Recently installed 2012 on new computer. Single license user. Open tool pallet and no sub assemblies, only symbols and such. I am able to view a long list of sub assemblies, but cannot get them to the tool pallet. Have tried drag and drop with no success.
View 2 RepliesWhen I open up Cooridors/Sub Assembly Tool Pallets all the imperial and metric sub assemblies are missing.
View 2 Replies View RelatedIs it possible to add a command, say 'laymcur' to a tool pallet ?
View 4 Replies View RelatedI'm using ACA 2008 and recently had to have some things reconfigured on my computer by our IT guy because of a few problems. Because of that, I've had to fix a couple of things with my settings in ACA to get it back to what I had before.
One thing that changed that I can't seem to fix is a custom catalog for my tool pallet we have always used that wont come up with my standard ACA pallets when I start up ACA. I have to hit cntrl+4 to bring up the catalog library and from there I can see the one I want to use. I grab the eyedropper and drag it to the tool pallets and it works fine, but when I close out ACA and restart it's gone again.
How can I get it to stick permanently?
I created a file with all the blocks that I use of horn/strobes and strobes only for fire alarm systems and made a tool pallet. I've had to edit and tweak them until they fit my needs but now when I opened autocad my tool pallet was gone so I made another one but now my blocks are not the new revised blocks but the old ones. I double checked the path for the file and it's correct. When I open the file containing the blocks they look and behave like the blocks I revised.
View 1 Replies View RelatedHow do I load my .xtp hatch file from Arch 2008 into my Arch 2011 tool pallet?
View 9 Replies View RelatedAuto cad 2006 and 2012; after loading commands from tool pallet The keyboard function Ctrl+Z function is not working.This error is happening all computers.
View 6 Replies View RelatedEvery time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedThe tool pallets in all my Creative apps Photoshop, Illustrator and Indesign have just stopped working, ie the secondary hidden tools do not appear when you click on the tool, so I am unable to access the other tools. Seems like it should be something pretty simple, but it is eluding me,
View 3 Replies View RelatedI will create a great tool palette setup. Close AutoCAD MEP 2012. Open it up. All groups are still there, but they're empty. All content is still in the content browser, but my palettes are empty.
View 2 Replies View RelatedMy tool bar is empty? i can not drag, crop, add text....
View 4 Replies View RelatedI had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
I've got a Dell Vostro running windows 7. (new system) I've installed Civil 3D 2013. if I use a command that opens a dialog box with drop down boxes when opening the drop down box it will not populate until I move the cursor into the drop down area. Also radio boxes and check boxes do not show changes in selection until I move the location of the dialog box on screen causing it to refresh. I've contacted Autodesk, Dell, and NDIVIA (video card) no one seems to have any Ideas. It works fine in diagnostic mode.
View 8 Replies View RelatedI have a Drawing that I have been developing as a control/template for surveying purposes. In compiling it I have acquired some empty blocks from another drawing I picked some data from. They are not being used or referenced by anything in the drawing and yet PURGE does not get rid of them. Is there another method I can use?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
i have one dll i been making for many years with many programs inside. works fine and all. however when i close civil 3d i get the following message box (see attached)
i checked the load civil 3d app and release stuff no msgbox mentioned. all commented out.
Public Function RunCvl() As Boolean Try Try oAcadApp = Application.AcadApplication oAcadDoc = oAcadApp.ActiveDocument Catch ex
[Code].....
“Creating multiple section views” introduces empty section views?
I’m wondering the reason for which the generated section views are empty!
I have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
when I right click Parts List entry in prospector (Pipe Network) the Network Parts List dialog box appears. I then, as instructed, right-click on the parts list entry and add part family which appears under parts list heading (PVC) upon expanding. Right-clicking PVC and selecting "Add part size" brings up an empty Part Size Creator dialog box.
Additionally, as the book states, I navigate to the htm file that you should be ablr=e to view the parts in and my browser window is blank except for the 2 frames. This is in c:Program Data....enuPipes CatalogUS Imperial Pipes.
C3D 2013
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
When trying to etransmit a dwg from Civil 3D 2010 which has line/curve tags with tables built from them, we are getting output which has the table headers but no entries below. The cad user on the other end gets no line/curve data. The other user is on Civil 3D 2011.
View 5 Replies View RelatedWe have our pipe networks set up in our template. But in actual use, we don't use them in every project. Even in a project where we're using them, they will be d-ref'd around, so I don't need the actual network set up in each drawing.
I was deleting my unused, empty pipe networks from a drawing (to reduce file size and to avoid getting the "8 Objects not selected" dialogue when using quick select.)
I deleted 3 or 4 networks, then on the next one I got this message:
C3D was apparantly not content with merely informing me once of this interesting fact. No, the message was obviously considered so important that it had to be repeated. Many many times, for emphasis. So many times, that after I'd keept my finger on the Escape key for a minute or two, the program still felt that I needed to see this important dialogue box.
I used Task Manager to get out of the program.
I'm a web developer currently slicing an illustrator file for web graphics. Some of the icons and images have shadows, lights, etc, and it's impossible to simply see by a naked eye which pixels contains some shade or nearly transparent color and which doesn't.
It would be extremely useful if I could somehow easily differentiate between empty and non-empty pixels, so I wouldn't miss any when slicing.
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies View RelatedI use 2013. The xref pallet was docked but has disappeared. Also, when I type 'xref' at the command line, the xref dialog box does not appear. How do I get them back?
View 2 Replies View RelatedMy company have decided to use plain autocad as the base instead of Civil3D. Since this been done im missing information in the properties pallet.
The information im interested is shown in attachment properties 1 (This is from Civil3d). In the properties pallet in plain autocad this information is missing se attachment Properties 2 (From plain autocad).
Is there any way to reach this information in plain autocad. This is in autocad 2014.
Having just installed AutoCadArchitecture 2013 last week, I've been fairly successful in fixing most of my "issues".
When I dbl. click on a line, polyline, etc, I have it set up to open the Properties Pallet, (not the quick properties box). Problem is, the first time I dbl.click on a no object it opens the Properties pallet no problem, but the second time i dbl click an object, the properties pallet completely disappears from the screen. When I dbl click the object a 3rd time, the pallet comes back. I have it set to auto-hide, but not disappear. How do I get to use the dbl. click feature to open the properties pallet every time?
In Autocad Architectural 2012 if I typed 'wall' I would get several options for walls. If I selected 'A' (add) it would bring up the properties panel and draw the necessary walls. This does not work in Architectural 2013. Where to I access the wall/window/door pallet?
View 4 Replies View RelatedI'm using Photoshop 7.0 and somehow managed to move the "movement bar" at the top of the color pallet off of the visible screen. I also moved to "okay" button off. By the "color pallet," I mean the box that comes up when I click on the currently active color to try and change it. How do I move the box back on screen? I've tried changing the resolution on my computer, but no dice.
View 1 Replies View RelatedHow can I make the Pallet circular and not square or rectangle?
View 1 Replies View Related I’ve noticed a trend in photos altered to be used as wall art. You can see an example here
[URL].......
or here
[URL]...........
I would like to know what techniques I could try to get similar color pallets. Or if I found a color pallet that is interest me how can I adjust the colors in my photographs to match the color pallet?