Is it possible to do actions directly after loading the DVB file by command appload in the autocad command bar?
For example, creating a menu in the menu bar with the available procedures in the .DVB?
Photoshop CS6 has been working like a dream, and recently it has pushed some very large files.
But, upon trying to open Photoshop this morning, I get these two messages:
Could not load actions because an unexpected end-of-file was encountered.Could not initialize Photoshop because the Preferences file was invalid (it has been deleted). - although the file was still in the AppData...Adobe Photoshop CS6 Settings.
Tried to 'restore' Preferences:
Keyboard - CTRL ALT SHFT upon clicking PSD iconSaid 'Yes' to allow changes to systemStill received same two messagesRemoved the Adobe Photoshop CS6 Prefs.psp Restarted Photoshop, still received same two messages. Tried resetting, CTL ALT SHFT, again still same two messages.
Read Adobe thread to 'rename' the Actions Palette.psp, but keep it in the folder:
I renamed it 'renamed' and left the Adobe Photoshop CS6 Prefs.psp in the folder as well.Did not receive the 'load actions' error, butStill received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.Left the Actions as 'renamed', but removed the Adobe Photoshop CS6 Prefs.psp file as well.Still received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.
I have downloaded an action (*.ATN) file from a trusted source and saved it in the Adobe/Adobe Photoshop CS5/Presets/Actions folder. When I explore this folder via windows it shows the action I saved plus the default actions that came with Photoshop. When I click on "load actions" from the actions pallete I get a message that says the same folder is empty. Under file type it is looking for the correct file type (*.ATN).
View 1 Replies View RelatedWhen I loaded some photo actions into my new PSE11 it show only a generic icon in the effects palette, not the icon from the maker so it takes extra time to search for the action I need. How can I get the icon from the maker to show as the icon in the palette?
View 3 Replies View RelatedIm trying to load .shp files made from ArcMap 10.1 and continually get an error labeled “Invalid Repository Type”. I can’t seem to find any information on what exactly a repository type is or how to correct it.
View 2 Replies View RelatedLoading an existing batch file to AutoCAD2013 Lt. I have a toolbar that was setup before and I have a new machine, new cad etc and want to get everything back to the way it was.
View 2 Replies View RelatedI have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
Can load or install a *.dat file into civil 3d 2012. i have a file form the army corp of engineers that will draw a structural shape in autocad but i can't seem to load the file in autocad or civil 3d.
View 8 Replies View RelatedIs there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Relatedwhy our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View Relatedi have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies View RelatedI want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View Relatedworking with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
After downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
I'm using AutoCad 2013 Civil 3D. I'm trying to import the attribute table from a GIS shapefile into AutoCAD. I tried it in Map but could not get it to work. I could not find and object file in creating a quirey.
View 2 Replies View RelatedI'm having a problem loading a 5.5GB PSD file. it's generated from Lightwave a 3D software but every time i try to load it i get the following message:
Error loading PSD file: Unsupported compression mode: 58596
i've done this before and opened 3 and even 4gb files and never had a problem do you know if there is a cap on file size?
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?
View 5 Replies View RelatedI have problems loading a max file. The file has several containers with external content, and it started crashing on load after I created those containers.
I tried merging the file into an empty scene, and it works if I merge everything but the containers. I also tried merging the containers alone, and that makes it crash.
I need/want to use containers, because the scene is very big, and can be quite challenging to handle. I could try using X-refs instead, but I was hoping to use containers, since it seems like a good solution in theory at least!
The full my message I get is: "Error loading PSD file: Unsupported compression mode: 65409", do you know why? Is the file corrupted? Is there any way to recover it?
I don't have Photoshop, by the way. I use .psd format because I work on both GIMP and SAI. I tried to open it at SAI, but there were nothing but lines. The colors went missing.
I really don't want to lost the file, since this is something I work on for months. I can't redraw all the thing I drew since the deadline is in the end of May!
I'm trying to create my own set of Patterns in a .pat file.It doesn't work as the instructions say.But with an immense amount of effort, going about it in a roundabout way to get past security nonsense and locked files that weren't locked, I managed to create a .pat file with my Patterns in the proper folder. I couldn't do this directly. Instead I added my Patterns to an existing .pat file with the idea of later deleting those that aren't mine and restoring the original .pat file to its original state.However, I can't load my .pat file or any other .pat file. That is, the Load function doesn't work, so I can't have my own Patterns in a .pat file that I can access.I've tried to load the ,.pat file using the Preset Manager, using Layer > New Fill Layer > Pattern, and using the Paint Bucket tool, but the selected .pat file doesn't get added to the list of .pat files that can be used. What is the Magic Word to get a .pat file to Load?
View 6 Replies View RelatedIs it possible to record certain actions on a raw file without opening the file in Photoshop?
Let's assume I have 250 files, all needing lens correction (and maybe other common tweaks) as a basic first step. I'd like to be able to record an action that
(1) opens my NEF file in ACR;
(2) makes the lens correction based on the profile for the particular lens I used;
(3) [other tweak--say noise reduction];
(4) [other tweak--say color temperature]; and then
(5) closes the file generating nothing but the .xmp file.
Then when I go to work on each file, all my basic corrections have been made so that when I reopen later in ACR, I only have to make custom changes before finally opening in Photoshop.I've tried a few things, scanned the forums, checked the online help center, gone through a few Adobe TV tutorials, but I can't figure out how to do it.
I have cs6 and I can't open any actions that have an ATN file format.
View 3 Replies View RelatedTrying to automate file saving in different sizes/formats through an Action in PS CS3. However, always closes the open image after the first save. Any way to automate saves but leave the images open in PS?
View 4 Replies View RelatedWorking with Edge version 1.5.0 and Visual Studio 10. Just about finished with a project and now all of my code has disappeared from Edge, I can't see any of my triggers on the timeline or events on the buttons. I can still open the html in a browser and everything still works but I can't do any more edits inside of Edge because I can't see the code in there.
The edge actions file has all the code, but Edge does not see any of it inside Edge. I tried pasting the full code back into Edge but it would not save it. How can I get edge to see the code again?
I am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedI want to be able to use a windows batch file to create a gradient for gimp.
My code is: Code ........
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
Any solution to the endless pinwheel in 11 Editor (updates installed)? I load a previously created PSD file, move a few layers around and the endless pinwheel appears. Have to Force Quit.
MAC OSX 10.8.3