I have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
working with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
I'm using AutoCad 2013 Civil 3D. I'm trying to import the attribute table from a GIS shapefile into AutoCAD. I tried it in Map but could not get it to work. I could not find and object file in creating a quirey.
View 2 Replies View RelatedWe have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
I recently downloaded the student version of Inventor Professional 2013 (64-bit). I made some parts and ran some stress analysis simulations on the parts. I restarted Inventor after running a simulation and upon the reopen, none of the add-ins on the Environments tab were there and the Add-Ins manager does not open. I tried uninstalling and reinstalling the entire program, even tried installing different model years of Inventor; none of the versions load the add-ins and the add-in manager fails to load.
View 9 Replies View RelatedI have been using AutoCAD Architecture 2013 imperial for weeks. Then the other day I went to use it again and the program would not finish loading. The metric version that comes with the program does open.
View 5 Replies View Relatedwhen trying to load our custom menu i get the following error.
Write permission denied. Unable to create C:program files Autocad 2013SWRMenuSWR.cruix.
While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies View RelatedInitially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
AutoCAD 2014 isn't loading lisp routines when put in the start up suite.
They are loaded from a trusted location.
We use scripts a fair bit in acadLT & from the Desktop icon. The 2014 behavior has changed in that it displays a warning (screengrab attached) before allowing the script to load.
This is going to be a pain for users. I can't see a way to add a folder as a trusted source in LT.
Im trying to load .shp files made from ArcMap 10.1 and continually get an error labeled “Invalid Repository Type”. I can’t seem to find any information on what exactly a repository type is or how to correct it.
View 2 Replies View RelatedIs it possible to do actions directly after loading the DVB file by command appload in the autocad command bar?
For example, creating a menu in the menu bar with the available procedures in the .DVB?
Loading an existing batch file to AutoCAD2013 Lt. I have a toolbar that was setup before and I have a new machine, new cad etc and want to get everything back to the way it was.
View 2 Replies View RelatedCan load or install a *.dat file into civil 3d 2012. i have a file form the army corp of engineers that will draw a structural shape in autocad but i can't seem to load the file in autocad or civil 3d.
View 8 Replies View Relatedwhy our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View Relatedi have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies View RelatedI want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View RelatedAfter downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
I'm having a problem loading a 5.5GB PSD file. it's generated from Lightwave a 3D software but every time i try to load it i get the following message:
Error loading PSD file: Unsupported compression mode: 58596
i've done this before and opened 3 and even 4gb files and never had a problem do you know if there is a cap on file size?
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?
View 5 Replies View RelatedI have problems loading a max file. The file has several containers with external content, and it started crashing on load after I created those containers.
I tried merging the file into an empty scene, and it works if I merge everything but the containers. I also tried merging the containers alone, and that makes it crash.
I need/want to use containers, because the scene is very big, and can be quite challenging to handle. I could try using X-refs instead, but I was hoping to use containers, since it seems like a good solution in theory at least!
The full my message I get is: "Error loading PSD file: Unsupported compression mode: 65409", do you know why? Is the file corrupted? Is there any way to recover it?
I don't have Photoshop, by the way. I use .psd format because I work on both GIMP and SAI. I tried to open it at SAI, but there were nothing but lines. The colors went missing.
I really don't want to lost the file, since this is something I work on for months. I can't redraw all the thing I drew since the deadline is in the end of May!
I'm trying to create my own set of Patterns in a .pat file.It doesn't work as the instructions say.But with an immense amount of effort, going about it in a roundabout way to get past security nonsense and locked files that weren't locked, I managed to create a .pat file with my Patterns in the proper folder. I couldn't do this directly. Instead I added my Patterns to an existing .pat file with the idea of later deleting those that aren't mine and restoring the original .pat file to its original state.However, I can't load my .pat file or any other .pat file. That is, the Load function doesn't work, so I can't have my own Patterns in a .pat file that I can access.I've tried to load the ,.pat file using the Preset Manager, using Layer > New Fill Layer > Pattern, and using the Paint Bucket tool, but the selected .pat file doesn't get added to the list of .pat files that can be used. What is the Magic Word to get a .pat file to Load?
View 6 Replies View RelatedI am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedI want to be able to use a windows batch file to create a gradient for gimp.
My code is: Code ........
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11