AutoCAD Civil 3D :: Corridor Subassembly Tool Pallet Missing?
Jan 9, 2013When I open up Cooridors/Sub Assembly Tool Pallets all the imperial and metric sub assemblies are missing.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Add Subassembly To Corridor?
Nov 18, 2013We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
AutoCAD Civil 3D :: Corridor With Conditional Subassembly?
Apr 2, 2012I am working on implementing Chad Studer's techniques from his presentation at Autodesk University for corridors with conditional subassemblies at the driveways. Basically I created a corridor with two driveways for a test run. When I select the corridor and look at the object viewer, there are several lines going to who knows where at both driveways. But a look at the properties of the finished grade surface generated doesn't show anything out of the ordinary. I had the conditional subassembly look for a polyline on layer "driveway." It appears that there may be a gap in the corridor at each end of the pollyline. I've attached the drawing file.
View 6 Replies View RelatedAutoCAD Civil 3D :: Corridor Surface Not Using Correct Subassembly Point
Apr 29, 2013I have created a new assembly that uses a HMA dike rather than your typical curb but my surface always begins at the top of the HMA pavement rather than the top of the curb subassembly. See Picture. Where's the setting to fix this (is it a daylight setting) or it is a bigger problem in that I didn't create the subassembly or assembly correct to begin with?
Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
AutoCAD Civil 3D :: Corridor Section Editing And Subassembly Overrides
Aug 13, 2013Anyway, I'm trying to build a corridor that targets the existing surface with a linkslopetosurface sub. It works just like I want it to, but there are areas where I want to override the target and have it target an existing curb return alignment. Is there a better sub I should be using that will target one first and then a second if the first doesn't work right?
Also, with my corridor section editor, can I adjust the vertical scale to be exagerated? It's really tough to edit the 1:1 ver./hor. scale.
AutoCAD Civil 3D :: Ditch Subassembly In Corridor - Using Realistic Mode To View
Oct 18, 2013I'm using the Ditch subassembly in my corridor and am running into a problem when using realistic mode to view.
I've applied a render material to L3, L2 and L4 which is fine but when I assign a material to L1-L5 (i.e Top) it overdraws (or otherwise fails to display) the previously assigned materials for L2, L3 and L4.
If I set the Links L1-L5 (i.e. Top) to no display then L2, L3 and L4 display as expected but when IMX'd to Infraworks the existing terrain shows through at Links L1 and L5.
Is it possible to stop this from happening and have a seperate material for L1 and L5 whilst retaining L2,L3 & L5 materials?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Make Corridor Intersection Object With Custom Subassembly?
Jan 8, 2014I'm not having any luck on my own. Can I use subassemblies that I create in subassembly composer to make an intersection using the "CreateIntersection" command?
View 5 Replies View RelatedAutoCAD Civil 3D :: Empty Tool Pallet
Jan 11, 2012Recently installed 2012 on new computer. Single license user. Open tool pallet and no sub assemblies, only symbols and such. I am able to view a long list of sub assemblies, but cannot get them to the tool pallet. Have tried drag and drop with no success.
View 2 Replies View RelatedAutoCAD Civil 3D :: Typical Road Subassembly Carriageway Missing Parameters?
Feb 5, 2013I am just having some difficulties using the standard UKIE subassemblies where the carriageway is not showing the parameters correct. See the drawing attached. Eg:
1) The properties does not show the side correctly it has a zero value (not much of a issue as i can use the mirror command) (drawing subassembly)
2) I am unable to choose any superelevation on the subassembly . Now this is what causing me problems.
I have already re-installed the software from scratch and have also downladed the latest service pack.
AutoCAD Civil 3D :: Corridor Feature Line Missing
May 16, 2013I have a corridor with the two daylight points marked as BOUL BOUR.
View 2 Replies View RelatedAutoCAD Civil 3D :: Corridor Feature Line Missing
Jun 1, 2012I created an assembly using BasicLaneTransition. When I apply it to my corridor I am not getting a feature line at the crown (center) of the road. I have used this subassembly on several other projects and have not had this issue. The only difference I can think of is that the other projects we started in C3D 2009 and this one is in 2012.
How do I get my feature line to show without adding a marked point?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Deploying Subassembly Tool Palette
Jul 28, 2013I am building sub-assemblies using Sub-assembly composer. The out I get is PKT files. I generally import them and place them in tool palette.
1. Now how to do create deployment package like a setup file where the user can install and restart to find working toolpallete.
2. Also how do I create road cross sections using Sub-assemblies and them as an entry in tool palette. when the user click and create c/s.
AutoCAD Civil 3D :: Tool Not Registered Error For New Custom Subassembly
Oct 17, 2008I created a new version of DaylightBench subassembly with a different class library application on .net for c3d 2009.
I added the tool data to C3D Metric Transportation Subassembly Catalog.atc. Tool is listed on Subassembly catalog and i can copy-paste the tool to Tool palette.
But on tool palette when i try to drag it to drawing it gives the error "tool is not registered". error msg is attached.
can it be about the resource fileds on ATC file eg: resource="1302" or the new GUID values?
AutoCAD Civil 3D :: Import Subassembly API For Custom Subassembly - Error?
Nov 12, 2013When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
the code like this:
atcFile = @"D:9f92eaa4ef514ac982518852e1169932.atc";
itemId = "ab660722-c69d-4ade-b373-0e9f99c94e55";
SubassemblyCollection subassemblyCollection = cDoc.SubassemblyCollection;
ObjectId subassemblyId = subassemblyCollection.ImportSubassembly("TestSubassembly", atcFile, itemId, this.doc.Editor.GetPoint("Select import subAssembly location").Value);
However, it is OK if to import subassembly provided by Cilvil 3D.
