If i write a Text in Photoshop CS 6 on a Mac the size of the Font is always wrong. For example: I write a Text in 6 Point which is bigger than a Text in 12 pt. I allready uninstall Photoshop, but i have still this problem. When i transform a textbloc it´s getting worse, seems like the text is getting bigger but the pt stays at the old size
View 4 RepliesLight now looks like regular, regular like bold, etc.. I've not stroked the fonts or changed anything in preferences. All was well the last time I set type 2 days ago.As an example this is how Gill Sans Light is setting..And this is how it appears when hi-lighted.
View 5 Replies View Relatedmy font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedI've been using 2.6 and created a template for multiple business cards on a standard 8.5 by 11 sheet. [URL]
However the later versions ... 2.8 cause distortions when I try to print. ( Canon MG 2120) The standard 8.5 by 11 mysteriously converts to 7.997 by 10.349 inches .... and a weird 318.870 ppi appears. This obviously distorts my template and the 2 by 3.5 inch cards become odd sizes. When I open the template in 2.6, it works perfectly.
What has happened to the later version? i can't reset to inches and even using the 2559 by 3300 pixils with the 1050x600 card sizecan't be printed accurately So I'm now creating in 2.8 and opening in 2.6 to get my sizes correctly.
I love the expanded tools for drawing in the 2.8 ... but this feature is a nuisance ... along of course with the terrible sizing scale for the brushes. SO hard to calibrate the smaller and moe common sizes. Another bad feature.
Have I missed some adjustment somewhere. Using the same printer, same download gives two different prints sizes in 2.6 and 2.8.
i created a pdf file a long time ago. the text is written in times new roman regular. now when i open the pdf in illustrator it shows a wrong font. i think the wrong font could be new times romance or something) but if mark the text and change the font from regular in bold, it shows the right font (times new roman bold).
how can i change back the text in times new roman regular?
im using cs4 on win7. already checked the fonts in systemfolder
i use photo shop cs i want tp put text on a sig i was makeing when i send to put it on i could not see it then i set it for 6 pt and the letters where hugh like 1 letter is 338x363 and one know why this is
View 1 Replies View RelatedWhen I try to place a picture in photoshop CS6 either from drag&drop in the application window or from the place command, my image gets automatically resized based on the resolution (pixels per inch) of my document.
Example:
I create a new blank document, 1000*1000px @ 300ppi.I have another image that I want to place in the document and this image measures 500*500px @ 100ppi.I then go to File->Place and the image that appears is way too big. In the Info panel, it says that the image is 1500x1500 and the transform settings at the top indicate that the image hasen't been scaled because both width and height are at 100%.If I cahnge my document resolution (no resample) to 100ppi, the image has the right size when I place it.
Is this normal? Because it has never done that with past versions of Photoshop. If it is normal, is there a way I can change this because placing an image based on it's physical (printed) size makes absolutely no sense. 1 pixel = 1 pixel.
Photoshop is resizing my image and instead of it coming in at about 4" W x 5"H it is coming is at 6" W and 1" H..
View 4 Replies View RelatedI ask someone to design a boxshot in PSD. In the boxshot, there are two text layers. Both text layers use the same font and size. But the actual text looks differently in size in my computer(after installing the required fonts). And the designer said in his computer, these two texts looks in same size.
View 3 Replies View RelatedI create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedI'm having problems with gimp 2.8 I've just installed on my new laptop. I'm an artist and use scanned images to colour in GIMP, and in version 2.6 these were displayed with the actual canvas size (A4) and scan resolution. I work with these images and often need to increase the canvas size. In 2.8 the scanned images are displaying with a canvas size around 5 times larger than A4 - I think this is because GIMP is saying the resolution is 72ppi, whereas I scan at 300-400 ppi. My finished jpeg files all display on 2.8 at larger canvas sizes aswell. how to get GIMP to recognize this automatically so that the actual canvas size is shown?
View 3 Replies View RelatedWe are overlaying a word or two on jpg's. In the settings bar along the top, the font is set to 8pt.That has worked seamlessly, for some time. Suddenly, though the pt setting is not changed, the actual text over the photo is larger - much too large to fit. But changing the pt setting to a lower number still results in something too large.
is the sudden change in outcome, when there has been no change in the setting. And no ability to get a correct font size.This is in Ps CS4, on Mac 10.6.8. I have checked the font in Font Book (Myriad Pro), and no corruption appears for the font.
I try Xara Designer Pro X9 and use PDF Export Options with selected objects for page generation (PDF Export Options).
After PDF export done page size is A4 with my rectangle drawing instead page size with my rectangle size. How can I export to PDF selected rectangle with rectangle page size?
