I'm having a problem loading a 5.5GB PSD file. it's generated from Lightwave a 3D software but every time i try to load it i get the following message:
Error loading PSD file: Unsupported compression mode: 58596
i've done this before and opened 3 and even 4gb files and never had a problem do you know if there is a cap on file size?
The full my message I get is: "Error loading PSD file: Unsupported compression mode: 65409", do you know why? Is the file corrupted? Is there any way to recover it?
I don't have Photoshop, by the way. I use .psd format because I work on both GIMP and SAI. I tried to open it at SAI, but there were nothing but lines. The colors went missing.
I really don't want to lost the file, since this is something I work on for months. I can't redraw all the thing I drew since the deadline is in the end of May!
I am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedI want to be able to use a windows batch file to create a gradient for gimp.
My code is: Code ........
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
The full message I'm getting reads: "Error loading PSD file: Unsupported compression mode: 60157."
Is there anything I can do to remedy this? I don't have PSD, so I can't open it that way...
how do i go about loading new fonts onto gimp ?
View 4 Replies View RelatedWhen I start up my GIMP in windows, it indexes the fonts every first time that I start after a reboot.I am using windows 7, is there anyway to tell gimp not to index the fonts ?
View 14 Replies View RelatedI have been using GIMP for a few weeks now and all of a sudden I cannot start the program anymore. During start up of GIMP 2.8 it displays a window saying it is loading data files. It gets as far as loading 'Tool presets' when it crashes. I tried restarting the computer and also uninstalling and re-installing GIMP with the same end result.
View 2 Replies View RelatedI have a series of PNG images which have been authored from various sources, but mostly with Gimp. The images have transparent backgrounds and use partial transparency effects like drop shadow, etc. I want to display these on a bitmap layer of the TImage32 component from Graphics32.
I have dropped a TImage32 component onto my form, with the intention being to set the visibility to off, and use the TImage32 as a container for the PNG image I want to draw on the layer.
When I go to load the image at design-time, the dialog has two tabs - it allows me to load the RGB image, and the alpha channel, and I don't know how to produce these - I prouce the image by using the export to PNG function of Gimp. If I load the exported PNG into both the RGB channel and the alpha channel the resulting image doesn't have the transparent background. There obviously must be a procedure I need to follow to get Gimp to produce both the RGB and alpha channels.
Im trying to load .shp files made from ArcMap 10.1 and continually get an error labeled “Invalid Repository Type”. I can’t seem to find any information on what exactly a repository type is or how to correct it.
View 2 Replies View RelatedIs it possible to do actions directly after loading the DVB file by command appload in the autocad command bar?
For example, creating a menu in the menu bar with the available procedures in the .DVB?
Loading an existing batch file to AutoCAD2013 Lt. I have a toolbar that was setup before and I have a new machine, new cad etc and want to get everything back to the way it was.
View 2 Replies View RelatedI have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?
View 5 Replies View RelatedI have problems loading a max file. The file has several containers with external content, and it started crashing on load after I created those containers.
I tried merging the file into an empty scene, and it works if I merge everything but the containers. I also tried merging the containers alone, and that makes it crash.
I need/want to use containers, because the scene is very big, and can be quite challenging to handle. I could try using X-refs instead, but I was hoping to use containers, since it seems like a good solution in theory at least!
Can load or install a *.dat file into civil 3d 2012. i have a file form the army corp of engineers that will draw a structural shape in autocad but i can't seem to load the file in autocad or civil 3d.
View 8 Replies View RelatedI'm trying to create my own set of Patterns in a .pat file.It doesn't work as the instructions say.But with an immense amount of effort, going about it in a roundabout way to get past security nonsense and locked files that weren't locked, I managed to create a .pat file with my Patterns in the proper folder. I couldn't do this directly. Instead I added my Patterns to an existing .pat file with the idea of later deleting those that aren't mine and restoring the original .pat file to its original state.However, I can't load my .pat file or any other .pat file. That is, the Load function doesn't work, so I can't have my own Patterns in a .pat file that I can access.I've tried to load the ,.pat file using the Preset Manager, using Layer > New Fill Layer > Pattern, and using the Paint Bucket tool, but the selected .pat file doesn't get added to the list of .pat files that can be used. What is the Magic Word to get a .pat file to Load?
View 6 Replies View Relatedwhy our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View Relatedi have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies View RelatedI want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View Relatedworking with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
Any solution to the endless pinwheel in 11 Editor (updates installed)? I load a previously created PSD file, move a few layers around and the endless pinwheel appears. Have to Force Quit.
MAC OSX 10.8.3
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
After downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
I was wondering if there might be a way to add the option to save a selection to the disk? when i work i create many selections with complicated shapes and areas.
since i need to use them more then once i was wondering if a feature for saving only the selection can be implemented ? this would enable me to load the selections to new projects and use them there making the same "print" every time.(my work around for this is saving a B/W picture of the shape then uploading it every time i need it , then copy and paste to a new layer
in the new project then selecting the shape area then flatting the image with the selection and deleting the internal area or the invert ) its long but works.if you can add "File Open into a NEW layer", this would save the need for part of my work around. i would then just load the save to the new layer and use it directly :-)
* This would be a great new feature anyway "File Open To a New layer" ... :-)
I saw this the save/load selection feature the other day in a photoshop presentation and was shocked that it's real :-)So if such feature can be added to paint.net even in version 4.0 it would be great and time saving too.
I'm using AutoCad 2013 Civil 3D. I'm trying to import the attribute table from a GIS shapefile into AutoCAD. I tried it in Map but could not get it to work. I could not find and object file in creating a quirey.
View 2 Replies View RelatedI have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies View RelatedThere seem to be a problem with PSE10 and PSE11 on my computer when loading image files digitized on my film scanner. When loaded into the editor the image file immediate takes today’s date and time, and thus changes place on the timeline. However, sometimes the original image file date remains intact, for no obvious reason. I find this very frustrating.
My setup is an HP computer running Windows7 Ultimate 64 bit, with i7 processor and 12GB memory. My film scanner is a Minolta Dimage Elite II working with a Windows XP-based computer, and data are transferred using memory stick.
It might be mentioned that I have made tests with a fixed set of image files on several computers running WindowsXP 32 bit, and several versions of PSE , including PSE10, without seeing this problem.