AutoCAD 2013 :: Missing Objects In Properties Pallet
Sep 24, 2013My company have decided to use plain autocad as the base instead of Civil3D. Since this been done im missing information in the properties pallet.
The information im interested is shown in attachment properties 1 (This is from Civil3d). In the properties pallet in plain autocad this information is missing se attachment Properties 2 (From plain autocad).
Is there any way to reach this information in plain autocad. This is in autocad 2014.
AutoCAD Civil 3D :: Surface Corridor Is Not Triangulating Entire Corridor Boundary
Sep 14, 2012I have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedAutoCAD Civil 3D :: Copy Corridor Or Corridor Station Values Only?
Dec 13, 2012Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
AutoCAD Civil 3D :: Corridor Surface Is Not Matching Corridor Top Links
Mar 21, 2013My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
AutoCad :: Add Command To Tool Pallet
Oct 19, 2011Is it possible to add a command, say 'laymcur' to a tool pallet ?
View 4 Replies View RelatedAutoCAD Architecture :: Tool Pallet Won't Stick
Apr 21, 2011I'm using ACA 2008 and recently had to have some things reconfigured on my computer by our IT guy because of a few problems. Because of that, I've had to fix a couple of things with my settings in ACA to get it back to what I had before.
One thing that changed that I can't seem to fix is a custom catalog for my tool pallet we have always used that wont come up with my standard ACA pallets when I start up ACA. I have to hit cntrl+4 to bring up the catalog library and from there I can see the one I want to use. I grab the eyedropper and drag it to the tool pallets and it works fine, but when I close out ACA and restart it's gone again.
How can I get it to stick permanently?
AutoCad :: Blocks In File Not Matching Up With Tool Pallet
Dec 4, 2013I created a file with all the blocks that I use of horn/strobes and strobes only for fire alarm systems and made a tool pallet. I've had to edit and tweak them until they fit my needs but now when I opened autocad my tool pallet was gone so I made another one but now my blocks are not the new revised blocks but the old ones. I double checked the path for the file and it's correct. When I open the file containing the blocks they look and behave like the blocks I revised.
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile Tool Bar Went Missing Revisited?
Jun 21, 2012I had previously posted here and recieved resolution. The issue has re-occured,but this time the registry key is not on my computer. "R18.1ACAD-A001:409" missing?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Architecture :: 2011 - Load XTP File To Tool Pallet
May 17, 2011How do I load my .xtp hatch file from Arch 2008 into my Arch 2011 tool pallet?
View 9 Replies View RelatedAutoCad :: Ctrl + Z Not Functioning After Loading Commands From Tool Pallet?
Jun 9, 2013Auto cad 2006 and 2012; after loading commands from tool pallet The keyboard function Ctrl+Z function is not working.This error is happening all computers.
View 6 Replies View RelatedAutoCAD 2013 :: Fatal Error When Inserting Block With Attribute From Tool Pallet
Apr 20, 2012Every time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
AutoCAD Civil 3D :: 2013 - Dynamic Blocks Missing In Annotation Tool Palette
May 1, 2012Noticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
I'm sure I could copy them from 2012, but still.
AutoCAD Dynamic Blocks :: Block With Field Doesn't Work If Paste From Tool Pallet
Sep 27, 2012I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedPhotoshop :: Tool Pallet Options Not Working
May 19, 2009The tool pallets in all my Creative apps Photoshop, Illustrator and Indesign have just stopped working, ie the secondary hidden tools do not appear when you click on the tool, so I am unable to access the other tools. Seems like it should be something pretty simple, but it is eluding me,
View 3 Replies View RelatedAutoCAD Inventor :: How To Copy Subassembly To Create Similar But Different Subassembly
Sep 27, 2013(in Inventor Pro 2014,64 bit):
I've made an stairs assembly that contains adaptive parts that are all controlled by the assembly parameters.
Here is my assembly and the controlling parameters. The stringers on the side are made with the frame generator and use the "extend" feature to get the appropriate length, as driven by the parameters. The reason I used frame generator is so that I can easily change sizes of the stringers down the road, if needed. I chose to make the parts associative so I could control all of the parameters from within the assembly instead of opening each part separately.
My goal now is to be able to use this assembly (or something similar) as a template to create new sets of stairs, all to be placed in the same main assembly.
I attempted to duplicate all of the parts (append a "2" at the end of each file name and replace components in the new set of stairs with the 2nd version) but ran into problems with the two stringers. I can't figure out what to do to get the Frame00001 and Skeleton00001 to reassociate to Frame00002 and Skeleton00002. So any time I change my slope, the original stairs will end up trying to copy the new stringers instead of keeping the old ones.
how can I make this assembly reference a new frame, and secondly?
AutoCAD Civil 3D :: How To Create Subassembly
Jul 24, 2013How can I create a subassembly..AND hot to add a Pave 3 option or another subbase depth.
View 9 Replies View RelatedAutoCAD Civil 3D :: Transition From One Subassembly To Other
Aug 28, 2012I need to transition to one subassebly to another. The first subassembly is at existing ground the other assembly is above ground. See following picture:
I need to transition from station 12+50 to 13+50. See following picture:
Here is a picture of the Corridor Properties:
Do I need to make a different subassembly in between the two stations? Is there a command I am not seeing that does it for me?