I am able to export to SDF but I get nothing when trying to go the two shp formats available. was a "parcel", but i exploded to polyline.
Do i need a patch to make this work? I am a C3D newbie and am struggling wit h user interface, but know that map export command line looks like it is supposed to work.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedAny way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
i have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View RelatedHow to export shp file to txt,,,i want to x,y,z format from shp file.,,
View 6 Replies View RelatedI´m trying export to dwg, and I can see all the process, but the export file is not saved.
I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.
I cannot find a function in 2011 Civil 3d to export an alignment as an. RXL file onto the computer. I know that I can export an RXL directly into a Survey Controller via Trimble Link.
View 3 Replies View RelatedI want to export my slope - table - legend to an excel or txt file.
(Of course only the values)
Civil 3D (2013)
I am trying to export polylines as a shape file. When I use the mapexport command, it asks me to save the file but the dialog box does not open after I name and save the shape file. How do i get this dialog box to open so I can use the map export command? I have Civil 3D 2014.
View 1 Replies View RelatedI have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
I need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
i need to export 7 million points from a tin surface to text file with only NEZ in comma delimited format for Surfer 9 software. right now i have the civil 3d surface. but the export to csv stock reporting tool sucks. why the hell do you open the file and why leave an empty row between data points? so it's not usable.
also i have 12gb ram at work and it can't export surface points to autocad format ran out of memory. this is with surface display showing points and just the "dot" style so it's autocad points after export. i was originally planning on using "dataextraction" command in autocad to export to csv. worked on a small batch of file. so i think may work for the bigger file. but i would never know because i can't even get the points into autocad.
also yeah i would love to simplify the surface but it's so buggy that you asked it to remove 80% of the points it only remove 100k points at most out of 7 million. so not usable.
last resort is i can program something in vb.net but not much motivation on doing so.
Is it possible to export a TIN file so a GIS user can use it with some Carlson software? He's having trouble using .XML's or DEM's. If I could find where ACAD stores the .TIN file for my surface, I'd just send that to him.
View 3 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedI am trying to utilize Trimble's ability to export Points to an XML file. The XML file contains some additional Attribute data. I have created the new Point UDP's and also Created a new Point File Format. Here lies the Problem, when I go to the Insert Tab in the Ribbon and pick import from XML. It gives me no choices to select a Point File Format? It just imports the file with just PNEZD data only, and not my additional Attributes.
View 7 Replies View RelatedI have been searching for a way of exporting multiple polyline or spline coordinates to txt file and all I can find is ones that write out as a single continuous list of coordinates with nothing denoting which one is which.
I really need it to be able to export each polyline as a group, and I would also love for it to be able to include the number of points and name of the layer e.g. :
polyline 'number of points' 'layername'
0.0 0.0 0.0
1.0 1.0 0.0
2.0 2.0 0.0
polyline 'number of points' 'layername'
0.0 0.0 0.0
1.0 4.0 0.0
2.0 8.0 0.0
and so on.....
I am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies View RelatedI want to dimension along a curvy polyline. I don't want to station it like a centerline. It is for pavement marking dimensions in a curvy road and I want to show the total length of turn lane lines while they go through an s-surve. I could draw the dimensions manually and have in the past. For the contractor, I would simply station and offset it, but it makes it easier for the reviewer to see total turn lane, taper and lane shift lengths, rather than having to calculate them from station and offset callouts.
LT, C3D 2005 - 2014
XP, Vista, 7
Recently my company has changed the standards to label existing utilities with text right above the utilitie lines without leaders. I would like to do automate this process somehow using attributes or something similar to that. I have attached a screen shot of how I would like it to look. The objective is to speed up the labeling process.
View 9 Replies View RelatedI have a point cloud that i want to snap a boundry around its outer limit. Is there some way to do this automaticly? I tried creating a surface and using the maximum triangle length to get a good boundry. For some reason i loose a lot of pionts at the edges with this boundry. I have removed points that represents water so i have a part in the midddle that i want a boundry around.
View 3 Replies View RelatedIn the good old days I would create 3d polylines by elevation to create curb lines and driveway cuts. The command was in the terrain pull down. Has this feature been completely down away with?
View 3 Replies View RelatedI want to create points from the polyline to identify in the field. For example, I create a square for a concrete pad and I want to identify the corners of the pad.
View 4 Replies View Relatedi have just spent 8 hours today trying to find a link that will vary target a poly line that i have set. i cant seem to find the link that will do what i need as per the attachemnt. the section between the edge of the foot path and the start of the fill/cut slope needs to be variable
i know how to set all the targets but this link seems to be a fixed length.
I want to draw a 3D-polyline and wrap it to a surface so that the elevations in the surface aplies to the polyline. With every elevation difference i want a vertrice to be added to the polyline so that it follows the surface perfectly along the polyline length.
View 4 Replies View RelatedHow do you label a polyline with a Z elevation that is not part of a surface? want to label the contours, but they are not part of a surface.
2013 Civil 3D.
Any way to create a polyline linetype that simulates a solid dashed with outer lines (drainage line)?
I could sort of do it with the multiline feature but not what we want. using 2011 civil3D
How i turn a 3D Polyline into an Alignment so i can apply an assembly to it and create a RXL?
View 9 Replies View RelatedHow to convert polyline into alignment?
View 1 Replies View RelatedI am working on laying out data for some survey crews along the centerline of the road. I have a BC and EC elevation, but the vertices along the CL are at different elevations, which were the original elevation of the poly line before being transformed into a 3D polyline. Is there an easy way to make the full line follow the slope from BC to EC other than manually shifting the vertices?
View 9 Replies View RelatedWhat length is shown in properties for a 3D polyline?
A 3D polyline having two nodes at 0,0,0 and 10,0,0 has length of 10.
If I move the second nodes to 10,0,1000 the length is still 10.
Is that the projection in xy-plan?
How to create a minimal DXF file that has polyline. I am using a C# program to create DXF File. Also if i want to hatch a closed polyline what might be the best way.
View 9 Replies View Related
