Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View RelatedTrying to create a ARCH D size pdf in landscape orientation and it cuts off the image and places it back in a protrait orientation. 11 x 17 works great.
View 7 Replies View RelatedI'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
I am using AutoCAD 2006. I have a set of road plans that is 25 pages long. This means that I have 1 model space tab and 25 paperspace layouts. Each paperspace layout contains 1 viewport that shows a specific piece of my model space drawing. I need to be able to print these 25 layouts to multiple printers at multiple sizes. Specifically, I want to be able to print 11x17 sheets on printer #1, 11x17 sheets on printer #2, and 22x36 sheets on printer #2. I know how to create named page setups so that I can just pick which one I want to use to print.
Problem #1 - When I change from printer #1 to printer #2, keeping the same size (11x17) sheet, the paper moves slightly relative to my viewport that is on the page. Therefore, I have to move 25 viewports (1 on each page) every time I want to print my plans.
Problem #2 - When I change the size of page I want to print, the viewport does not size to the page. Therefore, I have to resize the 25 viewports and re-zoom their contents every time I change the size of paper I'm printing on.
Problem #3 - When I want to change the printer or size of sheet that I am using, I have to go to every layout tab and select the individual plot setup that I want to use. Is there a way to apply 1 named page setup to all layouts at once?
Ideally, there would be some way to link the viewport to dynamically change with changes in the paper location and size, but I'm not sure that's possible.
Again, I am using AutoCAD 2006.
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies View RelatedI have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
Is it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies View RelatedThis is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View RelatedUsing an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedI cannot see the full spectrum of my document size in print preview. I have my document setup as 8ft. X 5 ft.
But when i try to see it in print preview it only shows my document between 3 1/2 ft. to 4 1/2 ft.
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
I have found that if you publish to single-sheet .pdf's and then combine the .pdf's into one file using Acrobat, each sheet is bookmarked using the name of the individual files for the bookmark names. However, if you publish to a multi-sheet .pdf, no bookmarks are created. Is there any way to create multi-sheet .pdf's in AutoCad and have bookmarks automatically inserted (using the name of the layout as the bookmark name)?
View 3 Replies View RelatedThe Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies View RelatedI'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
I have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem. I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
The rule of thumb for traditional illustration work is to do the original about 1/3 larger than it will be printed to allow for some tightening up. My question is, when working in photoshop at 300 dpi, is there any reason to work larger than the print size?
View 2 Replies View RelatedI want to create a template whereby I can make a series of images that I can save as jpgs, upload to my blog, and people can print them. When they print, I want them to be one quarter of a sheet of paper (fit four to a page).
I tried creating a new image using the "inches" specification and those inches seem to have no bearing on inches in real life once printed.
So then I figured that a sheet of paper is 8.5 by 11 and I want a resolution of 300 dpi.
So 8.5 times 300: 2,550 pixels. Times that by 0.25 to get a quarter of it: 637.5 (which gets rounded to 638 pixels).
11 times 300: 3,300 pixels. Times that by 0.25= 825 pixels.
So I put in for 638 pixels by 825 pixels and 300 dpi. I created my image. I saved it as a jpg at full resolution. I uploaded it to my site and tested out the printing.
It took up most of a sheet of paper. Not even close to being a quarter of a sheet.
I've been using 2.6 and created a template for multiple business cards on a standard 8.5 by 11 sheet. [URL]
However the later versions ... 2.8 cause distortions when I try to print. ( Canon MG 2120) The standard 8.5 by 11 mysteriously converts to 7.997 by 10.349 inches .... and a weird 318.870 ppi appears. This obviously distorts my template and the 2 by 3.5 inch cards become odd sizes. When I open the template in 2.6, it works perfectly.
What has happened to the later version? i can't reset to inches and even using the 2559 by 3300 pixils with the 1050x600 card sizecan't be printed accurately So I'm now creating in 2.8 and opening in 2.6 to get my sizes correctly.
I love the expanded tools for drawing in the 2.8 ... but this feature is a nuisance ... along of course with the terrible sizing scale for the brushes. SO hard to calibrate the smaller and moe common sizes. Another bad feature.
Have I missed some adjustment somewhere. Using the same printer, same download gives two different prints sizes in 2.6 and 2.8.
I know Photoshop can do this but is there anyway to make the pixel size not change if im messing with the print size of a photo?
View 6 Replies View Relatedlately I've been started working on Illustrator, since I've always loved the vector pen tool in Photoshop, but I've notice something...
let's say I want to work on an A4 page. I start a new PRINT document, and set the A4 size at 300 DPI. If I do that on Photoshop, I'll get a huge white page that at 100% goes way out my screen, but if I start a document with the same size in Illustrator, I get a page that's smaller than my screen (at 100%).
I guess it's normal because those programs might work in different ways, but I'm concerned about it because this way, in Illustrator a 1pt size brush will always be bigger than in Photoshop.
I run a department that cleans PDF architectural drawings in Illustrator and Photoshop for use in online documentation software. I am currently working on creating spreadsheets laying out "if plan is 1/8" = 1', scale at 'X' %", etc, as up until now it is simply done by eye, but we try to scale up or down all plans to roughly the same size. While trying to determine a scaling ratio to create these charts, I realized that when I imported the same PDF into AI, it resizes the image, where as when I import it into photoshop, it imports it at full size. For example, I took the same PDF and dropped it into AI, and it was 2108 x 2881, and when dropping into PS it was 8788 x 12007
How can I import a PDF into AI and PS and have them be the same dimensions?I saved a GIF file 5,000 pixels wide, and it imported 5,000 pixels wide into both programs, so it appears I am only having this issue when working with PDF files.
Using Illustrator CS5.5, I'm trying to open and use floor plan PDFs originally created from AutoCAD, Revit, etc. The files contain detailed vector artwork, but the file sizes and RAM/CPU usage I'm seeing don't seem to correspond to the information in the file. I open a 2MB floor plan PDF and when I save as Illustrator, it becomes 20MB. It takes 2GB of RAM to open that file.
I've checked for masks and transparencies, but can't figure out what's making these so difficult to work with. Are there attributes I'm not checking that could be slowing things down?
I've been working on a project, and I created all the elements separately in JPG, gif, etc...
However, when pasting them in the final document, they look even smaller, but they should be only half the size.
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.