AutoCAD Civil 3D :: Export To DGN - Creating Empty File
Oct 22, 2013
I have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
View 9 Replies
ADVERTISEMENT
Jul 29, 2013
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
View 5 Replies
View Related
Feb 4, 2013
i have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies
View Related
May 18, 2012
a tip for solving the problem of exporting an image as a tif led to another question. One solution to export as tif was to create a macro. See that solution post here: [URL] .......
It says : Step 1Run the built in macro. (Tools > Macros > Run Macro). In CorelDRAW versions prior to X4 (Tools > Visual Basic > Play). Select ‘File Converter’ macro from the ‘Macros in’ list and click ‘Run’
However in my macros drop down there are no macros. how can I get a file converter macro?
View 2 Replies
View Related
Oct 7, 2013
I'm trying to create a profile from a txt file but I keep on getting this error message ''chainage XX+XXX.XX either outside of alignment limits or within gap created by a chainage equation'' . The txt file has chainage and elevation and the formatting is OK, so I don't get what the problem is.
View 8 Replies
View Related
May 29, 2012
I´m having problem with creating stl file from surface. I need to import stl in another program for rockfalls.
I have create surface from contours, then extract faces, extrude them, union and I got solid..
I have export solid like stl file... But in another program my surface is not smooth, like somethning went wrong while exporting stl, because in autocad civil 3D 2012 everything looks good.
I have found out how I can increase facetres to 10, but It has not affect to my stl file. If there is some another parameter for better resolution of stl files?
View 2 Replies
View Related
Jul 22, 2013
How to export shp file to txt,,,i want to x,y,z format from shp file.,,
View 6 Replies
View Related
May 20, 2004
I know how to do it in Fireworks, but want to use PS to achieve the task ... so basically want to create an empty box, circle or whatever shape with a border x pixels wide.
The way I do it right now is to make a black rectangle, then fit a smaller white rectangle inside it, and delete the overlapping black area, that leaves me with just an outline of whatever width I choose.
View 3 Replies
View Related
May 19, 2004
how to do it in Fireworks, but want to use PS to achieve the task ... so basically want to create an empty box, circle or whatever shape with a border x pixels wide.
The way I do it right now is to make a black rectangle, then fit a smaller white rectangle inside it, and delete the overlapping black area, that leaves me with just an outline of whatever width I choose.
View 1 Replies
View Related
Nov 13, 2012
I´m trying export to dwg, and I can see all the process, but the export file is not saved.
I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.
View 9 Replies
View Related
Mar 12, 2013
I cannot find a function in 2011 Civil 3d to export an alignment as an. RXL file onto the computer. I know that I can export an RXL directly into a Survey Controller via Trimble Link.
View 3 Replies
View Related
Jan 13, 2010
I am able to export to SDF but I get nothing when trying to go the two shp formats available. was a "parcel", but i exploded to polyline.
Do i need a patch to make this work? I am a C3D newbie and am struggling wit h user interface, but know that map export command line looks like it is supposed to work.
View 5 Replies
View Related
Nov 15, 2013
When a new Civil3D file is created, there are some blocks available for insertion when I type "Insert". So these are the preloaded blocks defined by Civil3D. I was wondering if I can define my own blocks and have them automatically loaded when creating a new file?
View 5 Replies
View Related
Apr 19, 2013
I want to export my slope - table - legend to an excel or txt file.
(Of course only the values)
Civil 3D (2013)
View 2 Replies
View Related
Jul 18, 2013
I am trying to export polylines as a shape file. When I use the mapexport command, it asks me to save the file but the dialog box does not open after I name and save the shape file. How do i get this dialog box to open so I can use the map export command? I have Civil 3D 2014.
View 1 Replies
View Related
Jul 24, 2013
I need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
View 3 Replies
View Related
Jun 21, 2012
i need to export 7 million points from a tin surface to text file with only NEZ in comma delimited format for Surfer 9 software. right now i have the civil 3d surface. but the export to csv stock reporting tool sucks. why the hell do you open the file and why leave an empty row between data points? so it's not usable.
also i have 12gb ram at work and it can't export surface points to autocad format ran out of memory. this is with surface display showing points and just the "dot" style so it's autocad points after export. i was originally planning on using "dataextraction" command in autocad to export to csv. worked on a small batch of file. so i think may work for the bigger file. but i would never know because i can't even get the points into autocad.
also yeah i would love to simplify the surface but it's so buggy that you asked it to remove 80% of the points it only remove 100k points at most out of 7 million. so not usable.
last resort is i can program something in vb.net but not much motivation on doing so.
