I have:
AMD Athlon 64x2 Dual Core Processor 6000+ 3.0 GHz.
3 Gig's Ram.
32 bit Windows Vista Home Premium.
Photoshop CS3 Extended.
It takes 20 Seconds+ to open a jpg or to create a new file even 50x50 pixels. Loading the actual program is very quick though.
I have a network printer, but I set Microsoft XPS Document Writer as my default.(Its a local printer)
I Run PS CS3 as admin and with compatability for xp sp2.
Photoshop C3 has been loading even the smallest of photo files very slowly -- about 10-15 seconds for one.
it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
I have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.
View 21 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
Photoshop CC is loading slow. I dont have much loaded.I am running it with MagicPicker 3, it wont save the tool the way I left it. Digital Heavens tool panel (easy to run actions)AD_Artbox, that now wont run the tools - panel to run actions. It did before the update.
View 7 Replies View Relatedproblem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
I am working with Adobe Edge to create an HTML5 website. My problem is the website load very slow because it downloads all images before browser render the web. Is there any configuration or code change to make the image load after click or mouse over event?
View 1 Replies View RelatedJust deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies View RelatedWhen I am sorting photos in the library loupe mode, the thumnails always show loading as I am trying to make my pics and rejects. How to speed up the process? I have already increased my cache to 100.
View 2 Replies View RelatedWe have 13 machines that are identical hardware and software; Windows 7 and the Autodesk Product Design Suite 2012 as well as the Vault 2012 Client. Two of these machines are exhibiting the following behavior: Connected to our LAN with access to the internet not loading Vault on startup Inventor loads in 68 seconds.Disconnected from our LAN with no access to the internet not loading Vault on startup Inventor loads in <10 seconds. I have tested this with our AV turned on and off with no changes in the above noted behavior. These two machines loaded Inventor 2011 in repsectable times ~<30 seconds.
Now this tells me that when Inventor is loading it is trying to go somewhere when there is a network connection. But where and what can I do to make it stop?
I create or load an image it is always darker than it is actually supposed to be. When I go to save a created image, it will always be lighter. What I want to know is how to make the image on the screen the same color as when I save it to my computer.
Example: I was following a tutorial to create a banner and when I finished (without saving) it turned out like this. Now, the image from the tutorial is actually suppose to look like this when finished. Then, after I saved the image it looked like how it was suppose to look.
I have a video I’ve edited (text captions etc) in CS6 - Can I somehow slow it down ie create a slow motion effect and then export that?
View 6 Replies View RelatedI want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View Relatedi just upgraded from 7 to CS...looks good and would like to keep using it. Only problem is whenever i try to open my .psd files created in 7, i'm giving the message:
"Could not complete your request because the layer is not a valid text layer"
Is there anyway to overcome this, as i need to access all of last years work.
I only changed to CS as when 7 finished loading the fonts in the startup screen, it would jump back to windows and close PS?
just upgraded from CS5 to CS6 (originally had CS3) now when trying to load images which were loaded in 2002 when using CS3 I get an error message 'windows cannot find C:Program files(x86)Adobe PhotoshopCS3Photoshop.exe Make sure you typed the name correctly then try again' I assume that there is an association with a file that no longer exists how can I change this?
View 7 Replies View RelatedJust got PSE 12, I have added mutliple brushes without difficulty. But I can not get the ASL files I want to add to show up. I have loaded them into the correct folder in presets but they are not showing when I open 12.
View 1 Replies View RelatedWhen I load a gile it crashes. I've only tried loading JPG's. I have also uninstalled and re-installed it.
View 1 Replies View RelatedPreview panel "preview" freezes indefinitely.App very slow to load while creating new previews. (previews take forever to create and update)Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections) This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections) This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
the Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
View 8 Replies View RelatedIs it possible to disable the dialog for choosing how transparency is treated ? If you to batch operations on EXR files you have to confirm for every file!
View 3 Replies View Relatedi have been able to recover most lost data and images, jpegs etc using a recovery program...
