colour.
I have compared page setup settings, output setting, viewport 'MO' settings, they are all the same. How do I get back to black and white output.
I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer. In Drawing B the pdf is on 0 layer. The 0 layer is not frozen and is set to print. The xref in drawing B is set to overlay and relative (I tried absolute). I can see the pdf in drawing B. PDFrame is set to 2 in dwg A and B.
We setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
I have a large number of drawings with template details of a printer that is now longer available (we moved offices). I therefore want to write a macro that instead of trying to use the template detailed printer and then failing to the None printer instead goes straight to the new printer (Lanier MPC2500). Once I get this basic task completed I'll then add additional functionality.
The macro at present is:-
^C^C-plot;y;; \mwperdc03LANIER MPC2500;;A3 (297 x 420 mm);m;l;n;l;1:1;0.00,0.00;y;monochrome.ctb;y;n;n;n;n;y;
I also know where it's failing (the first in the path) as this is the macro escape character to enable the user to add information. If I then manually enter (or paste) the link \mwperdc03LANIER MPC2500 into the command line and press enter the rest of the macro executes and I get a print output. I've attached a screenshot of the command line for info.
I've read that instead of using the character in the path I should use the /. I've tried this but it doesn't seem to work.
Is there another method of embedding paths into Autocad LT so this will operate or a better workaround?
I'd thought of using DIESEL but I can't see any suitable commands in the command library.
>>>>>Why did they choose a as and escape character?????
I'm having a problem plotting to pdf (using ScanSoft Pdf Pro 4) causing Autocad Civil 3d: Infrastructure Design Suite.
When I plot in Civil 3d 2009 I have no problems but we recently switched to Autocad Civil 3d: Infrastructure Design Suite and when I try to plot a pdf 24x36 it looks correct in the plot preview but my final pdf size comes out 36x36. I have tried everything I know...
Create a new sheet size
I can't just save as an earlier version and plot in C3d 2009 because my alignments gets screwy.
Running AutoCAD 2013 on Windows 7 64-bit OS Dell desktop.Whenever I plot 1 in 4 of the times, AutoCAD freezes, usually crashing. Happens both when either typing the command or using pulldown option.Freezes before I get a chance to choose which printer/plotter but plotting with HP Designjet T1120.
I am assuming downloading the HP Universal driver wouldn't do me any good. I am not crashing after I send anything to plot, but before, immediately after the 'Plot' window comes up, it freezes.
An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
I have created some rectangles with a solid fill hatch in paper space in different colors, on different layers., when i plot them, they plot in black. what can i have checked or not checked to solve this? the viewport that i have in the layout plots in color, i am using the acad plot style.
I have a strange thing going on where image frames show up when I plot to PDF. I have set the image frame variable to 2. There is no issue when using a local printer or using print preview for said printer. When plotting or previewing using any of the PDF drivers image frames appear around my title block logos.
I've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
I am using autocad 2013 on Mac and plotting to hp designjet 510. Lines are always missing when I print especially medium to thin lines or hidden lines or for example hatch tile lines. I use the plotter also on a pc and there are no problems at all. I changed the thickness of my lines in ctb and still have lines missing. I change percision to 1 and same thing. If I print draft, normal or best I still have problems. I know how to spool and use in built memory on pc but can not find something similar on the mac and dont know if that will work, as i printed same drawings from pc. It seems that when there are close lines together or dense lines in an area, it just skips them.
I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
I am currently making a 3d tower and the outside of the tower is glass, but when i apply the colored glass i want you can see the whole way through the tower. That isn't what it looks like in real life.
I tried adjusting the transparency of the material and the glass is still see through. I then changed it to a solid glass but then i couldn't get the color that i want and it doesn't look realistic. i tried messing with the opacity, again that had no effect. i am using AutoCad 2013.
I am running AutoCAD 2013. My issue is that the top row of icons (New, Open, Save, etc. and all of the Autodesk 360 info) have become nearly invisible. If I hover the cursor over the icon it tells me what it is and I know I am clicking in the correct area. I think it was some sort of background transparency issue, but can't remember where to reset that to opaque.
I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
I have attached my template drawing and a plotted pdf file of my template.
My question is the logos in the title block are hand drawn dwg logos. My client does not like the pdf file because the ITC logo text changes color and looks grainy or washed out. It is not crisp and clean. This is VERY IMPORTANT to him. Why do they change so as in the colors of the ITC logo change to a light blue not the 178 I set it at in AutoCad. when I plot a pdf the file. When plotting I use the DWG to PDF option.
we have a drawing containing different profiles that we use for our plastic fabrication workshop, however will not print the entire profile only the beginning and end even thou is shown in the plotting preview window, we have changed all potting styles and settings trying to make it work with no luck.
I made a 24 x 36 title block with attributes and saved it as a wblock.
1) When I inserted the title block into a 24 x 36 paper space, The titleblock does not fit. and the texts are messed up as well. The text are in in their respective places. What I did to create the title block is to basically created a title block border and then created the text. So, I made a block out of the borders and then a block out of the text then I made a block out of the whole thing (text and border). After i saved it as a wblock. When saving as wblock i chose entire drawing and once i chose object.
2) When I try to test plotting with this title block i made (even though it does not fit in) it does not show up in print preview.
How do I make some of the text Bold and others not? but keep them all same style?
I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD. On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
have xrefs in drawing froze some of the xref layers, changed colors on some others looks great on screen, but all the original colors show on plot, along with the frozen layers...is this to do with the xref?
Plotting from the Layout - Model is plotting fine, XREF Titleblock is plotting out too light, about 20% of what model plots.
XREFd on 0 layer (tried on different layer, result = no difference) all other aspects of plot are correct
XDWGFADECTL set at 1
LAYLOCKFADECTL set at 1
Print Preferences
- line and text (not photo)
- dpi 600
I found a work-around but it isn't realistic in the longterm, I inserted the Title block as a BLOCK and exploded it, and then the titleblock plotted fine with each of the different Title Block layers plotting correct to pen width.