View 9 Replies
View Related
Jan 10, 2014
Is it possible to export a TIN file so a GIS user can use it with some Carlson software? He's having trouble using .XML's or DEM's. If I could find where ACAD stores the .TIN file for my surface, I'd just send that to him.
View 3 Replies
View Related
May 30, 2012
trying to create contours from an exiting survey file. I am new to Civil 3d 2012. What I need to accomplish is create a 3d topo from the points with contours and then create a 3d model of the area.
View 9 Replies
View Related
Apr 13, 2012
I am trying to utilize Trimble's ability to export Points to an XML file. The XML file contains some additional Attribute data. I have created the new Point UDP's and also Created a new Point File Format. Here lies the Problem, when I go to the Insert Tab in the Ribbon and pick import from XML. It gives me no choices to select a Point File Format? It just imports the file with just PNEZD data only, and not my additional Attributes.
View 7 Replies
View Related
Jan 11, 2012
Recently installed 2012 on new computer. Single license user. Open tool pallet and no sub assemblies, only symbols and such. I am able to view a long list of sub assemblies, but cannot get them to the tool pallet. Have tried drag and drop with no success.
View 2 Replies
View Related
May 11, 2012
I've got a Dell Vostro running windows 7. (new system) I've installed Civil 3D 2013. if I use a command that opens a dialog box with drop down boxes when opening the drop down box it will not populate until I move the cursor into the drop down area. Also radio boxes and check boxes do not show changes in selection until I move the location of the dialog box on screen causing it to refresh. I've contacted Autodesk, Dell, and NDIVIA (video card) no one seems to have any Ideas. It works fine in diagnostic mode.
View 8 Replies
View Related
Nov 13, 2011
when you export any size graphic as a jpg (selected only or not) the dialogue box comes up empty, completely! when i go to close it, it crashes corel. If I tick the donot show filter dialogue box It makes a jpg image but i have no control over the settings. It works when I export to bmp! this is getting frustrating as I often have to jpeg some graphics for customers.
View 11 Replies
View Related
Jul 3, 2013
Currently have a template setup which we use and when everything is erased, purged, audited etc and the file literally cannot be purged any more the filesize is still 10mb.
There however several hundred items in the "Blocks" section of the purge dialogue box under "View items you cannot purge"..how do you get rid of these?
we have files containing hardly anything which are 20mb and empty files which are 10mb,
View 9 Replies
View Related
Jun 23, 2013
file info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies
View Related
May 30, 2012
I have a Drawing that I have been developing as a control/template for surveying purposes. In compiling it I have acquired some empty blocks from another drawing I picked some data from. They are not being used or referenced by anything in the drawing and yet PURGE does not get rid of them. Is there another method I can use?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
View 1 Replies
View Related
Oct 10, 2013
i have one dll i been making for many years with many programs inside. works fine and all. however when i close civil 3d i get the following message box (see attached)
i checked the load civil 3d app and release stuff no msgbox mentioned. all commented out.
Public Function RunCvl() As Boolean Try Try oAcadApp = Application.AcadApplication oAcadDoc = oAcadApp.ActiveDocument Catch ex
[Code].....
View 1 Replies
View Related
Oct 18, 2012
“Creating multiple section views” introduces empty section views?
I’m wondering the reason for which the generated section views are empty!
View 1 Replies
View Related
Jan 8, 2014
The user has Autocad 2014 64 bit Service Pack 1 running over Windows 7 Pro. Everything is working fine until she receives .dwg files from a supplier that uses Autocad 2010. When she opens those files, the screen is empty, no crash/freeze, no error message, just a black background. The other opened files are still there in the background.
The only way she can open the file is by asking a colleague, also running Autocad 2010, to open the file and convert it using the WBLOCK command. After the conversion the Autocad 2014 user can open the file without issues.
View 3 Replies
View Related
Nov 12, 2013
I have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
View 3 Replies
View Related
May 26, 2013
I got the CAD file 18 MB in size although I do audit, purge, recover, wblock but cannot fix this. The problem was resolved when i created new file in ACAD 2011 and copy all information to.
I mean ACAD 2013 may contain something affect to file size.
Here is the file's link [URL]
View 9 Replies
View Related
