AutoCAD Print / Plot :: Cannot Create Any PDF Over 11 X 17 Size
Sep 14, 2011Trying to create a ARCH D size pdf in landscape orientation and it cuts off the image and places it back in a protrait orientation. 11 x 17 works great.
View 7 Replies
ADVERTISEMENT
AutoCAD Print / Plot :: Size PDFs That Are Not Full Or Half Size
Feb 17, 2011Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
AutoCAD Print / Plot :: Paper Size Filtering
Oct 19, 2011I'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
AutoCAD Print / Plot :: Plotting To Different Printers And Different Size Papers
Mar 13, 2013I am using AutoCAD 2006. I have a set of road plans that is 25 pages long. This means that I have 1 model space tab and 25 paperspace layouts. Each paperspace layout contains 1 viewport that shows a specific piece of my model space drawing. I need to be able to print these 25 layouts to multiple printers at multiple sizes. Specifically, I want to be able to print 11x17 sheets on printer #1, 11x17 sheets on printer #2, and 22x36 sheets on printer #2. I know how to create named page setups so that I can just pick which one I want to use to print.
Problem #1 - When I change from printer #1 to printer #2, keeping the same size (11x17) sheet, the paper moves slightly relative to my viewport that is on the page. Therefore, I have to move 25 viewports (1 on each page) every time I want to print my plans.
Problem #2 - When I change the size of page I want to print, the viewport does not size to the page. Therefore, I have to resize the 25 viewports and re-zoom their contents every time I change the size of paper I'm printing on.
Problem #3 - When I want to change the printer or size of sheet that I am using, I have to go to every layout tab and select the individual plot setup that I want to use. Is there a way to apply 1 named page setup to all layouts at once?
Ideally, there would be some way to link the viewport to dynamically change with changes in the paper location and size, but I'm not sure that's possible.
Again, I am using AutoCAD 2006.
AutoCAD Print / Plot :: Show Only Specific Paper Size
Aug 19, 2011How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies View RelatedAutoCAD Print / Plot :: Publishing To PDF Goes To Wrong Paper Size?
Aug 20, 2013I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
AutoCAD Print / Plot :: Create A PDF File
Oct 15, 2011Whenever I create a PDF file the capital Ms and Ws get "spikey", if that makes sense. I use the simplex font primarily. I have C3D 2012, but this issue has been present back to LD 2009, and maybe farther. Only happens when I make PDFs, not other formats.
View 1 Replies View RelatedAutoCAD Print / Plot :: Publish Create Different PDFs
Jul 30, 2013I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
AutoCAD Print / Plot :: Print / Plot Preview Shows Section Of Drawing
Jan 20, 2012I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedAutoCAD Print / Plot :: Multi Sheet Plotting To Smaller Paper Size
Oct 8, 2013This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
AutoCAD Print / Plot :: HP Designjet 1055cm And Acrobat X - Cannot Change Page Size
Mar 15, 2011Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View RelatedAutoCAD Print / Plot :: Changing Printable Area Changes Paper Output Size?
Sep 28, 2010Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedAutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot
May 21, 2013I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
AutoCAD Print / Plot :: Mac Doesn't Allow For Proper Printing On Their Plot Style Setting
Aug 29, 2013I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
AutoCAD Print / Plot :: Sharing Plot Files 64bit With 32bit Machine?
Aug 21, 2012Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedAutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer
Aug 29, 2011When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
AutoCAD Print / Plot :: 2007 Not Reading Plot Styles Correctly
Jan 17, 2012So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
AutoCAD Print / Plot :: Plot Results From Paperspace Are Different From Model Space?
Jan 17, 2013I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
AutoCAD Print / Plot :: Publish Vs Plot - Image Shifts And Border Cut Off
Aug 13, 2012I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
AutoCAD Print / Plot :: Poor Plot Quality With Aerial In 2012?
Aug 8, 2012I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedAutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview
Sep 1, 2011AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
AutoCAD Print / Plot :: Cannot Choose Plotter In Plot Manager
Jun 25, 2013In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
AutoCAD Print / Plot :: DWG To PDF - Lines Plot As Gray Instead Of Black?
May 9, 2011Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
AutoCAD Print / Plot :: 2004 - Set To Plot To File / How To Change
Aug 14, 20122004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View RelatedAutoCAD Print / Plot :: Application Terminates When Plot Command Is Given
Apr 27, 2012I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt
the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.
AutoCAD Print / Plot :: Layers Turned Off Plot Unless They Are Frozen?
Sep 13, 2013I have a user which we just installed Autocad Civil 3D 2014 on his computer that is running on a Windows 7 64-bit OS. However, he has had the same problem with Civil 3D 2011, 2012, and 2013 ever since we took him to 2011 in September 2011. So, it is not something new. It may have been around before then but my companies common practice back then was to freeze layers with a script file before plotting. While attending a class back in 2010 or 2011, he and his group were told to “do not use FREEZE on layers in Civil 3D” since things frozen did not get updated like they would if they were just turned off. So, they have been using the “ON/OFF” commands on all Civil 3D files since then.
Here is the problem:
A drawing, typical of this and other jobs he does, has a title block which is an xref in paper space and the site plan xref in model space. He can turn "OFF" certain layers from the site plan as viewed from paper space to remove clutter and then go to make a plot. After getting it set up to print and going to the preview the layers he has turned off appear in the preview and if he goes ahead and makes the plot or PDF those layers that were turned off will plot out.
The work-a-round they have been using ever since has been to go back into the file(s) and “FREEZE” the layers that were turned off, make the plots and then go back and “THAW” the layers before ending the drawing.
Things we have tried:
Set Visretain=1
Used the “Publish” command.
Set Layerevalctl=0 or 1
Is there a way to use ON/OFF instead and have the layers NOT plot out? OR, is this something that AutoCAD will not do regardless? Has it always been that way and we have been unaware of it through the past four releases?
AutoCAD Print / Plot :: Delay In Plot Manager Window
Feb 18, 2013I have a network with Windows XP and Windows 7.
Printers: from HP 5000 series to a KIP 3000.
CAD,from 2008 to 2012 versions.ALL of the PCs are having this strange behaviour:Open a drawing, Press File then Plot and..
Scenario 1: if the KIP3000 is online then plotting window comes in few seconds, a normal, decent delay!
Scenario 2: if the KIP 3000 is offline then plotting can be delayed to minutes!!!
Downloaded the drivers from KIP web site, installed and tested, prints fine once the above issue with delay is sorted! I’m guessing that is something built-in CAD, pre-emptive, background checks running for printers status when you attempt to plot to the printer / plotter !
AutoCAD Print / Plot :: How To Adjust Grayscale In 3D Model Plot
Sep 28, 2011I need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....
- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.
because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.
It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like
AutoCAD Print / Plot :: Pixelated Plot Of PDF In File When Printing To PDF
Apr 8, 2010I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
AutoCAD Print / Plot :: 3D Drawing Won't Plot In Black And White Using CTB
Nov 21, 2011We do most of our drawing in 2D – quaint I know, but that’s the way the office works. On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.
The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.
The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.
AutoCAD Print / Plot :: Apply Plot Styles To Drawing
Apr 15, 2013Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies View Related