AutoCAD Civil 3D :: Part Size Creator Dialog Empty?
May 8, 2013
when I right click Parts List entry in prospector (Pipe Network) the Network Parts List dialog box appears. I then, as instructed, right-click on the parts list entry and add part family which appears under parts list heading (PVC) upon expanding. Right-clicking PVC and selecting "Add part size" brings up an empty Part Size Creator dialog box.
Additionally, as the book states, I navigate to the htm file that you should be ablr=e to view the parts in and my browser window is blank except for the 2 frames. This is in c:Program Data....enuPipes CatalogUS Imperial Pipes.
C3D 2013
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
View 9 Replies
ADVERTISEMENT
Jan 4, 2011
If I change the size of, say, the "file open" box, and shut it down, then open it again, it goes back to the default small size. Is there a setting that I can change so that the dialog box size stay's to my selected size?
View 9 Replies
View Related
Jun 20, 2013
I made a prompted entry, for example, in a sketched symbol,again, for example.
Now i edit the text and want to write a static text, not a prompted entry and none from that list, but i cannot get the empty, white, window, like in the picture, and like when i start a new text.
I am forced to choose only from the list.
View 2 Replies
View Related
Mar 12, 2012
When i am laying out a storm sewer pipe network with structure sizes that vary i notice no matter what the structure size it always appears the same size in plan view. How to fix this or is this one of those things that its always shown the same size for all and only different in profile view.
View 2 Replies
View Related
Feb 5, 2013
I was trying to change the copyright information on a few photos in PS, but every time I open the File Info dialog (ctrl-alt-shift-i) the dialog comes up empty and hangs photoshop. Even if I open PS with a new document and try to open File Info, it still hangs.
Here's my version:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
View 18 Replies
View Related
Nov 12, 2013
I have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
View 3 Replies
View Related
May 26, 2013
I got the CAD file 18 MB in size although I do audit, purge, recover, wblock but cannot fix this. The problem was resolved when i created new file in ACAD 2011 and copy all information to.
I mean ACAD 2013 may contain something affect to file size.
Here is the file's link [URL]
View 9 Replies
View Related
Nov 1, 2012
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
View 1 Replies
View Related
Jun 10, 2013
Is it possible to search & find where a dimension listed in the parameters dialog occurs in a part model ( in which sketch for example)?
Inventor Suite 2013 Ultimate
View 1 Replies
View Related
May 19, 2011
I have recently installed "Autodesk Product Design Suite Premium 2012 English Win 64bit"., and now I would like to create thru "Make Part" feature an assembly in which I am using in the previous version 2011. The feature options are not working.Step to re-create:
1. Manage Tab > Make Part
2. Under "Place part in target assembly" click the Folder button on New File Location
3. A "Component Properties" dialog box will appear. Now, click "YES" or "NO" button, dialog box closes.....
PC Configuration:
Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2
Memory: 8GB RAM
Processor: Intel(R) Pentium(R) III Xeon processor (4 CPUs), ~2.8GHz
Video Graphics: NVIDIA Quadro FX 1700
Display Memory: 512.0 MB
DirectX Version: DirectX 9.0c
View 9 Replies
View Related
Jan 11, 2012
Recently installed 2012 on new computer. Single license user. Open tool pallet and no sub assemblies, only symbols and such. I am able to view a long list of sub assemblies, but cannot get them to the tool pallet. Have tried drag and drop with no success.
View 2 Replies
View Related
Jul 29, 2013
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
View 5 Replies
View Related
May 11, 2012
I've got a Dell Vostro running windows 7. (new system) I've installed Civil 3D 2013. if I use a command that opens a dialog box with drop down boxes when opening the drop down box it will not populate until I move the cursor into the drop down area. Also radio boxes and check boxes do not show changes in selection until I move the location of the dialog box on screen causing it to refresh. I've contacted Autodesk, Dell, and NDIVIA (video card) no one seems to have any Ideas. It works fine in diagnostic mode.
View 8 Replies
View Related
Aug 17, 2013
I am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies
View Related
May 30, 2012
I have a Drawing that I have been developing as a control/template for surveying purposes. In compiling it I have acquired some empty blocks from another drawing I picked some data from. They are not being used or referenced by anything in the drawing and yet PURGE does not get rid of them. Is there another method I can use?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
View 1 Replies
View Related
Oct 10, 2013
i have one dll i been making for many years with many programs inside. works fine and all. however when i close civil 3d i get the following message box (see attached)
i checked the load civil 3d app and release stuff no msgbox mentioned. all commented out.
