I got the CAD file 18 MB in size although I do audit, purge, recover, wblock but cannot fix this. The problem was resolved when i created new file in ACAD 2011 and copy all information to.
I mean ACAD 2013 may contain something affect to file size.
Here is the file's link [URL]
I have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
Currently have a template setup which we use and when everything is erased, purged, audited etc and the file literally cannot be purged any more the filesize is still 10mb.
There however several hundred items in the "Blocks" section of the purge dialogue box under "View items you cannot purge"..how do you get rid of these?
we have files containing hardly anything which are 20mb and empty files which are 10mb,
The user has Autocad 2014 64 bit Service Pack 1 running over Windows 7 Pro. Everything is working fine until she receives .dwg files from a supplier that uses Autocad 2010. When she opens those files, the screen is empty, no crash/freeze, no error message, just a black background. The other opened files are still there in the background.
The only way she can open the file is by asking a colleague, also running Autocad 2010, to open the file and convert it using the WBLOCK command. After the conversion the Autocad 2014 user can open the file without issues.
I have a simple angle iron (3 x 2 x 1/4 w/t x 3.00 LG.) .ipt that has 8 thru holes in it file size is 962 MB the file will not open however 3 days ago the file was normal size (160-180KB) and opened fine when i attempt to open this file it eats up about 8 gig of RAM then gives me PmBRepSegment in database then aborts the open process but Task Image Inventor.exe retains the 8+ gig of memory as if a file is open, what caused this file to grow 900 times in size when nothing was done to it?
View 4 Replies View RelatedThis problem transfer from one file to another by copying some of it's content to another file. Any command were done just to try to reduce a file but still isn't working.
The problem became serious when each file became at-least 200mb per 2D dwg. Our Tech support said it was a kind of Number virus where it alters the log in each file to have a bigger file size.
Though this happens only in CAD, and certain files/projects were affected. The old and previous file unused where still intact. Only those new ones that we are currently accessing.
I have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
View 2 Replies View RelatedI've been working on 3D models and noticed when i take a circle and extrude it along a path (usually a spline) it adds a lot to a file size. The objects are used as electrical conductors on power poles. After a few city blocks of this the model file size becomes basically unusable.
So my question is why does extruding a circle along a curved path increase the file size so drastically and is there another alternative to keep the file size down?
when i bind the xref's the file size is increasing up to 50mb. the size of the file before binding is 4.5mb. i tried all the options whic ppl given in the discussion here. purged(all regeapps,zero txts etc.),wblock even some lisps. but all in vain. even i tried to audit but it took 2hrs and nothing happened. this dwg containing only lines poly lines, blocks, txts etc. no images and not even dence hatches also. 1500 drawings like this. i have to submit the softcopy soon.
View 8 Replies View RelatedI have a file that doesn't have a lot of stuff in it, but the file size seems to be quite large in proportion. Is there a way that I can use DBList, and export the data to a spreadsheet? It would be a lot easier to search through than the F2 way.
View 4 Replies View RelatedLast month, I was drafting a simple 2d floor plans for my school assignment but the cad file size became huge and started to crash. After consulting my lecturers, I did a few things to attempt to solve the overly huge file size.
1. Redrew the drawing from scratch
2. Purged both old & new drawings
3.Auditted both old & new drawings
4. Saved each floor plan as a separate drawing so as to reduce file size
However, the same problem occurred and the new drawings also became too huge & slow to work with.
I have successfully printed a dwg to a pdf but instead of its file size being 450k it is 1.4 m. This makes sending pdfs via email too cumbersome. It seems that even though the outcome is B&W somewhere along the line "it" thinks it is Color. I noticed that in Page Setup I no longer have the option of "DWG to PDF.pc3".
View 5 Replies View Relatedwhen I right click Parts List entry in prospector (Pipe Network) the Network Parts List dialog box appears. I then, as instructed, right-click on the parts list entry and add part family which appears under parts list heading (PVC) upon expanding. Right-clicking PVC and selecting "Add part size" brings up an empty Part Size Creator dialog box.
