I have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
View 2 Replies
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedI have a 3D model that consists of a large number of "small" objects that i created earlier in separate files. The problem is that now my model is 50Mb and I am having trouble working with it. Is there a way of reducing size, or is there any other solution that would not change the geometry of my model?
Working with Intel Quad Core, 6Gb of ram and ATI Radeon HD3800.
i have produced a drawing and have copped and pasted quite a few photograhs on it showing details etc. however bnow my drawing has a very large file size. i have purged drawing, it is the photographs
View 3 Replies View RelatedI am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
My intention was to convert a 3DS-File into an IPN-File, to use it in Inventor.As I did not managed to do this in Inventor, I importet the 3DS-File in CATIA V5 and converted it into a CATIA-CatPart and from there in an IGES.Then I was able to open it in Inventor and made a IPN out of it.
The PROBLEM: The original 3DS-File had 700 kilobyte but the actual IPN 54 MegaByte !
We were sent some step files of valves from a company - what would be the best practice to make this into (clean up) a useful part to be used in our assemblies. Interested in converting it into a useful part but reduced in size. (Compared to other valves we use - this is easily 10 times the size).
View 7 Replies View RelatedI designed artwork for a large banner (84" x 32") so my AI artboard is that large. As you can imagine, with all the text and graphics I used, this file size is 22.8 MB. I need to email this art to the printer, but the file size is too large to email. How do i go about reducing the file size in AI so it still maintains large format print resolution? Will saving to a PDF lose the print quality?
View 7 Replies View RelatedWorking in Adobe Photoshop CS. I have a tif file that is 36"x36" at 150dpi.
Flattened image; Grayscale mode. File size is 28.499MB. Is there any way
to reduce the file size other than change it to a jpeg? I need to email it
somewhere and they can't accept files over 20MB.
I have several pictures that are over 1 mb in size. I need to get them down to under 100 kb for my wall charts to print.How to do?
View 1 Replies View RelatedI made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
View 7 Replies View RelatedI had a question on reducing the image size after editing in Photoshop.
After doing my changes in Lightroom, I typically make edits in Photoshop and then do some final touchups back in Lightroom. The RAW file from my camera is approximately 24 MB. After making my edits in PS, the TIFF file it produces (with all layers flattened) is in the 60 MB range.
My question is, if before sending in back to LR, I change the image size in PS say to 12 MB or so, am I basically creating a lossy jpg file? Meaning -- by reducing that TIFF file size down to 12 MB am I throwing out important information such that when I go back to LR I am losing information and won't have as much control as the 60MB TIFF file?
keep upwards of 80MB per image (due to the RAW + edited file). I don't want to lose imporant information so I will if I have to, but would prefer not.
I have a number of files which were prepared in Corel Draw which I would like to post online. The designer has supplied the PDF versions of these files, however, the files sizes are too large for web usage. A 8 pg document is 5Mb. I have tried reducing the sizes by compressing in Acrobat; importing the PDFs into Corel Draw and re-creating PDF files with reduced resolution; recreating the PDF without the bitmap images (there are about 10 images)..yet the file size of the PDF does not change significantly.
What else can I do to reduce the file size of the generated PDF files? The files are newsletters, so most of the content is text and a few shapes and lines.
I am using photoshop 7, I am trying to reduce jpg images around 1 mb sized at about 2400 x 1800. I am trying to reduce the image down to about 5 centimeters and retain the sharpness.
I have found that my images are blurring a fair bit.
I have two designs for labels that have to be approved by the government for type size regulations. The current size of the illustrator files are 133.3 MB and 24.7 MB I need to provide these at no larger than 450 kb AND the type must be readable and measurable for approval.
I have tried everything I can think of to provide the artwork small enough yet still retaining enough resolution to not make the type fuzzy and not able to be measured for size. I've tried making the files from within illustrator, I've tried taking everything into Photoshop to make the JPEGS with no luck. They want either a gif, jpeg or tiff no larger than 450 kb that is viewable at the print size of the label with no loss of resolution...
In vX1 I could save jpeg without substantially reducing file Mb size. In vX4, whenever I edit and save a jpeg file (using save & save as), it results in a reduced number of Mb's. Options in the 'save as' dialog are set at best. It would appear that PSP X4 is automatically optimising. Is there any way that the original file size can be retained on saving after editing?
View 7 Replies View RelatedSay I have a model and some layouts in a file.
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
Lastly, I reloaded the file.
