If I change the size of, say, the "file open" box, and shut it down, then open it again, it goes back to the default small size. Is there a setting that I can change so that the dialog box size stay's to my selected size?
View 9 Replies
Is there a way available in autocad so that size of chosen entity (say circle, polygon) remains as is during zoom-in and zoom-out?
View 4 Replies View Relatedwhen I right click Parts List entry in prospector (Pipe Network) the Network Parts List dialog box appears. I then, as instructed, right-click on the parts list entry and add part family which appears under parts list heading (PVC) upon expanding. Right-clicking PVC and selecting "Add part size" brings up an empty Part Size Creator dialog box.
Additionally, as the book states, I navigate to the htm file that you should be ablr=e to view the parts in and my browser window is blank except for the 2 frames. This is in c:Program Data....enuPipes CatalogUS Imperial Pipes.
C3D 2013
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
I have a 5 section book which I need to print. I usually export to a PDF then re import into a single indesign document. Then use print booklet to print the book. My problem is that I need bleed on my pages so I have set my page size to O/S A4 (32*22.5) When I export to PDF the pages end up A4. How can I export so the page size remains the same?
View 15 Replies View RelatedI joined two video clips and saved them as a single clip. They are both .mov files. One is 18mb and the other is 15mb, so I assumed the new file would be 33mb. When I save the new file in .mpg, however, it is only 27mb. When I try saving it in .mov, it balloons to over 120mb. How should I save the new clip to maintain the original size and ensure I'm not losing any quality?
Also, when I save the clips it seems to be converting the original 640*480 aspect ratio to 720*480. How do I preserve the original aspect ratio?
I use CS4 and when working in Illustrator ( and later taking into a book in InDesign) how do I maintain custom page size with bleed in Illustrator when saving as PDF . I have been told my files are not print ready and have no bleed even though I set a bleed and accurate (custom)page size initially. It seems I lose these when I save as a PDF for Printers to use.
View 4 Replies View RelatedI'm playing around with the new generate plugin and running into an issue. I have a pre-existing set of icons that need to maintain a 70x70 transparent background. Unfortunately when I set up Generate the assets are cropped to the pixel dimension of the graphic.
Is there a work around? Or do I need to go through each asset and resize it to 70x70?
I think I've found a bug: PPX6 is not honoring the "maintain size" option while exporting as PNG.
To reproduce:
Create a new 24bits RGB 600dpi image.
Export it as PNG
Check the "maintain size" option (size controls get disabled)
Now change the "resolution" to 96.
Size now shows 0px 0px and scale 1%.
Uncheck the "maintain size" option and mark it again.
DPIs are now something like -491.
PhotoPaint X6 v16.0.0.707Windows 6.1 64bits 7601 SP1
This has been an issue for me for a while, not just in CS6. When copying text from Photoshop into Illustrator the font comes through but the size is always about 4 times what it was in Photoshop. Both documents are set to the same dpi. I don't understand where it's getting this arbitrary size info from. Any trick to get the size to come though correctly?
View 11 Replies View RelatedIn Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies View RelatedElements 7 used to place my photos in a new document and there was very little resizing to do. now with elements 10 and 11, my photos are placed way larger than the document and i have alot of annoying resizing to do on every one. There must be a way to change this.
View 2 Replies View RelatedI can not figure out how to maintain the original file size of my photos when I open them in Paintshop For example, the original file might be 3.78 MB but once it opens in Paintshop it is only 706 KB. Do I need to change settings somewhere?
View 1 Replies View RelatedI'm using AutoCAD Architecture 2012 and Windows 7 Professional x64. Is there a way to change the default sizes of various dialog boxes? When I use the File Open dialog box, for example, I always want it to be bigger so I drag the corner to enlarge it, but the next time I call it it's back to the same default size. Can I drag it to a new size and make that stick, a variable set differently perhaps, or is something more sophisticated involved?
View 1 Replies View RelatedWhen I open a new drawing, the open dialog window stays the same size which is usually too small. I have to resize it every time I open a drawing.
View 3 Replies View RelatedIs there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
View 2 Replies View RelatedI need to increase the size of a fixed dialog box so I do not have to use the horizontal and vertical scroll bars to see the contents, I have included a picture.
