When I load a set of files into RAM Player they do not always fully load. In two separate instances 1381 frames have loaded (in todays example there are 1921 frames rendered in the set).
I guessed that stopping at 1381 frames on two occasions was a bit curious and maybe thought the memory limit was not set high enough. I increased this but no change.
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedMy current goal is to specify the rotation and translation of an object using a text file full of numbers. I have been told that I should import a "move" file. However, I can't seem to find any kind of reference about the move file format or how to use it. I see in the import dialog box that there is a file type called "move" but I don't know how to format the data that I put into the "move" file.
Also, I tried to export a "move" file so I could take a look at what Maya generates, but I keep getting the error "// Error: Could not save file "C:/My Documents/maya/projects/body_in_ocean/scenes/examplemove.mov".
I created a group with my object in one file, referenced it in my working file, moved the group around and set some keys in the working file, but I can't seem to export any move data. How to get this to work?
i am using 3ds max design 2011 for making architectural walk through s,i usually render the frame at 740*576 size(300 dpi)and save as tiff sequence.then i will make avi file in after effects(with out any compression). After that when i play the whole movie,the movie will not go smoothly its getting jerks.what the wrong i am doing.i tried with 15 frames per sec and 30 frames per sec.
View 1 Replies View RelatedI am on a Mac Retina with 16GB of memory . LR4.3 most of the time will not load a full resolution image in the Library module. I can switch to the develop module and it will load. When I return to the Library module it will stay loaded at full resolution. Switching to a different photo in Library will start the same process over again. In the Library module the full resolution will load when a 1:1 is selected. And this happens consistently. But the Library module will not load full resolution by default.A
View 5 Replies View RelatedI am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
When I open channel A and click on the .avi file I want to watch in the RAM player nothing happens. However, once I rename the file .mpeg it works. This includes all .avi files not just the one I'm trying to work on at the moment. How I can play the .avi files in the RAM player since I don't want to have to convert to .mpeg every time I view a video. I'm using 3ds Max 10 on Vista 64.
PS. This seems to be an extension of problems I've been having in general with previewing my animations. Whenever I try to preview my Max animations as .avi files windows media player seems unable to recognize them. I tried changing the default player for .avi files to quicktime and vlc however max doesn't seem to recognize them. If I navigate to my preview folder though and open them from there I can play them in any player except for Windows Media which seems unable to recognize .avi's.
I'm working on a project where I need to duplicate all animated sequences for both a male and female character. I currently have two biped rigged characters. I animate one, save the .bip animation file and then load into the other. I check the boxes for "Load max Objects" as I have some objects (like a glass of water) set as an IK pivot object. It loads those into the new scene along with the new pose, but the pose goes wrong, thought just with the arms (which are incidentally the only parts that have a seperate object as an IK pivot object.)
Here's a screenshot to show what I mean:
This incorrect animation happens whether the .bip animation file I save is loaded into the other character or loaded into the same character in it's original T-pose.
After animating, controls will not show up in the graph editor for fine tuning.
View 1 Replies View RelatedI have a main page with a container (named BoxPlay) and a button. And I have an other page (page2) with severals animations on it : animation 1, animation2...
I would like to load the page2 but directly with one of his animations.
Code of the button :
var container = sym.$("BoxPlay");
container.append('<iframe id="currentPageHolder" width="'+container.width()+'" height="'+container.height()+'" src="pages/GallerieHomePage/GallerieHomePage.html" frameborder="0" scrolling="no"></iframe>');
How can I specify to load also animation 1 or animation 2 ?
I am trying to find out if it is possible to start/load the animation based on a specific point in its timeline? The animation I am creating is a parallax animation based on mouse position and I am trying to load it in the middle of the animation and based on the users mouse position will play forward or backwards from that point.
View 2 Replies View RelatedSo, this is something that's been a nuisance for a while now, and I think it's time for me to inquire seriously about a fix for it. I'm working with some ani's in max's timeline, and everyso often I find it starts to make use (or I start to make use...?) of "ticks"...I really dont wnat them, and in fact they cause a whole bunch of issues when adjusting keyframes as Im sure some of you can imagine.
Im not sure if it does this because of a setting I choose ( I always start animating in frames mode), or because I often will work in Key mode when Im swapping in a certain pose often...since all my character's animations are in one timeline.
