GIMP :: Full Size Image Of Batman Type Symbol
Nov 2, 2012
I've been messing around with this shape, mostly based on ideas from the skull medallion tutorial over at Gimp users, and was wondering what is causing the white jagged line that appears along the bottom of the wing and also to the outer edges. It only appears after I have run the Lighting Effects filter.It's not too obvious on the full size image of the batman type symbol, but becomes quite noticeable when a section is enlarged.
View 3 Replies
ADVERTISEMENT
Jul 7, 2011
I'm trying to get that batman spotlight effect. I want to have it look like I am projecting my text onto clouds. I kinda have decent looking clouds, how to make it look like I'm really lighting up the clouds with a spotlight.
View 5 Replies
View Related
Jul 2, 2012
For some unknown reason when I try to open an image file using PSE9 the image opens at 1% resolution instead of full screen. I have to manually enlarge the file to 100% and then enlarge it's window as well. I've already tried re-installing the software but the problem persists. Using Mac OS10.6.8
View 6 Replies
View Related
Jun 13, 2010
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies
View Related
Aug 28, 2012
just downloaded Paint.net recommended by our IT manager. I need to be able to print an image 5"L x 1.875"W. I figured out how to resize in the program, but it still prints full size.
View 1 Replies
View Related
Aug 2, 2012
Can not view image at full size when in liquify. e.g. the image is much smaller when you select liquify and when you enlarge it it pixelates. Is there a adjust or is something wrong with my Elements?
View 10 Replies
View Related
Oct 23, 2012
If I take an image, and using the path tool, draw an area, then do a selection from path, cut/copy and paste as 'new image' then save the new image as a .bmp, .jpg etc, I am getting the whole original image instead of the cut an pasted portion. The full image does not show up as long as the drawing remains in .xcf (the background is a grey checkerboard). When saved as .jpg or .bmp the checkerboard is replaced by the original source image that it was cut from. This is Gimp 2.6.11 under Linux.
I have checked for extra layers, tried removing alpha channels, doing a 'copy visible' and re-pasting, merging of all layers all to no avail. It doesn't always happen either so there must be something, some setting or clicky box somewhere.
View 3 Replies
View Related
Apr 5, 2012
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
View 2 Replies
View Related
Mar 14, 2013
Currently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies
View Related
Sep 17, 2012
I am having problems copying/pasting an image into Gimp. Instead of the image itself being pasted, it pastes the mac symbol for Jpeg (the photo of the little Asian boy by the sea with the camera lens on top). The same happens pasting an EPS file. I don't understand as I have managed to paste an image before. I have tried pasting into selection/pasting as new image/pasting as new layer. All the same. Neither will Gimp let me drag an image into it from finder or the desktop. I've tried opening a new file from scratch too. Same problem.
I'm using a macbook pro. OX 10.6.8
View 3 Replies
View Related
May 10, 2011
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies
View Related
Nov 22, 2012
I've recently started to learn about GIMP and during some basic messing around I've stumbled upon some artwork and wish to make something like this.[URL]. here is imposes a logo [URL] on a flag. What kind of tools I need to learn to get this result with any kind of flag/logo?
View 1 Replies
View Related
Feb 17, 2011
Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
View 9 Replies
View Related
Jun 17, 2009
How do you type a copyright symbol in Photoshop Elements 6? I've looked through my fonts and can't figure this out.
View 8 Replies
View Related
Oct 8, 2012
does the new elements 11 have the uk copyright symbol in the text options.
View 5 Replies
View Related
Feb 1, 2013
Assume PS CS6. I cannot find an easy way. I have tried Character Panel, select the superscript and type letter o for degree symbol. But how to get it directly?
View 7 Replies
View Related
Aug 16, 2011
if you can type the alpha symbol for angle in Coreldraw.
View 2 Replies
View Related
Oct 15, 2012
I got a tremendous amount of assistance from Rich 2005 about increasing the size of a particular image last week. I applied the same technique to another image with poor results. (Much loss of clarity, worsened by sharpening.) I imagine there are several ways to increase image size. Is there a way to increase this one without losing clarity?The first image is the original, the second is increased 100 percent, without sharpening.
View 2 Replies
View Related
May 15, 2012
I need to design a vinyl banner using GIMP. The size of the banner will be 4'X8'. What size should I set the starting image size WXH ?? Should I keep it at pixels instead of footage?
View 1 Replies
View Related
Jun 25, 2012
When I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
View 1 Replies
View Related
Oct 26, 2012
I'm a former Photoshop user. The reason I no longer use it is because of a silly misunderstanding with the NSA and MI6. But hey, that's the past and I'm a believer in moving on.
Anyway, my first inquiry here is a simple one having to do with selection. When I used PS I would at times use the wand selector and then open a new file which already had the dimensions of the selection. Thing is, when I select something in Gimp and open up the new file it still has the same size as the main image from which an area was selected, i.e., if the main image was 500x500 and I selected something 100x100 the copy was still 500x500.
And I can assure you it has nothing to do with remote viewing and foreign embassies.
View 3 Replies
View Related
Jul 22, 2012
I'm using Gimp 2.8 on Fedora 17 i686. I have noticed that when I cancel out of set image canvas size and return to set image canvas size I have no preview image. I was wondering if this is a problem with Gimp
View 1 Replies
View Related
May 11, 2011
I made a 5x35 image using a gradient that i'll use as background for a div.I saved it as .jpg. Its size now is 325 bytes.Is there any additional method to make the size smaller?
View 3 Replies
View Related
Dec 27, 2011
Surprised I could not turn this up in the Search. Whenever I open a new image to resize it, it does not change size, but sometimes I have seen it larger than this standard size. I need more space for my work, I dont like working with Zoom, or small print. How can I fix setting new image size so the entire background will increase?
View 10 Replies
View Related
Feb 3, 2012
When i open Gimp, the image window size is way too big.
View 5 Replies
View Related
Mar 8, 2012
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
View 3 Replies
View Related
Aug 19, 2012
I want to scale down the size of each image in a set of 125 photos, to save storage space in my computer. How can I do this other than one at a time?
View 1 Replies
View Related
Mar 22, 2012
Estimate how big an area of a website is, so I know how big I should make my image?
View 1 Replies
View Related
Dec 27, 2011
I'm always cropping pieces of a large composition, then saving, then undoing and repeating. I noticed that GIMP has an understanding of layer size. If I could only save the image based on the layer size, I wouldn't need to crop every time, then undo. It would just know!
Aside from the redundancy, sometimes changes are made after cropping and saving and I am unable to return back to my original document size after exhausting undo's. Which means that everything else in the image is gone.
View 1 Replies
View Related
Nov 19, 2013
How can you do this? I generally create images of a different size than that so it would be really useful to be able to change it.
View 3 Replies
View Related
May 2, 2012
I've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
View 5 Replies
View Related