Windows 7 64bit w/ 64bit AutoCAD 2013
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
I had a drawing of 64 MB size.Eliminating the single element and no element groups and optimising the block design we could reduce the drawing to 48 MB size.The drawing does not have layer filters, states and is purged completely. It contains links to an external database in which the attribute data is stored.
What else could be done to reduce the drawing size. The drawing response time is too slow as of now.
I have a cybershot and have it set to 1280 x 960...Fine. The pictures look great but sometimes when I upload to walmart or shutterfly them become pixelated. Or when I use irfanview (PC only program) to resize to something smaller and pixelates them as well.
Should I change the camera settings, if so, to what? Should I use PS to resize them?
I have these PDF catalogs which are about 20 - 50MB each. Some of my customers are not comfortable browsing online so a digital catalog (here) works better for them... The same people generally have bad internet connections so I need to re size these PDF's so they can be downloaded rather quickly.
Starting with a 20MB PDF, I open all slides within Photoshop. I batch process the images from 300dpi to 96dpi , and shrink the size from 24 Inches across to 15... All the images are saved in a new folder, opened back in Photoshop and a new PDF is created. Considering both size and dpi has been clipped by a fairly large amount, you would think that the new PDF would be smaller... But its not, the 20MB version ends up around 60MB afterward.
I don't feel like purchasing Acrobat Pro because I know this should work within Photoshop.
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I have 900 photos/ scans that are all large in size. I know want to make them suitable for a web site ie 72/91dpi and around 1024*768 px in size . thought the save for web choice via an action was the way to go ie create the action and then run as a batch.
View 1 Replies View RelatedI have been told that you can reduce the number of pixels in a picture, but keep the size of it.I am unsure about this, so I thought I would ask the experts as it were.I do know the JPEG image compression when saving, but is there any way you can specify the number of pixels?
View 10 Replies View RelatedI have a Sony camera and have it set to take big pictures with high reso.
In PS, can I reduce the size 3 MB to something a lot smaller but still keep ok quality? I go to Image Size but that just makes the pic smaller (duh) I want to change the actual file size.
wanted to put all my holiday photos on a picture-sharing site (Photobucket), but it seemed they were too big and it took forever. It was suggested that I reduce their size on Adobe Photoshop and I have downloaded it (Starter Edition 3.2). However, I can't seem to find a facility to do this. What I would really like to do is reduce all of the file sizes at once. Is this possible? Otherwise I will reduce them one by one, but don't know how to do this either.
View 8 Replies View RelatedI read somewhere that in Photoshop you should reduce images in steps, but never in one big step. For example, if you had an original 3200 pixels wide, you should first reduce it to 3100 pixels wide, then 3000, then 2900, and so on, down to about 2000; then, if your target is 800 pixels, you may increase the interval.
Does this rule of thumb still hold true in CS4? I've tried one-step reductions, and these tired old eyes could not tell the difference ...
I have made this artwork in illustrator (included an image of it below). it is for newspaper print. When i export it to Illustator PDF the size is MASSIVE 40mb! I sent this to them via a link hoping to get away with it but they replied & said please send as 3mb as the file it to big! What am i going to do now? I have flatterened transparency & rasterized everything in Illy but it only makes it larger.
the size of the overall artwork is
W:262mm
H:190mm
I have a simple angle iron (3 x 2 x 1/4 w/t x 3.00 LG.) .ipt that has 8 thru holes in it file size is 962 MB the file will not open however 3 days ago the file was normal size (160-180KB) and opened fine when i attempt to open this file it eats up about 8 gig of RAM then gives me PmBRepSegment in database then aborts the open process but Task Image Inventor.exe retains the 8+ gig of memory as if a file is open, what caused this file to grow 900 times in size when nothing was done to it?
View 4 Replies View RelatedThis problem transfer from one file to another by copying some of it's content to another file. Any command were done just to try to reduce a file but still isn't working.
The problem became serious when each file became at-least 200mb per 2D dwg. Our Tech support said it was a kind of Number virus where it alters the log in each file to have a bigger file size.
Though this happens only in CAD, and certain files/projects were affected. The old and previous file unused where still intact. Only those new ones that we are currently accessing.
I created a 1318x358 PNG (300DPI, Anti-Aliasing - Type Optimized) from Illustrator. Now I reduced the image in Photoshop from 1318 to 800 pixels, and it is creating some edge blurring. Look at the image below.
How can I take away that blurring effect when reducing the size? Even if I save it as PNG-24, with highest quality settings, it still does that effect.
