GIMP :: Open AI File Not Loading Full Image
Apr 5, 2012
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
View 2 Replies
ADVERTISEMENT
Oct 20, 2013
I am trying to open this image [URL] ... that I downloaded the full sized image and it doesn't matter how many times I download it or open it in Gimp it shows up in Gimp corrupt and gives me the error "premature end of jpeg file" but Windows Photo Viewer views the image just fine! what is wrong when I open it in Gimp???
View 3 Replies
View Related
Oct 3, 2012
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Jun 15, 2012
I'm having a problem loading a 5.5GB PSD file. it's generated from Lightwave a 3D software but every time i try to load it i get the following message:
Error loading PSD file: Unsupported compression mode: 58596
i've done this before and opened 3 and even 4gb files and never had a problem do you know if there is a cap on file size?
View 1 Replies
View Related
Jan 23, 2013
When I open an Illustrator document it opens full screen - meaning the top left corner of the document is at the very top left of my screen, (behind my tools) - and the bottom right is at the very bottom right of my screen (and behind my palettes).Is there a preference setting so that a file would open in the middle of my screen - NOT full screen?
View 11 Replies
View Related
May 15, 2012
I was wondering if there might be a way to add the option to save a selection to the disk? when i work i create many selections with complicated shapes and areas.
since i need to use them more then once i was wondering if a feature for saving only the selection can be implemented ? this would enable me to load the selections to new projects and use them there making the same "print" every time.(my work around for this is saving a B/W picture of the shape then uploading it every time i need it , then copy and paste to a new layer
in the new project then selecting the shape area then flatting the image with the selection and deleting the internal area or the invert ) its long but works.if you can add "File Open into a NEW layer", this would save the need for part of my work around. i would then just load the save to the new layer and use it directly :-)
* This would be a great new feature anyway "File Open To a New layer" ... :-)
I saw this the save/load selection feature the other day in a photoshop presentation and was shocked that it's real :-)So if such feature can be added to paint.net even in version 4.0 it would be great and time saving too.
View 5 Replies
View Related
May 16, 2013
The full my message I get is: "Error loading PSD file: Unsupported compression mode: 65409", do you know why? Is the file corrupted? Is there any way to recover it?
I don't have Photoshop, by the way. I use .psd format because I work on both GIMP and SAI. I tried to open it at SAI, but there were nothing but lines. The colors went missing.
I really don't want to lost the file, since this is something I work on for months. I can't redraw all the thing I drew since the deadline is in the end of May!
View 3 Replies
View Related
Apr 1, 2013
When I choose Open Drawing and the window pops up, it would be nice if the full path name of the file showed up on the bar where it shows the file name (see attachment). As it is I can't tell if this file is on my c drive or my back-up drive.
The individual drawings show the full path name once they're open, can the same be achieved with the Open Drawing window?
View 1 Replies
View Related
Jul 31, 2013
I am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies
View Related
Apr 22, 2012
I want to be able to use a windows batch file to create a gradient for gimp.
My code is: Code ........
View 1 Replies
View Related
Oct 23, 2012
If I take an image, and using the path tool, draw an area, then do a selection from path, cut/copy and paste as 'new image' then save the new image as a .bmp, .jpg etc, I am getting the whole original image instead of the cut an pasted portion. The full image does not show up as long as the drawing remains in .xcf (the background is a grey checkerboard). When saved as .jpg or .bmp the checkerboard is replaced by the original source image that it was cut from. This is Gimp 2.6.11 under Linux.
I have checked for extra layers, tried removing alpha channels, doing a 'copy visible' and re-pasting, merging of all layers all to no avail. It doesn't always happen either so there must be something, some setting or clicky box somewhere.
View 3 Replies
View Related
Nov 2, 2012
I've been messing around with this shape, mostly based on ideas from the skull medallion tutorial over at Gimp users, and was wondering what is causing the white jagged line that appears along the bottom of the wing and also to the outer edges. It only appears after I have run the Lighting Effects filter.It's not too obvious on the full size image of the batman type symbol, but becomes quite noticeable when a section is enlarged.
View 3 Replies
View Related
Feb 7, 2012
The full message I'm getting reads: "Error loading PSD file: Unsupported compression mode: 60157."
Is there anything I can do to remedy this? I don't have PSD, so I can't open it that way...
View 3 Replies
View Related
Dec 25, 2013
I have saved a file in corel. on the second day, when i want to open the file,is writting: "File Copy Error" TEMP Drive or Output Drive may be Full" Is there any posibility to recover the file. The recovery toolbox can not recover the file.