A colleague of mine is having the following problem: He has a dwg file (AutoCAD 2010), with all layouts set to a custom sheet of 8.5" x 13" (215.9 mm x 330.2 mm). When he makes the publish to PDF (that is AutoCAD's default PDF option), he gets all the sheets in a ginormous size: 900 mm x 1,600 mm (35.4" x 63"). See image attached.Picture1.jpg
He keeps asking me the favor to publish it, which I do without problem. I have to say that I am using AutoCAD 2012, but before I posted, I tried using yet another PC runing 2010 and there was also no problem at all.
He is able to publish regular size documents without problem. It appears to be just that one file, but only on his PC.
i have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
I'm trying to lay out an 8x10 cell in LR5. My page is a custom package and set up as an 8.5x11 sheet . When I click to add an 8x10 cell, I only get a cell that is ~ 8x8 and I have to drag the bottom down to 10".
View 2 Replies View RelatedI have two pictures and I try to copy a small part of one picture to the other.I did a rectangular selection of 2 cm square of the first picture and copied it but when I pasted it in the other picture the selection was now 4.68 cm square.
I suspect that's because the two pictures have not the same resolution. How can I keep the size of the selection from two pictures of different resolution?
I have a svg file that doesn't look right when it's opened in Illustrator:
The letter 'k' is a lot smaller for some reason, when in fact all the elements have the same font size.
This is what it looks like in Inkscape, and also what I expect it to look like:
Here is the svg code
<?xml version="1.0" encoding="utf-8"?>
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="3000" height="3000" viewBox="0 0 3000 3000" xml:space="preserve">
<g transform="translate(1289.38 698.88) scale(10.75 10.75)">
<text font-family="'Arial'" font-size="100" font-weight="normal" transform="translate(-117.5 99)">
[Code] ......
The svg looks right to me, and not sure why this happens in Illustrator...but I'm not an expert on svgs and may be wrong.
when I create a template, and start dimensioning, the font size are always set to the default (.2) is there a setting to choose to make the font size relative to the size of dwg so that I do not have to increase the size of the fonts each time I do a dimension or any text.?
View 3 Replies View RelatedWhen I'm printing on CorelDRAW X6, it show me the wrong size and orientation , everything was perfect on CorelDRAW X5 and I'm fully updated. What can I do?
View 3 Replies View RelatedI have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
The icon dispayed on the ribbon for my addin seems to be the large (32x32) icon and i'm not sure how to fix that.
In IV2012 it was fine and i can't find anything in the programming that suggests anything was changed.
Using IV2014 Pro SP1 update 1, Win7-64bit
Come across this really irritating bug in Ps CS6 x64 ... I can't set the size of a text layer - it jumps back to the above size. I have quit and reloaded PS CS6 but the same happens.
It was working OK earlier, but this has started happening - On Win 7x64 with latest PS CS6 update.
I go to Preferences>Interface>Text>UI Font size and change it to Large. After a PS restart, the UI font is large and readable. But after a few PS openings and closings it always reverts back to the default Small size. It never seems to remember my setting.
View 18 Replies View RelatedI was making a poster, and I wanted to make the font go from small to big and be very even + clean. (How to make it look like the 2nd poster)
Here is what i did, (you can tell I used indivdual font size to do the change)
My attempt
Here is what I want it to look like, (Is much more Pro Looking)
Good One
You can see how the 2nd one's name fits much better and looks so much better.
I'm using Photoshop Version 7
I have Adobe Photoshop 8 CS which I've used many times before without a problem. Recently I re-installed Windows XP (which I've also done many times before) and I noticed after re-installing Photoshop I cannot add text to images.
Whenever I try, I am able to select the area where I want to add text but the cursor doesn't appear and the font size is set at 0.01. I try to set the font size higher and it continuously drops back to zero. Oddly though, I am able to add text to images in Image Ready without a problem.
I've tried re-installing Photoshop again, cleaning the registry and temp files between installs and I get nowhere. I've never experienced this problem before and I'm usually the one giving help advice as opposed to getting it but here I seem to have no choice except to swallow my pride and ask. Would it be an issue with the font settings somewhere in Windows or has something perhaps messed up my registry?
when put many text(not too much) on your webpage,
what font size is good, 12pt?
When I try to enter type on a Photoshop CS3 doc, the text is humongous. If I set the font size down to 6pt it still is over 200 pixels high. Anything over 20pt is taller than my monitor.
I never installed the beta CS3, did have CS2 prior to upgrading.
PS CS3 10.0.1
Vista
3 gb memory
When you Right-click on the font size text box a menu pops-up and what is Reconversion? and also other options.
View 4 Replies View RelatedHow do I increase the font size for menus, icons, etc that show on the screen. the default size is so small it is barely readable.
View 5 Replies View RelatedPhotoshop cs6. Just loaded Photoshop, and with my poor eye sight, i need large fonts in my Workspace, tried Edit> Preferences> Interface> ui font size Large, also tried reinstalling Photoshop but no joy.
View 10 Replies View Related