AutoCAD 2013 :: Plotting Empty Sheet When Full Size Plot
Nov 1, 2012
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
View 1 Replies
ADVERTISEMENT
Oct 8, 2013
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
View 3 Replies
View Related
Feb 17, 2011
Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
View 9 Replies
View Related
Oct 3, 2011
Years ago, there was a program of routine that would plot files to a sheet resembling a photographer’s contact sheet. You would tell it which folder to use and it would print the entire folder. You could tell it how many rows and columns and it would fill up the 8.5 x 11 or 11 x 17 sheet with little images of the files.
View 2 Replies
View Related
Oct 25, 2011
when I select the printer/name: Adobe PDF
under Paper size: the standard Arch sizes are not there...
2013 Civil 3D
View 6 Replies
View Related
Jun 15, 2011
I am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
View 1 Replies
View Related
Oct 31, 2013
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
View 1 Replies
View Related
Mar 13, 2013
I am using AutoCAD 2006. I have a set of road plans that is 25 pages long. This means that I have 1 model space tab and 25 paperspace layouts. Each paperspace layout contains 1 viewport that shows a specific piece of my model space drawing. I need to be able to print these 25 layouts to multiple printers at multiple sizes. Specifically, I want to be able to print 11x17 sheets on printer #1, 11x17 sheets on printer #2, and 22x36 sheets on printer #2. I know how to create named page setups so that I can just pick which one I want to use to print.
Problem #1 - When I change from printer #1 to printer #2, keeping the same size (11x17) sheet, the paper moves slightly relative to my viewport that is on the page. Therefore, I have to move 25 viewports (1 on each page) every time I want to print my plans.
Problem #2 - When I change the size of page I want to print, the viewport does not size to the page. Therefore, I have to resize the 25 viewports and re-zoom their contents every time I change the size of paper I'm printing on.
Problem #3 - When I want to change the printer or size of sheet that I am using, I have to go to every layout tab and select the individual plot setup that I want to use. Is there a way to apply 1 named page setup to all layouts at once?
Ideally, there would be some way to link the viewport to dynamically change with changes in the paper location and size, but I'm not sure that's possible.
Again, I am using AutoCAD 2006.
View 2 Replies
View Related
Feb 4, 2013
I have a canon ipf605 plotter. I try to plot to a custom paper size with the "plot transparency" and it doesn't work.
View 3 Replies
View Related
Apr 4, 2013
exported all my user files and plot files and profile into new version of autocad 2013
now when i print a document instead of getting a monochrome plot setting it gives a greyscale affect even though using the monochrome plot file
obviously checked the plot file to see if its set correctley
this has occured on more computers around the office which is making me think it might not be the autocad
View 4 Replies
View Related
Nov 12, 2013
I have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
View 3 Replies
View Related
May 26, 2013
I got the CAD file 18 MB in size although I do audit, purge, recover, wblock but cannot fix this. The problem was resolved when i created new file in ACAD 2011 and copy all information to.
I mean ACAD 2013 may contain something affect to file size.
Here is the file's link [URL]
View 9 Replies
View Related
May 25, 2011
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies
View Related
Mar 5, 2012
When in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
View 3 Replies
View Related
May 14, 2012
Using someone elses template. When I plot to PDF the layout sheet name is not the PDF plot file name, it uses the drawing file name (and hence the same file name for all plots, not what I want). When I plot in paper space, my layout sheet name is the output file name, is there a way to change this?
View 6 Replies
View Related
Dec 7, 2011
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies
View Related
Oct 2, 2013
I'm trying to breath life into an old Sheet Metal template.It starts with the Non-Empty VBA warning.From there, "Run-time error '13': type mismatch
Debugging, here's my screen (attached). I don't know enough about VB to know where there's a problem.
View 2 Replies
View Related
Nov 13, 2012
New hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
View 5 Replies
View Related
Sep 27, 2011
Ive got a A3 drawing all set up to plot to my printer and it works fine.