View 14 Replies
View Related
Dec 22, 2011
When I load a set of files into RAM Player they do not always fully load. In two separate instances 1381 frames have loaded (in todays example there are 1921 frames rendered in the set).
I guessed that stopping at 1381 frames on two occasions was a bit curious and maybe thought the memory limit was not set high enough. I increased this but no change.
View 4 Replies
View Related
Dec 31, 2012
I am on a Mac Retina with 16GB of memory . LR4.3 most of the time will not load a full resolution image in the Library module. I can switch to the develop module and it will load. When I return to the Library module it will stay loaded at full resolution. Switching to a different photo in Library will start the same process over again. In the Library module the full resolution will load when a 1:1 is selected. And this happens consistently. But the Library module will not load full resolution by default.A
View 5 Replies
View Related
Apr 17, 2013
I'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.
View 9 Replies
View Related
May 28, 2013
There seem to be a problem with PSE10 and PSE11 on my computer when loading image files digitized on my film scanner. When loaded into the editor the image file immediate takes today’s date and time, and thus changes place on the timeline. However, sometimes the original image file date remains intact, for no obvious reason. I find this very frustrating.
My setup is an HP computer running Windows7 Ultimate 64 bit, with i7 processor and 12GB memory. My film scanner is a Minolta Dimage Elite II working with a Windows XP-based computer, and data are transferred using memory stick.
It might be mentioned that I have made tests with a fixed set of image files on several computers running WindowsXP 32 bit, and several versions of PSE , including PSE10, without seeing this problem.
View 5 Replies
View Related
Jan 23, 2014
I'm using Gimp 2.8.6.Try as I might, I'm still trying to figure out how to effectively 'merge' 3 shots of the same scene taken at 3 different exposures (using the exposure bracketing feature on my camera).The idea is to end up with the equivalent of an HDR image.
I assume that I open the first image and then open the other two as layers . .
View 6 Replies
View Related
Nov 25, 2013
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
View 6 Replies
View Related
Feb 13, 2013
How do I open a new image in Gimp?
I open Gimp
I drag an image file into Gimp
That's OK. Image is opened
Now, I want to open another image Dragging into Gimp doesn't work - wherever you drag it?Why is this?
Another way I like to open is to press 'Ctrl O' and then paste the path of a folder and press return This then takes me to that folder and shows me all images inside(The same behaviour will work with any other program on WIndows) With Gimp, this is not possible .There is no path displayed when you first click Ctrl O.I've found how to get the path: click on one of the locations on the left pane and then click on the 'Type Name Field' icon - this then gives you a location in which you can type the path
it only takes a second or two to do, but it would be nice if we just could past the path name or start typing the path name after pressing 'Ctrl O' - like ALL other Windows programs!
View 2 Replies
View Related
Jan 27, 2006
How can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies
View Related
Jan 23, 2013
I will do absolutely ANYTHING to restore this picture. I've been working on it for hours. I thought I learned my lesson from working for hours and not saving, but apparently my lesson might now be to save in 8 places while working.
I was working on a drawing, saving as I went, and my laptop shut off unexpected as I was saving. I thought it saved before it shut off, but when I came back on, it wouldn't open the xcf file. The preview still shows up, and the file is still 1.37MB. Is there ANY way of redeeming my drawing? Any other programs I could open it in or way to fix it?
View 3 Replies
View Related
Apr 5, 2013
Want to open a html -file in GIMP . Is this possible!? IF so - how?
View 1 Replies
View Related
Jun 26, 2012
Completely new to photo editing and gimp. I am trying to open a vector.eps file but keep getting the message below. I have downloaded Ghost script, but still cant open anything. Is it essential that ghostscript is dowloaded? how can I open the file?
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location. (Failed to execute child process (No such file or directory))
View 2 Replies
View Related
Aug 16, 2013
Im looking for the gimp equivellent to photoshops View>extras. If there is one. I need to open a jpg file with guides in it, but they do not show up when I open the file.
View 3 Replies
View Related
Aug 18, 2011
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies
View Related
Feb 3, 2012
When i open Gimp, the image window size is way too big.
View 5 Replies
View Related
Nov 20, 2013
I've created a New image and selected Open Layer to bring another image in, however the 'other' Open layer image' appears in the center of the newly opened image space. How can I move the Open layered image around?
View 1 Replies
View Related
Nov 8, 2011
If I open with Photoshop I can see the real image, but whit gimp this is how it looks like.
Uploaded with ImageShack.us
View 2 Replies
View Related
Jul 8, 2012
i can't open any file type except .png files.i think cause is from libjpeg and when i compile gimp didn't install and i has to compile with --disable-jpeglib or like this switch.
View 3 Replies
View Related
