GIMP :: Print Size Changes In 2.8 To Wrong Size
May 7, 2013
I've been using 2.6 and created a template for multiple business cards on a standard 8.5 by 11 sheet. [URL]
However the later versions ... 2.8 cause distortions when I try to print. ( Canon MG 2120) The standard 8.5 by 11 mysteriously converts to 7.997 by 10.349 inches .... and a weird 318.870 ppi appears. This obviously distorts my template and the 2 by 3.5 inch cards become odd sizes. When I open the template in 2.6, it works perfectly.
What has happened to the later version? i can't reset to inches and even using the 2559 by 3300 pixils with the 1050x600 card sizecan't be printed accurately So I'm now creating in 2.8 and opening in 2.6 to get my sizes correctly.
I love the expanded tools for drawing in the 2.8 ... but this feature is a nuisance ... along of course with the terrible sizing scale for the brushes. SO hard to calibrate the smaller and moe common sizes. Another bad feature.
Have I missed some adjustment somewhere. Using the same printer, same download gives two different prints sizes in 2.6 and 2.8.
View 11 Replies
ADVERTISEMENT
Sep 4, 2012
i have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
View 1 Replies
View Related
Feb 28, 2014
I'm trying to lay out an 8x10 cell in LR5. My page is a custom package and set up as an 8.5x11 sheet . When I click to add an 8x10 cell, I only get a cell that is ~ 8x8 and I have to drag the bottom down to 10".
View 2 Replies
View Related
Oct 17, 2013
I want to create a template whereby I can make a series of images that I can save as jpgs, upload to my blog, and people can print them. When they print, I want them to be one quarter of a sheet of paper (fit four to a page).
I tried creating a new image using the "inches" specification and those inches seem to have no bearing on inches in real life once printed.
So then I figured that a sheet of paper is 8.5 by 11 and I want a resolution of 300 dpi.
So 8.5 times 300: 2,550 pixels. Times that by 0.25 to get a quarter of it: 637.5 (which gets rounded to 638 pixels).
11 times 300: 3,300 pixels. Times that by 0.25= 825 pixels.
So I put in for 638 pixels by 825 pixels and 300 dpi. I created my image. I saved it as a jpg at full resolution. I uploaded it to my site and tested out the printing.
It took up most of a sheet of paper. Not even close to being a quarter of a sheet.
View 2 Replies
View Related
Aug 20, 2013
I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
View 3 Replies
View Related
Sep 7, 2012
I'm having problems with gimp 2.8 I've just installed on my new laptop. I'm an artist and use scanned images to colour in GIMP, and in version 2.6 these were displayed with the actual canvas size (A4) and scan resolution. I work with these images and often need to increase the canvas size. In 2.8 the scanned images are displaying with a canvas size around 5 times larger than A4 - I think this is because GIMP is saying the resolution is 72ppi, whereas I scan at 300-400 ppi. My finished jpeg files all display on 2.8 at larger canvas sizes aswell. how to get GIMP to recognize this automatically so that the actual canvas size is shown?
View 3 Replies
View Related
Mar 16, 2012
I have managed to reset the print size for smaller images (7,5 by 5 centimetres) and they have worked fine. But now I need a print 90 mm (9cm) by 150mm (15 cm) and even after unlocking the chain the print comes out at 150 by 115 mm...I've tried it about 50 times now and it's always the same.
View 1 Replies
View Related
Jun 25, 2012
When I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
View 1 Replies
View Related
Oct 7, 2013
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies
View Related
Feb 17, 2011
Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
View 9 Replies
View Related
Mar 8, 2012
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
View 3 Replies
View Related
Aug 18, 2013
Just recently moved to Gimp. I like it but I am struggling. Millions of questions, but to start: How can I alter the resolution of and image without changing its physical size. I am trying to keep to a print size of 7x5", and reduce the resolution to 300pixel/inch. When I go to: 'set image print resolution' and change the X and Y resolution, the 'Print Size' changes with it. I have tried everything I can think of. I have make a new file at the correct resolution and pasted the image in, but the colors in the photos changed, so I dumped that idea.
View 1 Replies
View Related
Jun 25, 2011
My end goal is to have a PDF image that is 13in(h) x 19in(w).
Image / Print Size is exactly 13x19. However, when I print to a PDF printer, and set the page size within the Print Preferences to Custom 13x19, I still get a much larger page than the image is.
I see message boards say to use File / Page Setup and select a Custom Print size. I do not see this as an option.
I've tried saving to PNG and then opening in other programs, but it makes the image much larger, and it affects the set-up.
