GIMP :: How To Open XCF File
Jan 23, 2013
I will do absolutely ANYTHING to restore this picture. I've been working on it for hours. I thought I learned my lesson from working for hours and not saving, but apparently my lesson might now be to save in 8 places while working.
I was working on a drawing, saving as I went, and my laptop shut off unexpected as I was saving. I thought it saved before it shut off, but when I came back on, it wouldn't open the xcf file. The preview still shows up, and the file is still 1.37MB. Is there ANY way of redeeming my drawing? Any other programs I could open it in or way to fix it?
View 3 Replies
ADVERTISEMENT
Apr 5, 2013
Want to open a html -file in GIMP . Is this possible!? IF so - how?
View 1 Replies
View Related
Jun 26, 2012
Completely new to photo editing and gimp. I am trying to open a vector.eps file but keep getting the message below. I have downloaded Ghost script, but still cant open anything. Is it essential that ghostscript is dowloaded? how can I open the file?
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location. (Failed to execute child process (No such file or directory))
View 2 Replies
View Related
Aug 16, 2013
Im looking for the gimp equivellent to photoshops View>extras. If there is one. I need to open a jpg file with guides in it, but they do not show up when I open the file.
View 3 Replies
View Related
Jul 8, 2012
i can't open any file type except .png files.i think cause is from libjpeg and when i compile gimp didn't install and i has to compile with --disable-jpeglib or like this switch.
View 3 Replies
View Related
May 12, 2011
I have been using Gimp for a while and have never had this happen. When I open Gimp, it does not show the usual Gimp, File, Help Menu at the top. I am unable to open a file in Gimp. I have uninstalled and reinstalled and still this tab is missing.
View 1 Replies
View Related
Jan 21, 2013
Is it possible to open a file from an external drive? In the open dialog window I see only references to my internal drive.
View 4 Replies
View Related
Sep 4, 2013
I am running 2.8 with Windows 7 64 bit. This just started today. I had done a picture, then closed out gimp. When I reopened it, I could no longer open files in Gimp. I can start gimp, then click on open files, and scroll through the files, and as soon as I select one, it whites out and says Gimp has stopped responding. I uninstalled and reinstalled the program, same issue. I tried jpeg, png, and xfc files, none will load.
View 5 Replies
View Related
Aug 4, 2012
Start up Gimp and get an error message as follows:
Unable to open swap file. GIMP has run out of memory and cannot use the swap file. Some parts of your images may be corrupted. Try to save your work using different filenames, restart GIMP and check the location of the swap directory in your Preferences.
When I check preferences, the path to the swap file is not correct. My path is user to Application to Application Support to Library to Gimp.
View 2 Replies
View Related
Dec 7, 2013
Windows 7 64 bit user.
Upgraded to 2.8 with total deletion of the Gimp folder to try to address this.
File / Open Recent works fine.
File / New etc same all good...
File / Open has a problem.
Once that window opens the product is hung.
There is no window to type the file name in, and I cannot click on any of the disk drive names.
I must admit that I have a good number of network and usb as well as physical drives. I do not think that any have changed names, but it seems clear that something like a path change is responsible?
How to repair a stuck File/Open dialogue.
View 1 Replies
View Related
Apr 25, 2011
I need to edit several video frames in order to blur someone's face in the video and it would be useful to "enqueue" files. What I would like to obtain is that when I have edited, saved and closed image1, GIMP would automatically open image2 and so on.
View 5 Replies
View Related
Mar 7, 2013
I am trying to move a text layer from one open file to another. I left-click on a text layer in one file and drag it to the tab of the other file. It seems to be successful, but there is no layer added to the other file.
If I try copy and paste then there will be another layer in the other file that I have to anchor or set as a new layer. If I anchor it then it becomes a part of the default layer. If I set it as a new layer then there is some sort of success, but I can’t edit it with the text tool as I can if I copy it within the same file.
