Photoshop :: Adding A New Paper Size In CS6 Print Dialog?
Aug 31, 2013
Some paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
View 3 Replies
ADVERTISEMENT
Oct 16, 2012
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies
View Related
Jan 5, 2013
It happens to me about 50 % of all time when I'm using the Paper Size dialog to crop an image:
No matter which alignment I select in the Placement drop-down box, PhotoPAINT uses the opposite direction.
This doesn't always happen, but it happens about every second time I use that dialog (and I use it often). It seems the error occurs randomly, probably not initializing some internal program memory location correctly.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 14 Replies
View Related
Jan 28, 2013
I thought that I would take a shot at a possible reason why cropping with the paper size dialog would give different results which appear to be random.
1. The dialog opens with the programmer assuming the user will make the paper size larger than the image. He takes the difference between the paper size’s lower right corner and the image’s lower right corner and subtracts the two. That’s a positive number since the paper size is larger than the image. It’s added to all pixel positions in the image which brings the image to the lower right corner of the paper.
2. Now consider what will happen if the paper size is smaller than the image.
Scenario 1: The user picks paper size before position. The difference between the lower right corners is now a negative number. Using negative numbers to reorder the image pixels will incorrectly display the upper right corner of the image in the canvas.
Scenario 2. The user picks position before paper size. The lower right corners of the image and paper are set equal. Reducing the paper size now leaves the lower right corner of the image to be displayed.
Thus the display of the corner of the image appears to be random. However, it’s following the orders given by the user. Without doubt, there are other possible scenarios for this behavior.
View 3 Replies
View Related
Feb 22, 2012
Among about a dozen ACAD users in my office, one is missing the "Arch D (landscape)" paper size that accompanies the PC3 file we generally use. I have checked that the roll size and other settings in the machine in question and all of that looks good. I don't want to edit this PC3 as it works for everyone else and don't want to create a new PC3 for this one user.
View 2 Replies
View Related
Nov 8, 2012
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies
View Related
Jul 19, 2012
Can I get rid of the thousands separator in the Resample and Paper Size dialog boxes?
View 4 Replies
View Related
Jun 5, 2013
Where do I find the selection that lets me select 5 x 7 paper size with option to print with or without borders
View 2 Replies
View Related
Oct 26, 2013
I go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies
View Related
Nov 24, 2012
How do you print multiples of a business card size picture on one sheet of paper? Tried using columns, but not printing multiples.
View 3 Replies
View Related
Sep 19, 2012
Trying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies
View Related
Oct 19, 2011
I'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
View 8 Replies
View Related
Dec 20, 2013
I used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies
View Related
Aug 19, 2011
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies
View Related
Aug 20, 2013
I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
View 3 Replies
View Related
Oct 8, 2013
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
View 3 Replies
View Related
Sep 28, 2010
Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies
View Related
May 20, 2005
I am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
View 3 Replies
View Related
Jul 9, 2012
how i can insert a new paper size or edit a paper size in plotting
View 2 Replies
View Related
Feb 19, 2013
Q I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies
View Related
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
Dec 5, 2012
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
View 6 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Aug 13, 2013
My company is exporting Postcards in Illustrator CS6. What we do is have a large data set imported into the Variables applet and use the Actions applet to record and export action and play it through the whole data set. We later combine the PDF files and print them as a batch.
My question is: Is there a way to create an action that will automatically print the data set while avoiding the print dialog box? It will make the process simple and move faster.
Also, what are your was of creating postcards? Catalogs?
How do people create a catalog with over 60 pages and keep the file size low?
View 1 Replies
View Related
Oct 3, 2007
I am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
View 2 Replies
View Related
Oct 17, 2012
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
View 1 Replies
View Related
Jul 7, 2011
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies
View Related
Aug 2, 2012
I have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
View 2 Replies
View Related
Jul 20, 2013
the Print Dialog simply will not show up so I can adjust the ICC profiles etc.I have CS6 Upgrade installed (upgraded from CS5) and running on a Windows 8 PC.
View 8 Replies
View Related
Nov 7, 2012
I've a question regarding the Print dialog that states "Needs Calibration" just below the drop down for selecting printers. The selected printer is a HP Photosmart C7180 and PS CS5.5.
What calibration PS is refering to? I've tried the built in pen and color adjustment on the printer but that operation does not seems to be of interest by PS.
View 8 Replies
View Related
Nov 16, 2011
I "lost" the ability to plot to standard architectural paper sizes when my dialog box opens. I only have standard paper sizes and other non-architectural related options.
I can still plot to my cute pdf, but only on 8.5x11. I need 11x17, 24x36, etc.etc.
View 4 Replies
View Related