View 1 Replies
View Related
Jan 9, 2003
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
View 2 Replies
View Related
Aug 18, 2011
I'm trying to print a landscape image but the image is reduced when printed. I open a new A4 sized template and make my image but when it comes time to print the image is smaller on the page than A4. Is there an easy solution to this? I have messed around with orientation both in GIMP and my printer settings, I have used the printers' "fit to page" setting and tried everything I can think of.
View 4 Replies
View Related
Dec 20, 2013
I used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies
View Related
Aug 6, 2010
When I try to set a large page size (13X19) in the print screen from GIMP, it will not go beyond 8 X 11. What do I have to do to set up to print larger. When I do page set up, it always reverts to defaults.
View 4 Replies
View Related
Mar 29, 2012
I have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem. I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
View 2 Replies
View Related
Jul 16, 2004
The rule of thumb for traditional illustration work is to do the original about 1/3 larger than it will be printed to allow for some tightening up. My question is, when working in photoshop at 300 dpi, is there any reason to work larger than the print size?
View 2 Replies
View Related
Apr 13, 2012
I know Photoshop can do this but is there anyway to make the pixel size not change if im messing with the print size of a photo?
View 6 Replies
View Related
Jul 10, 2012
lately I've been started working on Illustrator, since I've always loved the vector pen tool in Photoshop, but I've notice something...
let's say I want to work on an A4 page. I start a new PRINT document, and set the A4 size at 300 DPI. If I do that on Photoshop, I'll get a huge white page that at 100% goes way out my screen, but if I start a document with the same size in Illustrator, I get a page that's smaller than my screen (at 100%).
I guess it's normal because those programs might work in different ways, but I'm concerned about it because this way, in Illustrator a 1pt size brush will always be bigger than in Photoshop.
View 4 Replies
View Related
Dec 15, 2012
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
View 2 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Oct 26, 2013
I go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies
View Related
Apr 16, 2013
If i write a Text in Photoshop CS 6 on a Mac the size of the Font is always wrong. For example: I write a Text in 6 Point which is bigger than a Text in 12 pt. I allready uninstall Photoshop, but i have still this problem. When i transform a textbloc it´s getting worse, seems like the text is getting bigger but the pt stays at the old size
View 4 Replies
View Related
Mar 12, 2005
i use photo shop cs i want tp put text on a sig i was makeing when i send to put it on i could not see it then i set it for 6 pt and the letters where hugh like 1 letter is 338x363 and one know why this is
View 1 Replies
View Related
Oct 16, 2012
When I try to place a picture in photoshop CS6 either from drag&drop in the application window or from the place command, my image gets automatically resized based on the resolution (pixels per inch) of my document.
Example:
I create a new blank document, 1000*1000px @ 300ppi.I have another image that I want to place in the document and this image measures 500*500px @ 100ppi.I then go to File->Place and the image that appears is way too big. In the Info panel, it says that the image is 1500x1500 and the transform settings at the top indicate that the image hasen't been scaled because both width and height are at 100%.If I cahnge my document resolution (no resample) to 100ppi, the image has the right size when I place it.
Is this normal? Because it has never done that with past versions of Photoshop. If it is normal, is there a way I can change this because placing an image based on it's physical (printed) size makes absolutely no sense. 1 pixel = 1 pixel.
View 16 Replies
View Related
Jun 9, 2013
Photoshop is resizing my image and instead of it coming in at about 4" W x 5"H it is coming is at 6" W and 1" H..
View 4 Replies
View Related
Oct 17, 2013
I try Xara Designer Pro X9 and use PDF Export Options with selected objects for page generation (PDF Export Options).
After PDF export done page size is A4 with my rectangle drawing instead page size with my rectangle size. How can I export to PDF selected rectangle with rectangle page size?
View 3 Replies
View Related
Nov 16, 2011
A colleague of mine is having the following problem: He has a dwg file (AutoCAD 2010), with all layouts set to a custom sheet of 8.5" x 13" (215.9 mm x 330.2 mm). When he makes the publish to PDF (that is AutoCAD's default PDF option), he gets all the sheets in a ginormous size: 900 mm x 1,600 mm (35.4" x 63"). See image attached.Picture1.jpg
He keeps asking me the favor to publish it, which I do without problem. I have to say that I am using AutoCAD 2012, but before I posted, I tried using yet another PC runing 2010 and there was also no problem at all.
He is able to publish regular size documents without problem. It appears to be just that one file, but only on his PC.
View 3 Replies
View Related
Mar 2, 2013
I have two pictures and I try to copy a small part of one picture to the other.I did a rectangular selection of 2 cm square of the first picture and copied it but when I pasted it in the other picture the selection was now 4.68 cm square.
I suspect that's because the two pictures have not the same resolution. How can I keep the size of the selection from two pictures of different resolution?
View 1 Replies
View Related