BUT for some reason not all my photoshop images/files will load, others try to load but i get this error message come up "could not complete your request because the file is not compatible with this version of photoshop"
I have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies View RelatedI've been using PS CS4 since release and upgraded to CS6 Master Collection last year.Since my OS broke down some weeks ago (RAM broke), i gave Photoshop CC a try. At the same time I moved in new rooms and couldnt get my hands on the DVD of my CS6 resting somewhere at home...So I tried CC.
Right now im using it with some big files. Filesize is between 2GB and 7,5 GB max. (all PSB)Photoshop seem to run fast in the very beginning, but since a few days it's so unbelievable slow that I can't work properly. if it is caused by the growing files or some other issue with my machine.
The files contain a large amount of layers and Masks, nearly 280 layers in the biggest file. (mostly with masks)The images are 50 x 70 cm big @ 300dpi.
When I try to make some brush-strokes on a layer-mask in the biggest file it takes 5-20 seconds for the brush to draw... I couldnt figure out why.And its not so much pretending on the brush-size as you may expect... even very small brushes (2-10 px) show this issue from time to time.
Also switching on and off masks (gradient maps, selective color or leves) takes ages to be displayed, sometimes more than 3 or 4 seconds.The same with panning around in the picture, zooming in and out or moving layers.It's nearly impossible to work on these files in time.never seen this on CS6.
Now I wonder if there's something wrong with PS or the OS. But: I've never been working with files this big before.In march I worked on some 5GB files with 150-200 layers in CS6, but it worked like a charm.
SystemSpecs:
I7 3930k (3,8 GHz)
Asus P9X79 Deluxe
64GB DDR3 1600Mhz Kingston HyperX
GTX 570
2x Corsair Force GT3 SSD
Wacom Intous 5 m Touch (I have some issues with the touch from time to time)
WIN 7 Ultimate 64
all systemupdates
newest drivers
PS CC
System and PS are running on the first SSD, scratch is on the second. Both are set to be used by PS.RAM is allocated by 79% to PS, cache is set to 5 or 6, protocol-objects are set to 70. I also tried different cache-sizes from 128k to 1024k, but it didn't work a lot. When I open the largest file, PS takes 20-23 GB of RAM.
The problem is that opening files is painfully slow - having read about the issue with network printers (which I don't have) I have deleted everything listed under printers and re-installed the only printer that I have (which is locally attached via USB, but I deleted it in case Adobe thought is was a network printer). I have tried to create a generic printer (as recommended by Mr Joslin to jangel2 uRL.... but the installation failed and no additional printers were visible in control panel/printers.
I am running Windows 7 on a Dell desktop, with plenty of memory etc. I have a number of external hard drives, and have turned all these on so Photoshop can find them in case it's looking, but this made no difference.
Working with big files...1.5 gig that have 30 to 50 layers and many FX on them.
They are taking a LONG time to open.
In considering updating to a new CPU soon....what affects this problem the most...
CPU
Video card and its amount of RAM
System RAM
Something I am not thinking about?
We have several stations set up globally in various offices using Photoshop CS...
Image files, no matter how small the file is... even a single small JPG takes a good 10-15 seconds to open (win xp) and we frequently need to work with hundreds of images. This seems to be a major problem and from what I find on Google, not uncommon... Code:
I just installed photoshop cs3 on my laptop! I try to open a file i take approximately 2-3 min to load! Any idea's what could be the problem! Oh and they aren't big files! And in case anyone needs to know.....Its a brand new laptop just bought it last week! Its running on a dual core intel at 2.0GHz 4g of ram 512 graphics card!
View 2 Replies View RelatedI have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. I have had to disable the new autosave features, otherwise it just takes far too long.
CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
I am finding the new layer filtering system invaluable so would rather not go back to CS5. I can do to speed up the saving process?
Files are very slow to open (1 minute) in PSE 7 .This has just started after 3 years
View 2 Replies View RelatedI have a new Mac (2x2.4GHz 6-Core Intel Xeon, 12GB Ram, OS X 10.8.2) and the latest version of Photoshop (13.0.4) installed.Besides the general slower behaviour sometimes, opening and saving files with 80+ layers is unacceptably slow..This is like going back 10 years compared to CS5.5
View 10 Replies View RelatedWhy is Bridge CS6 suddenly slow to open files?
View 1 Replies View Related