Additionally, as the book states, I navigate to the htm file that you should be ablr=e to view the parts in and my browser window is blank except for the 2 frames. This is in c:Program Data....enuPipes CatalogUS Imperial Pipes.
C3D 2013
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
By working in millimetres instead of metres will slow things up with my file. My 0,0 point refers to the actual survey co-ordinates which I need to continue to use as regularly share my file with the surveyor and we need to be working on the same 0,0 point. Because I am working in mm 0,0 is therefore further from my drawing that it would be in m. Will changing to metres make a significant difference to me? My file has 34 layout pages and even more viewports which I would have to re scale if I changed the units in my drawings or is there a simpler way of doing this than rescaling the drawing by a factor of 0.001?
View 4 Replies View Relatedfile info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View RelatedI have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
When in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
Can I place an empty .ipt file into an assembly then start working on it?
Or do I have to create the new part, save it, then go into my assembly and place it?
Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
I have 2 files I can't open. I've tried everything! The warning says the file is empty, but in the preview I can see the image of the layered file.
View 14 Replies View RelatedI have a problem with CD X4 : when I create a new file, totally empty, and save it, the file size is 2.7 Mo !I deleted all styles (colors, graphics, texts) and the problème is the same.I reinstall the software and the problem is the same.
View 5 Replies View RelatedI tried to start Photoshop 5.1 64bit today, and it shows the blue intro screen with the reading and loading, and then it goes to a popup error message that reads, "Could not initialize Photoshop because the file is empty." I can run the 32bit version fine, but I would prefer to use the 64bit version. I am running Windows 64bit Ultimate. I have been having issues here and there with CS5.5 on this computer. I ran CS4 fine for the last few years, but since after the upgrade, things have been acting weird. About two weeks ago, InDesign refused to work, so I did a reinstall. Then, two days later, I was having other issues, so I did another reinstall. Before that, Illustrator was having issues, so I had to copy programs files from my office computer to my home computer to make it work. I am starting to wonder if my hard drive is going out. Is there an Adobe fix for just Photoshop? I have the CS5.5 installation DVDs here. I tried copying the Photoshop.exe from my office computer to my home computer and replacing it, but it didn't work either.
View 1 Replies View RelatedI'm using CorelDraw X4 on a Windows Vista Home Basic System. Trying to "Publish to PDF" produces empty PDF Files, with a page size of 0 mm x 0 mm. The original File has a layout of (German) A4 and a textbox with "Test".
There are no error messages.Even using a PDF Printer (FreePDF XP) doesn't produce a file, but gaves the error message
"%%[ Error: undefined; OffendingCommand: -0,15789 ]%%GhostScript Error 1. Error, no PDF file produced! (False)".
I'm a web developer currently slicing an illustrator file for web graphics. Some of the icons and images have shadows, lights, etc, and it's impossible to simply see by a naked eye which pixels contains some shade or nearly transparent color and which doesn't.
It would be extremely useful if I could somehow easily differentiate between empty and non-empty pixels, so I wouldn't miss any when slicing.
All my efforts to make PDF files has failed. I get empty PDF files, and I have tried almost all variations of settings.
View 14 Replies View RelatedWhen I usually work with corel, I export my files in .png when I finished working so that I can use them in Power Point or whatever. It was never a problem and still works with most of my files, but I have now one file that simply doesn't want to be converted.
I export it like usual (--> export --> .png) but than in the preview it shows me nothing but an empty bar-like part of the file, so basically nothing. The .png file that is created it empty.
I used photoshop element 9.. I was just finishing my flyer for a client. When I went to click save and was waiting for the save to complete, the photoshop just disappear and when I open it back up PSE9 and went to look for my file, I was working on it say This is not a vaild Portable Document File??? I dont want to start over from scratch Is there any way to recover the file?
View 3 Replies View RelatedI was trying to change the copyright information on a few photos in PS, but every time I open the File Info dialog (ctrl-alt-shift-i) the dialog comes up empty and hangs photoshop. Even if I open PS with a new document and try to open File Info, it still hangs.
Here's my version:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
PSE 11 catalog but when I try to restore it it says it's empty. I can open the folder/files on my hard drive but the restore function says it is empty.
View 1 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.