Is it not possible to copy text layers between open files and continue to edit it with the text tool?
View 2 Replies
View Related
Oct 10, 2012
When I try to open a PSD file in GIMP, it breaks - the color is lost.
Here is what it should look like: [URL]....
This is how it appears in gimp: [URL].....
Here is the original, how to convert it to a format that actually works??? [URL].....
View 3 Replies
View Related
Oct 20, 2013
I am trying to open this image [URL] ... that I downloaded the full sized image and it doesn't matter how many times I download it or open it in Gimp it shows up in Gimp corrupt and gives me the error "premature end of jpeg file" but Windows Photo Viewer views the image just fine! what is wrong when I open it in Gimp???
View 3 Replies
View Related
Apr 5, 2012
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
View 2 Replies
View Related
Mar 24, 2012
I have installed both version 2.6.11 and also version 2.4.7 of the Windows version of Gimp that I have downloaded from here [URL]
When I launch Gimp, and select File / Open from the main menu, neither TIF/TIFF nor JPG/JPEG files are listed when "All Images" is selected in the file type drop-down listbox. If I select "All Files", and then select either a TIFF or JPEG file, then an error message appears stating "Unknown file type". The specific types listed in the file type drop down list box include:
GIMP XCF image (*.xcf)
bzip archive (*.xcf.bz2, *.bz2, *.xcfbz2)
Dexktop Link (*.desktop)
G3 fax image (*.g3)
GIF image (*.gif)
gzip archive (*.xcf.gz, *.gz, *.xcfgz)
Photoshop image (*.psd)
I have read here: [URL] that, "Some of the file types, such as JPEG and TIFF, require extra libraries (described elsewhere)." I have no idea where "elsewhere" is.
I have completely uninstalled, rebooted, and reinstalled both version 2.6.11 and 2.4.7 with the exact same results each time. The program otherwise works as advertized, with no errors or problems that I am aware of.
Am I missing something here? All indications are that GIMP (Even the Windows version) natively supports TIFF / TIF and JPEG / JPG files, but that is certainly not my experience!
I am specifically interested in opening TIFF / TIF files.
View 3 Replies
View Related
Oct 18, 2011
I'm using Lion, and to install the Leopard version of GIMP. I'm getting an error message, and don't know what action to take:
Unable to open a test swap file.
To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/Users/myname/Library/Application Support/Gimp").
View 2 Replies
View Related
Mar 1, 2011
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies
View Related
Sep 18, 2013
when i save my documents in gimp it doesnt show the network folder.i used to save my documents in shared folder which is in the another PC
View 7 Replies
View Related
May 6, 2013
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
View 1 Replies
View Related
Jan 23, 2014
I'm using Gimp 2.8.6.Try as I might, I'm still trying to figure out how to effectively 'merge' 3 shots of the same scene taken at 3 different exposures (using the exposure bracketing feature on my camera).The idea is to end up with the equivalent of an HDR image.
I assume that I open the first image and then open the other two as layers . .
View 6 Replies
View Related
Feb 6, 2013
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies
View Related
Jan 21, 2009
I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
View 3 Replies
View Related
Mar 1, 2013
I'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
View 1 Replies
View Related
May 27, 2012
When I open a RAW file in the Develop module ACR dsoes not open. What am I doing wrong?
View 3 Replies
View Related
May 19, 2012
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
View 93 Replies
View Related
Oct 3, 2012
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Apr 24, 2013
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
View 4 Replies
View Related
Oct 30, 2012
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
View 1 Replies
View Related
Mar 9, 2012
As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
View 5 Replies
View Related
Mar 22, 2011
I am unable to use the file command open, new etc. I click on open and nothing happens no file box opens. As soon as you do anything else the program says not responding and you have to close it down. I can click on an autocad file in windows explorer and bring up the file this way but as soon as you try any file command such as save as the program freezes again. I am running windows 7 professional and the autocad LT 2011 64 bit program.
View 9 Replies
View Related