The big question is...is there a way to FORCE these "ticked" keys onto full frames somehow? I've looked through all the timewarps I can find, and adjust <i>their</i> keys to full frames, but eventually it still goes back to ticks....WHAT MUST I DO!!!!! maybe there's a script, or Im missing something obvious?
I keep resetting to frames mode, and rechecking timewarps...to no longterm avail.
I am doing a rendering of a timeline with approx 1900 frames. I am using mental ray as my render engine. After the rendering runs its course, approx 20 hours, it completes with no problems. I open the saved avi file and the clip only captures the first say half of the rendered frames. I have done this 3 times now and for what should be approx a 60 sec clip i only get 36 sec.
View 4 Replies View RelatedI am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example 1999.63.102 So the digital file would be named 1999.63.102.jpg (or tif).
When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".
i just upgraded from 7 to CS...looks good and would like to keep using it. Only problem is whenever i try to open my .psd files created in 7, i'm giving the message:
"Could not complete your request because the layer is not a valid text layer"
Is there anyway to overcome this, as i need to access all of last years work.
I only changed to CS as when 7 finished loading the fonts in the startup screen, it would jump back to windows and close PS?
just upgraded from CS5 to CS6 (originally had CS3) now when trying to load images which were loaded in 2002 when using CS3 I get an error message 'windows cannot find C:Program files(x86)Adobe PhotoshopCS3Photoshop.exe Make sure you typed the name correctly then try again' I assume that there is an association with a file that no longer exists how can I change this?
View 7 Replies View Relatedstarted a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies View RelatedJust got PSE 12, I have added mutliple brushes without difficulty. But I can not get the ASL files I want to add to show up. I have loaded them into the correct folder in presets but they are not showing when I open 12.
View 1 Replies View RelatedI'm seeing my InDesign applications is getting crashed while loading the XML files, please find below the crash report.
Problem signature:
Problem Event Name: APPCRASH
Application Name: InDesign.exe
Application Version: 8.0.2.413
Application Timestamp: 51fb7197
[code]....
When I load a gile it crashes. I've only tried loading JPG's. I have also uninstalled and re-installed it.
View 1 Replies View RelatedI have:
AMD Athlon 64x2 Dual Core Processor 6000+ 3.0 GHz.
3 Gig's Ram.
32 bit Windows Vista Home Premium.
Photoshop CS3 Extended.
It takes 20 Seconds+ to open a jpg or to create a new file even 50x50 pixels. Loading the actual program is very quick though.
I have a network printer, but I set Microsoft XPS Document Writer as my default.(Its a local printer)
I Run PS CS3 as admin and with compatability for xp sp2.
Photoshop C3 has been loading even the smallest of photo files very slowly -- about 10-15 seconds for one.
it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
the Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
View 8 Replies View RelatedIs it possible to disable the dialog for choosing how transparency is treated ? If you to batch operations on EXR files you have to confirm for every file!
View 3 Replies View RelatedIf it is possible to load old r14 FAS files into more recent ACAD versions, will it work on r2012 f.e.
View 2 Replies View RelatedI've been working with Canon .CR2 files and later Adobe .dng files for years, and could always open them in Photoshop. Now, with PS CC, the files open as small previews (420 x 280 px) instead of the full size. This means I cannot work with my photographs!
View 7 Replies View Relatedi have been able to recover most lost data and images, jpegs etc using a recovery program...
BUT for some reason not all my photoshop images/files will load, others try to load but i get this error message come up "could not complete your request because the file is not compatible with this version of photoshop"
I have added a few custom autocad commands that are specific to my scenario. I created Ribbon (and Menu for classic mode) for these commands and they are working fine. The only issue is that these Buttons (Ribbon and Menu for classic mode) are not loading the images(icons). All I get is a cloud image for both commands.
I have used 16X16 for small image and 32X32 for large image. Both are bmp files. These are attached to the custom Autocad command that I am using. The commands themselves are working fine, except for the image which is not displayed. In short, what can be the possible reason for images not showing up?
I am running LT 2012 and it keeps freezing at the Loading customiztion files point... This locks the whole pc and I need to do a hard reset.
View 7 Replies View RelatedI have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies View RelatedI have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.
View 21 Replies View Related