Unfortunately the same cannot be said when I use the _exportpdf command (or the PDF function in the ribbon):-
- If I export using the current layout then the top and bottom of my title block are chopped off.
- If I change the paper size to A3fullbleed then it does plot the whole drawing, but not to scale (even though its still set to 1:1
- Changing to the other A3 options goes back to chopping off the top and bottom.
From my limited knowledge It appears that the columns need adjusting, trouble is, i'm not sure how?
View 2 Replies
View Related
Jan 30, 2013
I am having trouble plotting the lines from my drawings. From sheet set manager. It plots the image, text and border xref but when the lines start to plot they turn off in task manager from gis all turn to exclamation points. These lines are in the background from gis.
View 1 Replies
View Related
Nov 3, 2011
My colleges and I are having trouble plotting a batch of drawings (Layouts) using sheet sets. We believe that we have set up all the parameters correctly in order to accomplish what we want. First off, we have set up the page set up in each layout properly. We have also set up page set up overrides to plot sheets at different sizes. The problem is that when we send a batch of drawings ( ex: 30 drawings) only the first drawing in the batch gets plotted. We have also tried plotting from the Publish dialog box and still that only plots the first sheet.
Do you think that the problem is at the networked software that the plotter uses? Or is this having to do with additional parameters in the sheet set that I am missing?
View 2 Replies
View Related
Jun 1, 2012
Is there a way to set the Dwg to Pdf.pc3 so that when I hit plot, it "knows" to save the pdf in the bloody folder that the source .dwg file is located....I can see how to set it to 1 single default folder in Options ( i.e. my main Clients folder) but really, how to get to to plot to the source folder..... has got to be less than 1/2 hours worth of coding....I get pretty tired of browsing/scrolling etc to where I want the pdf to end up.
View 2 Replies
View Related
Nov 15, 2011
I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies
View Related
Dec 9, 2011
My computer crashed. Fixed it, but when I use "Cutewriter" now, it doesn't show
the different line weights.
it seems that it doesn't pick up the different weights.
View 9 Replies
View Related
May 7, 2012
am using ACAD2008 on windows XP. I have just started having this problem that if I choose to plot from a window the plot dialogue box locks up after the window is selected and the command line is still asking for the corners of the window to be selected. But everything plots ok if I use extents.
View 2 Replies
View Related
Sep 21, 2011
We use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
View 6 Replies
View Related
Apr 30, 2013
We've got an HP Designjet 455C attached to an SBS 2003 computer.
From Autocad, I can print when I set the page size to A4 - as expect, it prints a nice A4 sized plot on the A1 width roll. But if I try to print full size plots, nothing happens; the document spools, but the printer does nothing.
It must be something to do with paper size or orientation, but I can't find what. I wondered if there was anything well known I should try (I'm not that familiar with Autocad - yet).
Part of the problem was inconsistency.. sometimes test documents would print, and then they wouldn't! I also got one which seemed to print at the right size, but was only printing part of the file content. These are existing Autocad files, with a printer that has been working in the past.
View 9 Replies
View Related
Aug 9, 2011
I am using the monochrome plot style and plotting to PDF. My text looks great in the Plot Preview, but once actually hit 'Plot' the line weight of my text and dimensions appears super thick and heavy. They are also assigned to the lightest line weight in the layer property manager.
View 9 Replies
View Related
Apr 22, 2013
Two of our computers have windows 7 and we are unable to publish or if we plot we have to wait until that page is completed before sending another page otherwise only some the information shows up when printed (ie. no dimensions or no title block). This does not happen on the other computer in the office which still has windows XP.
View 2 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Apr 23, 2012
I have 64 bit machine, Windows 7, kipp plotter, and two sharp printers.
When I send a sheet set manager plot to any of my output devices I get an autocad error. That boots me out of Autocad. I have used this in the past with 32 bit machine, Windows XP , kip plotter and two sharp printers and have had no issues. It worked great.
View 1 Replies
View Related
