AutoCAD Inventor :: Add-Ins Not Loading In Professional 2013
Apr 23, 2013
I recently downloaded the student version of Inventor Professional 2013 (64-bit). I made some parts and ran some stress analysis simulations on the parts. I restarted Inventor after running a simulation and upon the reopen, none of the add-ins on the Environments tab were there and the Add-Ins manager does not open. I tried uninstalling and reinstalling the entire program, even tried installing different model years of Inventor; none of the versions load the add-ins and the add-in manager fails to load.
View 9 Replies
ADVERTISEMENT
Jul 5, 2012
I need to draw a cylindrical cam in Inventor Professional 2013. I tried using the cam module but it is not what I need. My cam can be generated by a third-degree polynomial. You could use the new "curve from equation"?
View 1 Replies
View Related
Nov 12, 2013
Is there a service pack in the pipeline that will allow Inventor 2013 to run on Windows 8.1? It was working fine on 8 but crashes on the loading screen now Ive upgraded to 8.1. Upgrading to 2014 is not an option for me as my professor uses 2013 software and he will not be able to open 2014 files.
View 1 Replies
View Related
Aug 29, 2013
At work we have recently upgraded to Inventor 2013 Pro, Although Inventor isnt the most widely used program in the company so its hard to find time to do some set up and get it going smooth. My problem is that i am working on a large process plant all done in inventor and the file is quite large. It takes along time to load and is really laggy when inside the model. Now the model is based in my local office's server my question is if i was using Vault would it keep a local copy on my C:// rather than trying to refresh all parts from ther server. If it is a matter that when working with large files using Vault is the better option than i will need to take some advantages
View 3 Replies
View Related
Mar 16, 2013
I think that something is not the way it is suppose to be at my ribbon I have a Inventor Studio icon but by defaults is not active (it's grayed out) so in order to turn it on I have to go to add ins and turn Inventor Studio off and than on again and in that way I am able to activate the Inventor Studio button but after that all the buttons in the Rendering Studio tab are inactive so I cannot use them. And I cannot figure out where is the problem. Is it because I am using the student version of the software and it has some kind of limitations on the rendering engine, or it is some kind of malfunctioning of my installation. Everything else is working normally I can modell I can do a rey tracing viewport renders but I cannot run the studio environment interface.
View 5 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
May 2, 2013
I had a copy of Inventor 2013; It worked well up untilrecently. I moved some folders on my hard drive, and the program no longer could find the files. I went into options and changed the pathway for any prompt I saw had the former location. Next the part files I am working on are said to be missing. Something about the project location. I tried adding the files through managing the project found in options. Now Inventor says it is unable to open or even recognize the part files saved. How can I recover the files Attached are screenshots of the errors.
View 2 Replies
View Related
May 2, 2012
This morning I somehow changed the way the command icons are displayed, so how can I restore the command icons back to the default display. I've tried to figure out where the setting is for the way the icons are displayed, but I haven't been able to reset it back to the default setting.
Here's what the display got changed to, that I want to change back to the default setting.
View 4 Replies
View Related
Jan 9, 2012
Just installed 2012 Pro last week and tried to run FEA today. Everything else is running fine. Started with existing model and had this error. Went to a simple part with rectangle sketch 6x1x.125thk and still receive error. Found multiple issues with mesher errors in forum. So I removed all Autodesk products, cleaned registry, turned off antivirus and reinstalled software and SP1 and still receive error.
View 9 Replies
View Related
Aug 12, 2013
We facing the error shown in screenshot attached with this mail.
We are not able to read content centre.
I also check the path "C:ProgramDataAutodeskInventor 2013Content CenterLibraries" and found that its a empty.
We are using :
Software : Inventor 2012 Professional ultimate edition, MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
OS: Winxp (1 user )and win7(3 user)
the path to download these content centre files for inventor 2012.
View 1 Replies
View Related
Jan 16, 2012
Op System: Windows 7 Home Premium
Processor: Intel Core I7 960
Ram 12.0 GB system 64 Bit operating system.
MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010
Inventor Info: Autodesk Inventor Professional 2012 54 bit edition
Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
View 2 Replies
View Related
May 29, 2012
I have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
View 3 Replies
View Related
Jan 29, 2013
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
View 1 Replies
View Related
Nov 15, 2012
I have been using AutoCAD Architecture 2013 imperial for weeks. Then the other day I went to use it again and the program would not finish loading. The metric version that comes with the program does open.
View 5 Replies
View Related
Dec 10, 2012
when trying to load our custom menu i get the following error.
Write permission denied. Unable to create C:program files Autocad 2013SWRMenuSWR.cruix.
View 5 Replies
View Related
Apr 29, 2012
While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies
View Related
Nov 22, 2013
working with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
View 1 Replies
View Related
May 16, 2013
Initially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
View 1 Replies
View Related
Jul 17, 2013
AutoCAD 2014 isn't loading lisp routines when put in the start up suite.
They are loaded from a trusted location.
View 5 Replies
View Related
Jan 3, 2013
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
View 7 Replies
View Related
Apr 15, 2013
We use scripts a fair bit in acadLT & from the Desktop icon. The 2014 behavior has changed in that it displays a warning (screengrab attached) before allowing the script to load.
This is going to be a pain for users. I can't see a way to add a folder as a trusted source in LT.
View 9 Replies
View Related
Jan 9, 2014
I'm using AutoCad 2013 Civil 3D. I'm trying to import the attribute table from a GIS shapefile into AutoCAD. I tried it in Map but could not get it to work. I could not find and object file in creating a quirey.
