I have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
When creating PDFs/PNGs to watch on a computer, it doesn't make sense to use standard paper sizes. The reason is that usually the plotted window does not fill both width and height and there are big white margins inthe produced file.
So my question is, how can I easily create a paper size to match a selected window (or layout) at a certain scale?
how i can insert a new paper size or edit a paper size in plotting
View 2 Replies View RelatedJust got a Epson 3880 printer and learning to use Lightroom 3 with it. I am trying to print a 8x10 image on 8.5x11 paper. I set the cell size to 8x10. While the print looks great it is not 8x10 (larger). Is there some interaction between the margin settings and the cell size that I need to understand?
View 4 Replies View Relatedhow do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies View RelatedI'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.
How do you set a paper size in the print module if you do not have a printer installed. I want t use the print module to make custom prints on 8x10 and 11x14 size paper. But I want to print to a JPG to send out to be printed.
View 2 Replies View RelatedWhy do I need to change the paper type/size in Lightroom everytime I want to print aphoto, even during the same session
I set the paper to say 15 * 18 and borderless and select print. The paper size shown in the top left changes back to A4 by itself. Try setting the options again and they remain as selected. Select another photo and try to print 15 * 18 borderless and the paper size changes again.
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedI go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies View RelatedMy picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View Related1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
I created a small object using Inventor 2013.
The base of this object is just a cylinder with diameter of 3.599 mm. (see attached image M1).
Now I wanted to 3D print this object. Inventor creates the *.STL-file.
The Inventor 3D print dialog shows a witdh and length of arround 4.12 mm by a scaling of 1.000 !?!
Why it is bigger than what I created? It should be 3.6 mm.
If I upload this to shapeways they show also 0.4 cm width / length. So my object will printed a littlebit larger than I created !?!
Even if I change the resolution inside the STL-dialog it does not change anything. Why the STL-Object is bigger than the model I created?
I am making a list of thumbs in Photoshop that I want to all be the same width and height. What is the fastest and best way to accomplish this when the images are all slightly different sizes?
I've already chosen one of the images that has the perfect dimensions for the page. I'm confused though about how to crop the other images to match those dimensions. I am using CS2.
For some reason two of my pipes in my catalog want to draw themselves larger than they should be. Took a look in partbuilder, everything looks fine.
C3D 2012, SP1
Win7 - 64bit
I'm searching a perfect source that can work for a scaling System which is best and recommended to match canvas size.
View 1 Replies View RelatedI'm shooting both full-size raw and SRAW with my 5D MKIII - Is there a way to have Lightroom sort these duplicates by size?
View 4 Replies View Relatedid like to have her on a white background. im good all the way to the point where you use the 'move' tool to drag the masked image onto a white background ( which is a blank PS document saved in Jpeg). when i drag it over i end up with a huge close-up crop that fills the entire image of my white background so that you cant even see the white.
conversely, when i drag the white background over my mask i only get a small rectangular box of white that fails to cover the entire background area once i drag the background layer below the mask.
I've received a dwg file from someone and I want to print it at scale 1:50 on A0 paper. However, I'm struggling creating the right scale.
My problem starts with the fact that measuring lines in the diagram does not produce values that match the actual size. E.g., I have a wall of size 390, but measuring it shows 621.
Is there any way to change the units to match the actual desired size?
Then, I find it tricky to create the right scale for printing (people will get the paper and use a ruler to measure distances, so accurate scale is important). If I cannot change the units, I guess I need a different scale than 1mm=50units. So I tried 1mm=8units, because 7.8mm should measure as 390cm in 1:50 ruler. But this is not very accurate.
I'm trying to scale a pattern to fit the entire canvas without tiling it over the whole layer. To try to do this, I made a rectangular selection box, then dragged and dropped a pattern into the box. This created a new layer called "clipboard". I right clicked the clipboard layer, then left clicked "Scale Layer". Then I entered a width and height in pixels that matched the size of the canvas. The selection does expand, but it doesn't fill the entire canvas.
View 11 Replies View Relatedbefore when i wanted a 8.5" X 11" size i would just put a piece of paper on my screen and size it up with what i had in PS....i know barbaric right !
the only reason i do that is when i make a new Doc and use a preset " Letter " it pulls up huge on the screen 25% , not actual size.
When i select the history brush, i keep getting this message.
'Could not use the art history brush because the current canvas size does not match that of the history state'
how to choose a frame to match existing photo size
View 1 Replies View RelatedI'm trying to print a 24 x 34 print to an HP Z3100.Everything sets fine in the HP driver, but when it comes back to the Photoshop print dialog box, PS still thinks it's printing to an 8 1/2 x 11 sheet.
How do I get Photoshop to 'listen' to what the printer is supposed to be doing?
I have the next problem with PDF printer:
I have configured a special size and assigned to a PC3 file
(1350.00 x 1050.00 mm.)
This is the default printer for some other layouts in some other DWG's as well.
If I print the layout directly from the drawing editor, it creates a PDF with the paper size I assigned, but if I print it using the sheetset, it creates a document with another paper size based on I don't know what.
The plot and publish details window shows the next message when printed from the sheetset
Sheet: BA_00-P-050-0100___ - Plotted
Page setup:
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: ...DesktoppublishBA_00-P-050-0100___.pdf
Paper size: ISO full bleed B0 (1414.00 x 1000.00 MM)
I cannot find the mistake.
How do you change your paper size? I'm not given the option in the drop down box:
Page Setup - 0.jpg