AutoCAD 2013 :: Empty Screen After Opening A File
Jan 8, 2014
The user has Autocad 2014 64 bit Service Pack 1 running over Windows 7 Pro. Everything is working fine until she receives .dwg files from a supplier that uses Autocad 2010. When she opens those files, the screen is empty, no crash/freeze, no error message, just a black background. The other opened files are still there in the background.
The only way she can open the file is by asking a colleague, also running Autocad 2010, to open the file and convert it using the WBLOCK command. After the conversion the Autocad 2014 user can open the file without issues.
View 3 Replies
ADVERTISEMENT
Nov 16, 2012
I am facing problem in my AutoCAD2013 (Ultimate version) -
1.While opening any file an alert message is appearing on the screen, for closing the same I Have to use ( X) close many times.
2 After opening the file every time I have to set the AUTOcad default setting once again, it is taking too much time,
I am not in a position to format my PC now, The snap shot is attached herewith.
View 1 Replies
View Related
Apr 4, 2013
I made this two different small project yesterday. Now, opening them and I see nothing in the content area and no time line at all, no assets or symbol shows. It is as a new satring file. I tried opening the html file as well but got the same result. I still can run the html file and see my project but can not open them in Animate and do any modification.
I am on a Mac and installed all the software a few days ago.
View 8 Replies
View Related
Jul 3, 2013
Currently have a template setup which we use and when everything is erased, purged, audited etc and the file literally cannot be purged any more the filesize is still 10mb.
There however several hundred items in the "Blocks" section of the purge dialogue box under "View items you cannot purge"..how do you get rid of these?
we have files containing hardly anything which are 20mb and empty files which are 10mb,
View 9 Replies
View Related
Nov 12, 2013
I have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
View 3 Replies
View Related
May 26, 2013
I got the CAD file 18 MB in size although I do audit, purge, recover, wblock but cannot fix this. The problem was resolved when i created new file in ACAD 2011 and copy all information to.
I mean ACAD 2013 may contain something affect to file size.
Here is the file's link [URL]
View 9 Replies
View Related
Mar 18, 2013
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies
View Related
Jan 17, 2009
I am working under Windos XP pro with Radeon X1950 pro and two screens 22"
My two problems :
1 - Opening a New file:
When I open a new file, I cannot obtain a full screen image as I did in previous versions of PS. May be because I use centimeters dimensions?
2 - In the "work space " (Is it right in english ?)
When I choice "affichage" and then full screen for work space, the image I get is much larger but not entirely full screen..
View 3 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Dec 31, 2012
While opening the autocad file it is showng some warning & I dont know what is this.
View 2 Replies
View Related
Mar 18, 2013
I have AutoCAD Civil 2013 and AutoCAD 2010 installed on my Windows 7 system.
Whenever I double click on a *.dwg file Windows starts up Civil instead of AutoCAD 2010 to open the file. Even if I already have AutoCAD 2010 running.
I went into the Control Panel Associations and attempted to Associate a file type with a specific program. When I pcik the *.dwg file extension the only option that Windows gives me is "AutoCAD Application". I even browsed to the AutoCAD 2010 directory and manually chose acad.exe but Windows just defaulted back to "AutoCAD Application".
View 9 Replies
View Related
Sep 4, 2013
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies
View Related
Dec 3, 2012
I am looking for a way to verify what version an AutoCAD file is without opening the file. I have a customer that requests the files to be in an older version of AutoCAD and for QA purposes I would like to verify that the files we are sending out are in the correct version.
View 1 Replies
View Related
Jan 3, 2013
So my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
View 7 Replies
View Related
Jun 12, 2012
Do a quick print screen of support file search path? Our computer's are set up by an outside source and I believe they did not migrate anything correctly or did something incorrectly. My issue specifically is anything to do with rendering and materials displaying is not working. I just want to make sure ACAD 2013 is looking at all the standard file locations along with our customization files. This is happening on 2 computers that have 2013 installed, all the rest are still using 2012 and this works fine. I tried exporting that profile, but still nothing works for rendering.
View 2 Replies
View Related
Oct 13, 2013
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
View 16 Replies
View Related
May 2, 2013
I am using Photoshop CS6 to prepare images for use in online Help and a print / pdf user guide for the company's newest software / Web app. What do you do to remove blank space from a screen capture? I am specifically curious if you add some type of indicator that tells the user that the actual image will be larger.
The first screen shot (left to right) is a typical screen shot that I've not edited. In the second one, I've cut the bottom button bar and moved it up to reduce the white space in the image. In the third image, I added a quick and dirty little "wave" to tell everyone that I've cut out some of the white space.
View 2 Replies
View Related
Jul 24, 2012
i am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies
View Related
Nov 1, 2012
Ghost in the machine or something:
- HP T110044 plotter.
- All drawings in this project (oops did a saveas and now I screwed).
- All Windows 7-64bit
- AutoCAD 2013
- drawings have Revit AutoCAD dumps X-referenced to them
- Title block is x-refed and created same way as above
- drawing scale is Unitles as well as insert units
- plot preview shows a drawing at 100%
- Drawings will plot fine to 50% scale and 100% scale to PDF but NOT100% to the HP plotter.
- when ploting to 100% size, plotter progress bar in AutoCAD takes awhile, hangs, then dissapears and a new bar appears and jumps across and spits out a blank sheet.
-I have the "plot paperspace last" checkbox checked.
- Could my plotter driver be corrupted?
- Tried on several machines and same thing happend.
View 1 Replies
View Related
Jun 23, 2013
file info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies
View Related
Oct 2, 2012
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
View 4 Replies
View Related
Mar 26, 2012
When opening up an AutoCAD drawing (double clicking the target drawing, no other autocad files open) the drawing opens up and the AutoDesk Exchange Welcome screen also opens up that is unnecessary and I have to close it out. I can't figure out why this is occurring or how to disable this. No other windows or options occur that asks me to disable this.
I recently reinstalled AutoCAD and am happy with everything else, it seems that when it comes to AutoCAD.
View 2 Replies
View Related
Jul 14, 2012
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
View 4 Replies
View Related
Oct 22, 2013
I have recently encountered a problem when exporting C3D to V8 dgn. The proxy graphics are set to 1, and I'm using a 3D seed file. Once the file is exported, the dgn file size is no larger than the seed file, and I am being told that the file is completely blank. I've run a recovery, audit - everything I can think of the correct this. I even had a co-worker try and generate a dgn from the same file with the same result.
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
Civil 3D 2012
Win 7 Pro 64 bit, 8 GB RAM
Intel Xeon E3-1220 V2 @ 3.10 GHz
Dell T1650
View 9 Replies
View Related
Feb 6, 2013
Every few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies
View Related
Mar 5, 2012
When in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
View 3 Replies
View Related
May 30, 2012
Everytime I try to open files created from Microstaion but saved as CAD it blue screens my computer! I have a newer laptop with Windows 7. However, an older computer in our office with Windows XP can open these files with no problem? Both computers have AutoCAD LT 2012.
View 1 Replies
View Related
Oct 19, 2012
Can I place an empty .ipt file into an assembly then start working on it?
Or do I have to create the new part, save it, then go into my assembly and place it?
View 2 Replies
View Related
Aug 30, 2012
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies
View Related
Jun 10, 2013
Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
View 4 Replies
View Related
May 30, 2013
I have 2 files I can't open. I've tried everything! The warning says the file is empty, but in the preview I can see the image of the layered file.
View 14 Replies
View Related
