Why do I need to change the paper type/size in Lightroom everytime I want to print aphoto, even during the same session
I set the paper to say 15 * 18 and borderless and select print. The paper size shown in the top left changes back to A4 by itself. Try setting the options again and they remain as selected. Select another photo and try to print 15 * 18 borderless and the paper size changes again.
How do you set a paper size in the print module if you do not have a printer installed. I want t use the print module to make custom prints on 8x10 and 11x14 size paper. But I want to print to a JPG to send out to be printed.
View 2 Replies View RelatedI need to "Programatically", using Visual Studio, set the default printers paper size to either "A4" or "A3".
I have the following code that gets the required paper size ("A4" or "A3") from the registry and checks that the default printer supports "A3". If it does I want to set the paper size to "A3".
Here is my code so far.
Imports Microsoft.Win32
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SetPaperSize As String
Dim PrinterPaperSize As String
SetPaperSize = My.Computer.Registry.GetValue("HKEY_CURRENT_USERSoftwareMechTools", "Printer Paper Size", "0")
For Counter = 0 To PrintDialog1.PrinterSettings.PaperSizes.Count
PrinterPaperSize = PrintDialog1.PrinterSettings.PaperSizes.Item(Counter).PaperName
If PrinterPaperSize = SetPaperSize Then
' MsgBox(SetPaperSize) HERE IS WHERE I NEED THE CODE TO SET THE PAPER SIZE
Exit For
End If
Next
End
End Sub
End Class
I have AC 2010 LT. I have added a printer which is actually a driver for a laser cutting machine. I have been able to add the cutom media size of the machine. I cannot get that size to stick with the printer name. Every time I choose that printer I have to reset the media to the custom size.
View 4 Replies View RelatedI have created the code to print out the pages from a drawing using Ilogic and the Print Manager.However, I cannot get the ilogic code via the Print Manager to change either the orientation OR the paper size to suit the print out.
For example, If I have an A3 drawing i can create the Ilogic code for the Print Manager to select the page size of A3 (kPaperSizeA3) within the code, but when I run the code the printer will ONLY select the Default of A4 paper.
The A3 paper is in a different tray but I cannot get the Print Manager to Select the A3 Paper.The printer we are having this issue with is a HP LaserJet 5200...We are also having the same problem of Printing out 1:1 Scale drawing to an A0 Plotter. I cannot get the Print Manager to change the Output Page Size either.
This is for a HP DesignJet 430...I have just tried to use the iLogic Snippet for Printing, and if you change the page size to suit A3 (kPaperSizeA3), the printer asks for a paper size of 312mm x 210mm.... This was with the HP LaserJet 5200.
how to get the Printer output paper size changed through the Print Manager.
I'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
I am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
Im trying to print my drawing A3 but when i shrink the page outline to suit, the print area is still A1. My original page size was A1.
View 4 Replies View Relatedsoftproofing. I apply a color profile appropriate to my printer/ink/paper, and then I can see what colours are in/out of gamut, and won't print as I expect. But, when I click Soft Proofing, the image takes on a less saturated look, however if I select SRGB as a profile it looks normal. That is I believe because sRGB is the profile I have been using anyway. What I don't understand is why the whole image changes. I assume there is more to it than just colours in and out of Gamut.
I do so LR4 asks if I want a proof copy, which is fine and I understand why. When I make a proof copy though, all the adjustments are greyed out so I cannot do anything.
Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedI have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
how i can insert a new paper size or edit a paper size in plotting
View 2 Replies View RelatedI am trying to print on photo paper from Ligthroom 4 with the Epson DX8400 printer, on Windows 8. Yet I can't change the paper type. Is it possible that Lightroom doesn't like Windows 8 or is more likely that my printer doesn't like Windows 8?The screenshot shows all that I am offered in the porperties section
View 4 Replies View RelatedI'm exporting photos from Lightroom 3 to be burned to a CD for a client, and only want to export one set of files. Which output sharpening setting should I use if the client does not know if they want the photos printed on Matte or Glossy paper, and indicated "probably both"? The photos will also be viewed on screen, but prints are the preferred end use.
View 4 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedWhere can I turn on options on an image and get the file size and type?
View 4 Replies View RelatedI used to use Photoshop CS on my old computer. There it was possible to choose from a large list of profiles for different paper-types and different printers. I have now got a new Intel Mac (OS 10.8.3). I have installed Parallels so that I can run a 10.6 Snow Leopard server; and I have installed Photoshop CS2 in it. To my surprise and dismay, I cannot find out how to access the list of paper and printer profiles any more.
View 2 Replies View RelatedI have a macbook pro running osx 10.8.4 and LR 4.4 installed. When I try to change the cache size in the LR Preferences from 1.0 gig to 10 it doesn't "stick". I change it, close the pref. menu and when I reopen it to check, it's back to 1.0 How can I change this and make it stay?
View 3 Replies View RelatedThis is on a Windows 7 work station
User reboots computer, logs into network, opens the printer properties on one of our HP plotters, and the print properties pages show just fine.
The user will open Inventor, and attempt to print a drawing, and the print settings page shows in all weird characters.
We have applied all service packs and hot fixes. How do we get this to show normal like it does on all the other programs?
Im supposed to have a slider that allows me to change the size of my thumbnails.
I cant figure out how to get it back on my UI.
Where is the menu that tells it to show on the interface?
changing the font size that's used in the titles and captions of pictures when I create a web gallery.
I'm using LR to create web galleries of my son for my family to see him growing up and I like to use the title and captions to put comments about each picture. Some of the people who view these galleries on-line have poor vision and need to see a BIGGER font. The only font size for titles and captions seems to be embedded in LR and it's mighty small, any way to increase it?
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
Photoshop 11 quis when I try to choose a media type from priner settings on my new macbook pro. I am using an Epson RU2000 printer, and do not have this problem on my old macbook pro.
View 7 Replies View RelatedI have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedUsing Photoshop Elements 11 on Mac OS X to print image on Canon Pixma iP4850 printer, where is option to chose paper type? Print window says chose printer the paper size but not paper type.
View 1 Replies View RelatedI am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
use soft proof preview in CS6. I want to indicate Epson paper type under device, however, no Epson papers are listed. How do I enter this selection?
View 4 Replies View RelatedHow do I select paper type in PS elements for Mac OS Lion 10.7?
View 1 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View Related