View 2 Replies
View Related
Sep 12, 2012
When opening an assembly document via the API (inventorApplication.Documents.Open("path-to-document")), the browser pane and ribbon look like no document has been opened, even though the active environment (inventorApplication.UserInterfaceManager.ActiveEnvironment.DisplayName) is "Assembly".
View 2 Replies
View Related
Dec 19, 2011
I have a user that just recently discovered that the add-in manager does not load any more. I has been working fine for some time.
And I mean that we can't even open the add-in manager. The button is non responsive. I have tried to open it from the windows start menu and I get the message " can't create apprentice server".
Of course this effects all of the ad-ins including the CC and the vault.
I can log in as administrator and everything works fine so the install is good. I'm assuming it's got something to do with his user account settings and on that vein I tried to delete his Autodesk settings in both the registry and his user folder but with no luck.
We are running IV2010
Windows 7 x 64bit.
View 8 Replies
View Related
Jul 5, 2012
I have a bit of problem. I have created a Addin for Inventor using Visual Studion 2010 Professional.
My Addin Works fine for
Windows XP Professional Service Pack 3 (64-bit OS)
With Autodesk Inventor Professional 2012, 32-Bit Edition
Now I need to Deploy the addin on another Machine with below configuration,
Windows 7 Professional Service Pack 1(64 bit OS)
Autodesk inventor Professional 2012, 64-Bit Edition.
I tried to load my addin, it doesnot load, I tried to load it manually by Goint to Tools->Add-In and selecting my addin and selected "Loaded", Even then its not loading..
View 9 Replies
View Related
Mar 25, 2013
I am trying to load CATIA v5 files into Inventor 2013, which works great. However, the materials applied to the object in CATIA are not being imported. Instead the colors from the "Properties" dialog in CATIA are being applied. Is it possible to somehow maintain the materials? Since the constraints aren't imported either, I would have to reapply the materials for every position of this certain object (for renders), because adding the constraints in Inventor is too much work to be doing again.
View 1 Replies
View Related
Apr 13, 2012
Windows 7 64bit
Inventor 2010
Visual Studio Professional 2010
I have an Addin with several pieces of functionality that I have been working on for over a year now and have had no problems with it loading. Yesterday I was working on a bug in a function and when I set a break point it was not breaking in the correct location. Possably some miss match between the source and .pdb files. I tried a clean build but still could not get the break point to be correctly aligned with my source code.
I tried to unregister and re-register the Addin with regasm but no luck. I then decided to search the registry for the name of my Addin and was supprized to find thousnads of registry entries. I then decided to clean my registry of all occurances of the Addin name. After removing all occurances of my Addin from the registry my Addin would not load.
I tried putting a message box in the first line of the Activate sub but it never executes. I made the assumption that it was a problem with the registry and changed the GUID value. When I did a rebuild I got the following error:
Error 1 The "UnregisterAssembly" task failed unexpectedly.
System.Runtime.InteropServices.COMException (0x80030002): could not be found. (Exception from HRESULT: 0x80030002 (STG_E_FILENOTFOUND))
at Microsoft.Build.Tasks.NativeMethods.UnregisterTypeLib(Guid& guid, Int16 wMajorVerNum, Int16 wMinorVerNum, Int32 lcid, SYSKIND syskind)
at Microsoft.Build.Tasks.UnregisterAssembly.Unregister(String assemblyPath, String typeLibPath)
at Microsoft.Build.Tasks.UnregisterAssembly.Execute()
at Microsoft.Build.Framework.ITask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) AnthroAddIn
I ran the build again and did not get the error.This Addin is loaded on every CAD workstation in the company using an install program written with the Inno Setup Compiler. I installed the Addin using the installer and the Addin still will not load on my machine.
What is the best approch to debugging an Addin that will not load?When is it necessary to re-register your Addin using regasm?Is it possable that this problem is being caused a problem with the registry?I have read a number of posts regarding problems with Addin's not loading but have not found anything simmilar to this.
View 2 Replies
View Related
Sep 28, 2012
My Content Center Add-In is not loading in Inventor Pro 2012. It's listed as unloaded in the Add-In manager (see below), and, of course, "Place from Content Center" isn't shown as an option on any of the menus. If I double-click on Centent Center in the Add-In Manager, the word "Unloaded" changes to "Loaded" and I don't get any errors. It looks like it should have loaded fine. But then if I close the Add-In Manager and open it again, it has gone back to "Unloaded". I haven't found anything that can restore the Content Center functionality.
I have installed Inventor Pro 2013, and this could have been around when the Inventor 2012 Content Center broke. I'm not positive about the timing... If I start Inv 2013, the Content Center works fine in it.
What to do before uninstalling 2013 and/or reinstalling 2012?
View 2 Replies
View Related
Dec 2, 2013
I have an issue where an addin loads once the first time Inventor is opened. If the addin is unloaded and reloaded via the Addins dialog and no documents are open it loads once. If the addin is reloaded while a file is open is reloads twice.
I came to the conclusion it is loading multiple times because the it seems to go through the Activation method of the addin twice. When is the Activation method called during loading an addin?
Inventor Addins
FlowTools for Inventor
ilxButton Panel (Buttons for iLogic Rules)
View 2 Replies
View Related
Jul 24, 2012
I am into tracking solar array's. So designing for high winds is paramount. I wonder if Inventor will have a package for analysis of wind loads. It is a different kind of FEA. Call it a 3-D distributed load.
View 5 Replies
View Related
May 15, 2013
I have problem with Hole and Thread load menu input Thread.
i see only Loading thread data spredsheet .Please wait
win xp x32
inventor 2013
View 1 Replies
View Related