Public Function RunCvl() As Boolean Try Try oAcadApp = Application.AcadApplication oAcadDoc = oAcadApp.ActiveDocument Catch ex
[Code].....
View 1 Replies
View Related
Oct 18, 2012
“Creating multiple section views” introduces empty section views?
I’m wondering the reason for which the generated section views are empty!
View 1 Replies
View Related
Oct 22, 2013
I have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
View 9 Replies
View Related
Mar 28, 2011
I'm using AutoCAD Architecture 2012 and Windows 7 Professional x64. Is there a way to change the default sizes of various dialog boxes? When I use the File Open dialog box, for example, I always want it to be bigger so I drag the corner to enlarge it, but the next time I call it it's back to the same default size. Can I drag it to a new size and make that stick, a variable set differently perhaps, or is something more sophisticated involved?
View 1 Replies
View Related
May 30, 2013
When I open a new drawing, the open dialog window stays the same size which is usually too small. I have to resize it every time I open a drawing.
View 3 Replies
View Related
Dec 31, 2013
I tried to add a part size in part builder but the dwg wouldn't save or update. It was write protected or something. How can I get around this?
View 4 Replies
View Related
Nov 5, 2013
Is there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
View 2 Replies
View Related
Oct 3, 2012
When trying to etransmit a dwg from Civil 3D 2010 which has line/curve tags with tables built from them, we are getting output which has the table headers but no entries below. The cad user on the other end gets no line/curve data. The other user is on Civil 3D 2011.
View 5 Replies
View Related
Oct 28, 2011
I need to increase the size of a fixed dialog box so I do not have to use the horizontal and vertical scroll bars to see the contents, I have included a picture.
View 3 Replies
View Related
Feb 22, 2012
Among about a dozen ACAD users in my office, one is missing the "Arch D (landscape)" paper size that accompanies the PC3 file we generally use. I have checked that the roll size and other settings in the machine in question and all of that looks good. I don't want to edit this PC3 as it works for everyone else and don't want to create a new PC3 for this one user.
View 2 Replies
View Related
Aug 2, 2012
Having problems with the updated new file dialog and I'm not talking personal problems. I switched it to detail view and widened up the name column so I could see the whole name. I could actually live with that setup however the next time I opened the new file dialog all the columns returned to their default size and the sort also reverted.
Is it just me or does the new file dialog not remember any changes to it's layout?
View 2 Replies
View Related
Jul 23, 2012
We have our pipe networks set up in our template. But in actual use, we don't use them in every project. Even in a project where we're using them, they will be d-ref'd around, so I don't need the actual network set up in each drawing.
I was deleting my unused, empty pipe networks from a drawing (to reduce file size and to avoid getting the "8 Objects not selected" dialogue when using quick select.)
I deleted 3 or 4 networks, then on the next one I got this message:
C3D was apparantly not content with merely informing me once of this interesting fact. No, the message was obviously considered so important that it had to be repeated. Many many times, for emphasis. So many times, that after I'd keept my finger on the Escape key for a minute or two, the program still felt that I needed to see this important dialogue box.
I used Task Manager to get out of the program.
View 6 Replies
View Related
Nov 18, 2013
Whenever I bring up the crop tool I see a dialog box covering part of the image. I never use it. Is there a way to hide or get rid of it?
View 3 Replies
View Related
Oct 31, 2013
I'm a web developer currently slicing an illustrator file for web graphics. Some of the icons and images have shadows, lights, etc, and it's impossible to simply see by a naked eye which pixels contains some shade or nearly transparent color and which doesn't.
It would be extremely useful if I could somehow easily differentiate between empty and non-empty pixels, so I wouldn't miss any when slicing.
View 2 Replies
View Related
Nov 7, 2012
USING MAC, CS 5.5: When I open the image size dialog box -- as well as the canvas size box -- for any file; new or existing, and try to change the size, the box either won't let me change the number, or it closes out. Doesn't scrash the app; just refuses to cooperate.
View 4 Replies
View Related
Aug 23, 2013
When using the image size dialog, regardless of the zoom amount or the size of the dialog I have no ability to pan around the image in the preview window.I have the hand available to me and clicking on the preview shows before and after variations but no panning. The main image behind the dialog does pan whenever I try panning in the preview window.
View 1 Replies
View Related
