AutoCAD 2013 :: More Than 10 XREF Not Loading?
Jan 29, 2013
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
View 1 Replies
ADVERTISEMENT
Jun 11, 2013
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
View 1 Replies
View Related
Feb 20, 2013
I am having a issue when I open a drawing with a profile or a surface xreferenced into it, the profile drawing or the surface drawing needs to be reloaded every time in order for it to appear. This becomes very cumbersome when we try to publish a set and have numerous plan and profile sheets and then the profile doesn’t appear. We have six identical machines in our office with Civil 3D 2013 on them and out of the six two of them have this happen on a regular basis. If I were to go over to the other four machines, there are no issues when we open the drawing or publishing. Is there a setting in AutoCAD that we are overlooking?
View 2 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Feb 19, 2013
Xref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies
View Related
Mar 25, 2013
The original model, in shade visual style, all objects are distinct and separate objects as they should be. However, when an xref is loaded (overlay) the model (display) jumps and the objects that were distinct now appear mingled together. Also, when you hover over an object it's highlight outline does not align with the object, it is offset from it approximately the amount of the display jump. I compared display and visual style settings from other model drawings that did not have this problem but came up with nothing that worked. More than one model drawing on this particular project created by another discipline has this problem, whereas on a previous project models by another discipline never had this problem and neither do models created within my dicipline.
View 0 Replies
View Related
Mar 13, 2011
"xref object blow up max on loading scene" thats all I can add only into the scene I have a CAT rig, some cylinders with skin,cloth,ffd modyficators. After importing and xref object i close max. Then, when I am trying to open max with xrefobject i get an error. I unchecked the "automatic update" option, with to effect- still max cant open the scene and gimme an error.
View 3 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
May 29, 2012
I have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
View 3 Replies
View Related
Apr 23, 2013
I recently downloaded the student version of Inventor Professional 2013 (64-bit). I made some parts and ran some stress analysis simulations on the parts. I restarted Inventor after running a simulation and upon the reopen, none of the add-ins on the Environments tab were there and the Add-Ins manager does not open. I tried uninstalling and reinstalling the entire program, even tried installing different model years of Inventor; none of the versions load the add-ins and the add-in manager fails to load.
View 9 Replies
View Related
Nov 15, 2012
I have been using AutoCAD Architecture 2013 imperial for weeks. Then the other day I went to use it again and the program would not finish loading. The metric version that comes with the program does open.
View 5 Replies
View Related
Dec 10, 2012
when trying to load our custom menu i get the following error.
Write permission denied. Unable to create C:program files Autocad 2013SWRMenuSWR.cruix.
View 5 Replies
View Related
Apr 29, 2012
While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies
View Related
Nov 22, 2013
working with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
View 1 Replies
View Related
May 16, 2013
Initially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
View 1 Replies
View Related
Jul 17, 2013
AutoCAD 2014 isn't loading lisp routines when put in the start up suite.
They are loaded from a trusted location.
View 5 Replies
View Related
Jan 3, 2013
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
View 7 Replies
View Related
Apr 15, 2013
We use scripts a fair bit in acadLT & from the Desktop icon. The 2014 behavior has changed in that it displays a warning (screengrab attached) before allowing the script to load.
This is going to be a pain for users. I can't see a way to add a folder as a trusted source in LT.
View 9 Replies
View Related
Jan 9, 2014
I'm using AutoCad 2013 Civil 3D. I'm trying to import the attribute table from a GIS shapefile into AutoCAD. I tried it in Map but could not get it to work. I could not find and object file in creating a quirey.
View 2 Replies
View Related
Nov 15, 2013
I am having trouble when I import XRef’s and the scaling of lines. When the drawings are importing the hidden lines do not show up as hidden lines. I know this might be a scaling issue but I do not know how to correct this. The XRef drawing is drawn at a scale of 1-1/2”=1’-0” and set to print on a letter size paper but the drawing which it is imported to is set to be printed on a 11x17 but the viewport is still at the 1-1/2” scale and the lines are shown as continuous.
View 6 Replies
View Related
Oct 30, 2013
I have a drawing that I cannot detach the Xref. It's not making sense.
When I try to detach the Xref I get a message saying
"Xref xxxxx.dwg has multiple references. Not detached"
I've attached a screenshot of what I'm seeing.
View 2 Replies
View Related
May 9, 2012
AutoCAD 2013 Windows XP
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer.
In Drawing B the pdf is on 0 layer.
The 0 layer is not frozen and is set to print.
The xref in drawing B is set to overlay and relative (I tried absolute).
I can see the pdf in drawing B.
PDFrame is set to 2 in dwg A and B.
View 4 Replies
View Related
Sep 27, 2012
I know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
View 1 Replies
View Related
May 24, 2013
So we have a frustrating porblem.
When we have a clipped XREF the boundaries are selectable as well as the insertion point.
We want to be able to lock the xref inplace and make it not selectable?
View 4 Replies
View Related
Dec 7, 2012
I have made a plug-In for AutoCAD 2013 which reads the x-Ref from a DWG File.
However, I wants to read this xRef Details (with parent child tree information), from an Console or Windows Based Application. i.e. without loading DWG in AutoCAD, Is it possible to directly read the xRef details?
View 1 Replies
View Related
Nov 8, 2013
Points began showing up in my xref'd file. When I click them, they select the xref, so they are objects and not artifacts. I can XLIST the points in the xref and turn on/off those layers but in the base file, these points do not exist anywhere.
This is the only article I could find on the mystery dots: [URL]
I tried the solution to COPYBASE, delete all, and purge, but they persist. It is happening on at least two layers.
View 4 Replies
View Related
May 29, 2012
I have a Mechanical drawing with numerous Xrefs. I need to make changes to the Plumbing layers which is in O-Xref layer. I have tried to bind all Xrefs but cannot bind all of them. The piping is in the O-Xref layer. I cannot explode nor can I Xref-Edit anything in this layer. This is one of a number of drawings but this is the first one that I cannot explode or edit the layer and I have never run into this problem before.
Is there a way that the file can be locked up to prevent editing?
View 1 Replies
View Related
Sep 5, 2013
I can use xrefs on different project but right now on autocaddLT 2014 it doesn't work.
View 9 Replies
View Related
Nov 7, 2013
Updating the attached dwg (Xref),The file Q1 is attached to the file Q5 (attached). Edits are applied to the Q1. These edits are not transferred to the Q5 despite the fact that the “regenerate” button is pressed.
What might be the issue here? How the edits on the Xref files are reflected directly to where they are attached?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Apr 29, 2013
When I import a drawing using XREF command from one file to the new file the scaling between model space becomes all messed up. making the adjustments between the two?
View 7 Replies
View Related
Apr 14, 2013
My Xref attachments are not visible. Do you know what can be the reason?
View 3 Replies
View Related