View 3 Replies View RelatedAmong about a dozen ACAD users in my office, one is missing the "Arch D (landscape)" paper size that accompanies the PC3 file we generally use. I have checked that the roll size and other settings in the machine in question and all of that looks good. I don't want to edit this PC3 as it works for everyone else and don't want to create a new PC3 for this one user.
View 2 Replies View RelatedHaving problems with the updated new file dialog and I'm not talking personal problems. I switched it to detail view and widened up the name column so I could see the whole name. I could actually live with that setup however the next time I opened the new file dialog all the columns returned to their default size and the sort also reverted.
Is it just me or does the new file dialog not remember any changes to it's layout?
USING MAC, CS 5.5: When I open the image size dialog box -- as well as the canvas size box -- for any file; new or existing, and try to change the size, the box either won't let me change the number, or it closes out. Doesn't scrash the app; just refuses to cooperate.
View 4 Replies View RelatedWhen using the image size dialog, regardless of the zoom amount or the size of the dialog I have no ability to pan around the image in the preview window.I have the hand available to me and clicking on the preview shows before and after variations but no panning. The main image behind the dialog does pan whenever I try panning in the preview window.
View 1 Replies View RelatedModifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Some paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
How I got this annoying display at the bottom of my layer dialog box...???...
"All: 197 layers displayed of 197 total layers"
it covers up the slider and the bottom 2 layers in the dialog box so I can not see or edit them...I will try to attach a screen cap to show you what I am talking about...
When i start up AutoCAD C3D 12, this dialog box is pop up " This drawing was created with a newer version of Civil 3D. All entities created by Civil 3D within the drawing are in a proxy state..............are disabled for this drawing." I just started an AutoCAD, Not open any drawing yet!
How do i turn this message off? (permanently)
P.S. It just happened recently since the IT guy changed some variables on my machine, but no clue what variables he changed?
It happens to me about 50 % of all time when I'm using the Paper Size dialog to crop an image:
No matter which alignment I select in the Placement drop-down box, PhotoPAINT uses the opposite direction.
This doesn't always happen, but it happens about every second time I use that dialog (and I use it often). It seems the error occurs randomly, probably not initializing some internal program memory location correctly.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I thought that I would take a shot at a possible reason why cropping with the paper size dialog would give different results which appear to be random.
1. The dialog opens with the programmer assuming the user will make the paper size larger than the image. He takes the difference between the paper size’s lower right corner and the image’s lower right corner and subtracts the two. That’s a positive number since the paper size is larger than the image. It’s added to all pixel positions in the image which brings the image to the lower right corner of the paper.
2. Now consider what will happen if the paper size is smaller than the image.
Scenario 1: The user picks paper size before position. The difference between the lower right corners is now a negative number. Using negative numbers to reorder the image pixels will incorrectly display the upper right corner of the image in the canvas.
Scenario 2. The user picks position before paper size. The lower right corners of the image and paper are set equal. Reducing the paper size now leaves the lower right corner of the image to be displayed.
Thus the display of the corner of the image appears to be random. However, it’s following the orders given by the user. Without doubt, there are other possible scenarios for this behavior.
In Compute materials, Eartworks field dialog I have two items in Surfaces section- EG and Datum. When i have to select Object Name for them i only get surface name, but not the corridor which i have created. What is missing?
View 8 Replies View RelatedHow can I disable the selection dialog box and enable selection cycling? I used to be able to hit shift+space bar to cycle through overlapping lines, I'd like to still be able to do that. I just switched from C3D 2011 to 2012.
View 4 Replies View RelatedI am running 2012 and my group dialog box is nowhere to be found. (I opened 2011 and the dialog box pops up)
I just get a command prompt to select objects or [Name/Description]: -group gets me command line as usual. I enter a lot of legal descriptions and set them as various named groups for boundary analysis. Selecting the various groups via dialog is much easier. I have checked system variables but I cannot find anything I need to change. I have searched the discussion groups also but could not find any info.
Civil 3D 2012
Win 7 64
i7-980x
24gb
quadro fx 1800
XEON E3-1270
32 GB RAM
Win 7 Pro 64
Civil 3D 2013
256 GB SSD
2TB HDD
nVidia Quadro NVS450
3 monitors
(all available hotfixes/updates applied)
